Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Sep 17, 2013
3:26:28 PM
View profile
Samsung ht-f5500w
Anyone know the uverse code for the samsung HTIB HT-f5500w. I have tried all codes in the manual uverse gave me but all codes will only control the power. Tried everything under DVD and HTIB lists.
Anyone know the uverse code for the samsung HTIB HT-f5500w. I have tried all codes in the manual uverse gave me but all codes will only control the power. Tried everything under DVD and HTIB lists.
0
(0)
  • Rate this reply
View profile
Solved
Sep 17, 2013 4:00:10 PM
0
(0)
ACE - Expert
cmg4sei - Good news for you - If you control the on/off it works. You need to do another step that is not obvious.

When the TV is programmed it is ALWAYS the volume/mute control. That is why you believe it does not work.

To change it - att/ok-955 - enter (bottom right button)

After you do this, the volume control will follow the mode button. If you insert aux between 955 & enter. The control will ALWAYS be the HT.

If you set both the TV and the HT to a mid range, you can vary either by the att mode STB (normal watching. Of course, you have to mute the TV if the HT is providing sound. You need to experiment.

Do not forget the power - Do you want the HT always on?? - att/ok - 977- att - tv - aux - enter will add it to the auto sequence.

Post if you come up with more questions.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Accepted Solution

Samsung ht-f5500w

1,671 views
5 replies
(0) Me too
(0) Me too
Reply
View all replies
(5)
Highlighted
0
(0)
  • Rate this reply
View profile
Solved
Sep 17, 2013 4:00:10 PM
0
(0)
ACE - Expert
cmg4sei - Good news for you - If you control the on/off it works. You need to do another step that is not obvious.

When the TV is programmed it is ALWAYS the volume/mute control. That is why you believe it does not work.

To change it - att/ok-955 - enter (bottom right button)

After you do this, the volume control will follow the mode button. If you insert aux between 955 & enter. The control will ALWAYS be the HT.

If you set both the TV and the HT to a mid range, you can vary either by the att mode STB (normal watching. Of course, you have to mute the TV if the HT is providing sound. You need to experiment.

Do not forget the power - Do you want the HT always on?? - att/ok - 977- att - tv - aux - enter will add it to the auto sequence.

Post if you come up with more questions.
cmg4sei - Good news for you - If you control the on/off it works. You need to do another step that is not obvious.

When the TV is programmed it is ALWAYS the volume/mute control. That is why you believe it does not work.

To change it - att/ok-955 - enter (bottom right button)

After you do this, the volume control will follow the mode button. If you insert aux between 955 & enter. The control will ALWAYS be the HT.

If you set both the TV and the HT to a mid range, you can vary either by the att mode STB (normal watching. Of course, you have to mute the TV if the HT is providing sound. You need to experiment.

Do not forget the power - Do you want the HT always on?? - att/ok - 977- att - tv - aux - enter will add it to the auto sequence.

Post if you come up with more questions.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Samsung ht-f5500w

2 of 6 (1,664 Views)
Solution
0
(0)
  • Rate this reply
View profile
Sep 17, 2013 6:25:10 PM
0
(0)
Contributor

I tried everything that you had listed but I was trying it under the DVD mode button as soon as I changed to AUX button it worked perfectly.  Thanks for the help.

I tried everything that you had listed but I was trying it under the DVD mode button as soon as I changed to AUX button it worked perfectly.  Thanks for the help.

Re: Samsung ht-f5500w

3 of 6 (1,641 Views)
0
(0)
  • Rate this reply
View profile
Sep 17, 2013 6:44:32 PM
0
(0)
ACE - Expert
cmg4sei - Glad you got it working. Thanks for letting me know. I did not notice that your device is a combination amp & dvd. I can see where that adds to the confusion. Do the DVD controls work for you on aux? I would think that the amp would work under DVD. Maybe the remote does not recognize the DVD in the crazy volume software.

You could do both mode buttons - the DVD functions under DVD and the amp functions under Aux, if you can find a code that works. The remote would not know it is one device & not two.

But, that is only if you feel like playing with it. The important thing is you made it useful, Please let me know if you do any more with the DVD button (positive or negative).
cmg4sei - Glad you got it working. Thanks for letting me know. I did not notice that your device is a combination amp & dvd. I can see where that adds to the confusion. Do the DVD controls work for you on aux? I would think that the amp would work under DVD. Maybe the remote does not recognize the DVD in the crazy volume software.

You could do both mode buttons - the DVD functions under DVD and the amp functions under Aux, if you can find a code that works. The remote would not know it is one device & not two.

But, that is only if you feel like playing with it. The important thing is you made it useful, Please let me know if you do any more with the DVD button (positive or negative).
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Samsung ht-f5500w

4 of 6 (1,633 Views)
0
(0)
  • Rate this reply
View profile
May 9, 2016 8:30:01 PM
0
(0)
Contributor
Any way to make it so both att and tv modes control tv volume, while when set to aux mode it will control HTIB volume?
Any way to make it so both att and tv modes control tv volume, while when set to aux mode it will control HTIB volume?

Re: Samsung ht-f5500w

5 of 6 (223 Views)
0
(0)
  • Rate this reply
View profile
May 10, 2016 6:03:56 AM
0
(0)
ACE - Expert

@amalo95 - You have too many choices to give details & you will have to make some level of compromize, so I will not give details for them until you decide which you want to do.

 

If you have an old s-10 remote program it to control the STB volume. This will affect the volume heard from either the TV or AUX. Whichever is on.

 

Or you can program it to follow the mode button & actually control the TV & aux. In att mode it works as above.

 

If you have a new s-20, the first option is available, but I think the second one is not. Instead, the programming is simpler. So, you could reprogram on each use (because the programming is simpler).

 

If you have aux sound, you desrve a Logitech Harmony model 650 remote.

 

How many years have aux sound been available? I guess some folks have been using them forever. In that environment, it was reserved for special occasions. But, I think it has switched to normal viewing.

 

You have to add the complexity of turning one device off & the other on whenever you change which is active. Why bother. You already  paid for the aux sound - use it - always - better sound - less complex.

 

Just set it to always control the aux.

 

Many years ago I tried aux sound, but could not tell the difference from TV sound because the TVs could produce good sound.

 

I now have three TVS to watch (see avatar)  The Panny has great sound. The other two poor sound. So, I got a ZVOX sound bar & put each TV on an input & use the ZVOX for all sound. It lets me cycle to the TV I want to hear instead of turning one off & another on.

 

I realize my case is different than yours, but my point is simplicity is a feature that you should take advantage of.

@amalo95 - You have too many choices to give details & you will have to make some level of compromize, so I will not give details for them until you decide which you want to do.

 

If you have an old s-10 remote program it to control the STB volume. This will affect the volume heard from either the TV or AUX. Whichever is on.

 

Or you can program it to follow the mode button & actually control the TV & aux. In att mode it works as above.

 

If you have a new s-20, the first option is available, but I think the second one is not. Instead, the programming is simpler. So, you could reprogram on each use (because the programming is simpler).

 

If you have aux sound, you desrve a Logitech Harmony model 650 remote.

 

How many years have aux sound been available? I guess some folks have been using them forever. In that environment, it was reserved for special occasions. But, I think it has switched to normal viewing.

 

You have to add the complexity of turning one device off & the other on whenever you change which is active. Why bother. You already  paid for the aux sound - use it - always - better sound - less complex.

 

Just set it to always control the aux.

 

Many years ago I tried aux sound, but could not tell the difference from TV sound because the TVs could produce good sound.

 

I now have three TVS to watch (see avatar)  The Panny has great sound. The other two poor sound. So, I got a ZVOX sound bar & put each TV on an input & use the ZVOX for all sound. It lets me cycle to the TV I want to hear instead of turning one off & another on.

 

I realize my case is different than yours, but my point is simplicity is a feature that you should take advantage of.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Samsung ht-f5500w

6 of 6 (183 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post