Ask a question
Search in DIRECTV Forums

DIRECTV Forum

Reply
Posted May 4, 2014
7:26:04 PM
Rc64r remote and Hr21-200

My original RC64R remote was dropped and would not work properly, but I have an extra RC64R remote, it will not control the HR21-200, how can I reprogram this remote to control this receiver, I've reset it and entered codes 00001-00004 and a few others, nothing works, the remote is unresponsive ( the lights do light up, batteries are ok)? Help!!

My original RC64R remote was dropped and would not work properly, but I have an extra RC64R remote, it will not control the HR21-200, how can I reprogram this remote to control this receiver, I've reset it and entered codes 00001-00004 and a few others, nothing works, the remote is unresponsive ( the lights do light up, batteries are ok)? Help!!

Rc64r remote and Hr21-200

289 views
4 replies
(0) Me too
(0) Me too
Reply
View all replies
(4)
0
(0)
  • Rate this reply
View profile
May 4, 2014 7:33:32 PM
0
(0)
Employee

perhaps you need to set the receiver back to IR or you may have to set the remote to RF as pointed below

Slide switch to DTV

1. Press and hold MUTE and SELECT (LED flashes twice)

2. Enter 961

3. press CH UP

4. Enter the last 6 digits of the RID number

5. Press SELECT

perhaps you need to set the receiver back to IR or you may have to set the remote to RF as pointed below

Slide switch to DTV

1. Press and hold MUTE and SELECT (LED flashes twice)

2. Enter 961

3. press CH UP

4. Enter the last 6 digits of the RID number

5. Press SELECT

*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: Rc64r remote and Hr21-200

2 of 5 (6 Views)
0
(0)
  • Rate this reply
View profile
May 7, 2014 9:57:12 PM
0
(0)
Tutor

WWhat is and where a the RID number ... So far none of those has worked.

WWhat is and where a the RID number ... So far none of those has worked.

Re: Rc64r remote and Hr21-200

3 of 5 (6 Views)
0
(0)
  • Rate this reply
View profile
May 8, 2014 3:15:36 AM
0
(0)
Expert

The receiver ID number is 12 digits.  It can be found by (a) pressing and holding the remotes info button (b) by logging into your account at www.directv.com or (c) from the tag on the receiver, usually in the rear.

The receiver ID number is 12 digits.  It can be found by (a) pressing and holding the remotes info button (b) by logging into your account at www.directv.com or (c) from the tag on the receiver, usually in the rear.

Re: Rc64r remote and Hr21-200

4 of 5 (6 Views)
0
(0)
  • Rate this reply
View profile
May 9, 2014 10:33:03 AM
0
(0)
Tutor

Got it! That worked! Thanks!

Sent from my iPad

Got it! That worked! Thanks!

Sent from my iPad

Re: Rc64r remote and Hr21-200

5 of 5 (6 Views)
Share this post
Share this post