Reply
Posted Feb 1, 2013
5:21:49 PM
View profile
How do I program my remote?

I just got a new TV and wanted to find out how to program it with my Uverse Remote?

0
(0)
  • Rate this reply
View profile
Solved
Dec 30, 2013 10:51:18 AM
0
(0)
Community Support

Learn about options for programming your remote using this helpful video.

 

*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.
Accepted Solution

How do I program my remote?

4,646 views
4 replies
(0) Me too
(0) Me too
Post reply
Cancel
Submit
View all replies
(4)
0
(0)
  • Rate this reply
View profile
Feb 2, 2013 11:13:42 AM
0
(0)
Scholar

Have you tried to steps provided in this link?

Programming the U-verse Black Remote

Re: How do I program my remote?

2 of 5 (4,646 Views)
0
(0)
  • Rate this reply
View profile
Solved
Feb 3, 2013 7:59:27 AM
0
(0)
ACE - Expert

Programming the U-verse Black Remote

Version 8

  

  

BlackRemote.png  U-verse Black Standard Remote Programming Steps

Important Note

If the programming is interrupted or inactive for more than 30 seconds, the mode keys will flash eight times. This indicates the remote has left the programming mode and returned to normal operation without saving any changes.

                                                                                                                                                                                                                                             

To use the U-verse TV Black standard remote control with your TV, DVD or auxiliary equipment, you'll need to program one or more of the equipment buttons (TV, DVD or AUX) at the top of the remote control, as follows:

    1. Turn on the device to be programmed and aim the remote at it.
    2. Press and hold the desired Mode key or or to be programmed.
      • Without releasing the mode key, press and hold the   ENTER button, then release the keys.
      • Press the SCAN\FF button  repeatedly until the device turns off – wait briefly between presses. The Mode button will blink to indicate presses.
      • When a valid code has been reached, the device will turn off.
      • If the equipment does not turn off, and the selected mode button flashes 8 times, please start over at Step 1 above.
    3. Press the POWER button on the remote to turn the equipment back on.
      • If the equipment does not turn on, you may have pressed the SCAN\FF button too many times.
      • Press the REW\SCAN button and test the POWER button again.
      • Continue pressing REW\SCAN followed by POWER until the device turns on.
    4. Check additional buttons (MUTE, VOLUME, PAUSE, PLAY, etc) for the device being programmed.
    5. Once the buttons are functioning, press the ENTER key to save the programming. The appropriate mode key will give a long flash indicating successful programming.
      • If there is a problem with any of the buttons, press the SCAN\FF button once, then re-test the function. Repeat until the function works. Then retest that POWER still turns the device OFF/ON.

  

 

 

  

  

  

  

Average User Rating

(0 ratings)

My Rating:

 

Comments

 

Add a comment

There are no comments on this document.

  

 

AT&T on the Web

att.com
Shop, Service, Support.

att.net
E-mail - News - Weather & More

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: How do I program my remote?

3 of 5 (4,646 Views)
Solution
0
(0)
  • Rate this reply
View profile
Feb 3, 2013 10:14:47 AM
0
(0)
Employee

For the Black AT&T Universal Remote Control, this is how to do an automatic search on the correct TV code.

1. Press and hold the TV button.

2. While holding down the TV button, press and hold the Enter button

3. Release both buttons at the same time. (the 4 mode buttons at the top should flash twice. If they don't, repeat the procedure.)

4. Repeatedly press the fast-forward button (FF) until the TV turns off.

5. If the TV turned off, turn it back on by pressing the power button. (If the TV doesn't turn back on, you may have pressed the FF button too many times. You can try going back to the correct code by pressing the rewind button (REW) and try turning the TV back on through the Power button.

6. If the TV turned on, press Enter to finalize the programming.

After the above procedures, do not forget to press (and, maybe, hold) the AT&T button on the remote control so that it will control the box and not just the TV.

*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: How do I program my remote?

4 of 5 (4,646 Views)
0
(0)
  • Rate this reply
View profile
Solved
Dec 30, 2013 10:51:18 AM
0
(0)
Community Support

Learn about options for programming your remote using this helpful video.

 

*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: How do I program my remote?

5 of 5 (3,588 Views)
Solution
Share this post
Share this post