U-verse Forums

Reply
Posted Feb 5, 2011
3:14:07 PM
View profile
Guide on how to Program AT&T Remote Control to your TV

Here's a guide on how to Program the AT&T Universal Remote Control to your TV.

 

Click Here for the Link. It also includes the codes for different brands of TV. If the guide help you please put a FeedBack or Rate me on the guide website.

 

Thanks

Previous Sup - AT&T Uverse

RL6262

Here's a guide on how to Program the AT&T Universal Remote Control to your TV.

 

Click Here for the Link. It also includes the codes for different brands of TV. If the guide help you please put a FeedBack or Rate me on the guide website.

 

Thanks

Previous Sup - AT&T Uverse

RL6262

0
(0)
  • Rate this reply
View profile
Solved
Feb 25, 2013 11:31:28 AM
0
(0)
Former Community Manager
Edited by ATTU-verseCare on Feb 25, 2015 at 11:24:45 AM

Here is an article that discusses programming your remote control: http://www.att.com/esupport/article.jsp?sid=KB407920#fbid=Z6SDS7kpLnk

 

If still having problems, check out this post here.

 

 

--------------

As of May 1st, I am no longer serving as the Community Manager for AT&T. This account will no longer be able to accept private messages. If you have an account related issue, please send a private message to ATTCustomerCare.

Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.

I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.
Accepted Solution

Guide on how to Program AT&T Remote Control to your TV

632,703 views
23 replies
(0) Me too
(0) Me too
Post reply
Cancel
Submit
Replies
(23)
0
(0)
  • Rate this reply
View profile
Feb 26, 2011 6:16:21 AM
0
(0)
Contributor

Samsung lists about 20 factory codes.  How can you tell which one matches the TV you have?

Samsung lists about 20 factory codes.  How can you tell which one matches the TV you have?

Re: Guide on how to Program AT&T Remote Control to your TV

2 of 24 (632,328 Views)
0
(0)
  • Rate this reply
View profile
Feb 26, 2011 7:19:05 AM
0
(0)
ACE - Expert

You need to try the codes to see which one works for your TV.

You need to try the codes to see which one works for your TV.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

3 of 24 (632,314 Views)
0
(0)
  • Rate this reply
View profile
Feb 26, 2011 2:02:13 PM
0
(0)
Expert

You can also try the App on your TV:

Menu > Help > System Setup > Program Your UV Remote

You can also try the App on your TV:

Menu > Help > System Setup > Program Your UV Remote

Re: Guide on how to Program AT&T Remote Control to your TV

4 of 24 (632,288 Views)
0
(0)
  • Rate this reply
View profile
Mar 4, 2011 7:23:57 PM
0
(0)
Tutor

I cannot find any codes for my TV - it is a Dynex. My U-Verse remote will run the channels, but not the power or the volume. What next?

I cannot find any codes for my TV - it is a Dynex. My U-Verse remote will run the channels, but not the power or the volume. What next?

Re: Guide on how to Program AT&T Remote Control to your TV

5 of 24 (632,043 Views)
0
(0)
  • Rate this reply
View profile
Mar 19, 2011 3:02:17 PM
0
(0)
Contributor

I have a Samsung TV  and a seperate Samsung Sound bar.  How do I program the U-verse remote to turn the TV on and off, but the volume is the sound bar.  Don;t see a code for sound bar that I guess I would program under Aux.  

 

 

I have a Samsung TV  and a seperate Samsung Sound bar.  How do I program the U-verse remote to turn the TV on and off, but the volume is the sound bar.  Don;t see a code for sound bar that I guess I would program under Aux.  

 

 

Re: Guide on how to Program AT&T Remote Control to your TV

6 of 24 (631,531 Views)
0
(0)
  • Rate this reply
View profile
Mar 19, 2011 10:38:49 PM
0
(0)
Expert

Take a look in this post for other codes that might work.

Take a look in this post for other codes that might work.

Re: Guide on how to Program AT&T Remote Control to your TV

7 of 24 (631,487 Views)
0
(0)
  • Rate this reply
View profile
Oct 15, 2011 5:40:44 PM
0
(0)
Tutor

The following link has an updated list for the universal black remote that had a different set of codes.

 

Link

The following link has an updated list for the universal black remote that had a different set of codes.

 

Link

Re: Guide on how to Program AT&T Remote Control to your TV

8 of 24 (597,213 Views)
0
(0)
  • Rate this reply
View profile
Oct 15, 2011 5:42:20 PM
0
(0)
Tutor
The differences i encountered in the lists were related to the Toshiba series codes.
The differences i encountered in the lists were related to the Toshiba series codes.

Re: Guide on how to Program AT&T Remote Control to your TV

9 of 24 (597,214 Views)
0
(0)
  • Rate this reply
View profile
Aug 28, 2012 4:19:09 PM
0
(0)
Contributor

I have programmed the u-verse to turn my Sony receiver on and off, only one of the codes work. However, it will not adjust the sound through the receiver, it adjusts the volume on the tv. I seem to remember having to do something with the cable remote previously. Please help!

I have programmed the u-verse to turn my Sony receiver on and off, only one of the codes work. However, it will not adjust the sound through the receiver, it adjusts the volume on the tv. I seem to remember having to do something with the cable remote previously. Please help!

Re: Guide on how to Program AT&T Remote Control to your TV

10 of 24 (437,380 Views)
0
(0)
  • Rate this reply
View profile
Aug 28, 2012 6:17:34 PM
0
(0)
ACE - Master
dyoung78 - You are correct. The code for customizing the volume control is 955.
Press att/ok - 955 - att-enter to have the volume always control the STB.

If you leave out the att button the control will follow whichever mode button is pressed. Since you want the att button to be active to change channels this may be a good choice.

Just curious why you want the STB control instead of the TV.
dyoung78 - You are correct. The code for customizing the volume control is 955.
Press att/ok - 955 - att-enter to have the volume always control the STB.

If you leave out the att button the control will follow whichever mode button is pressed. Since you want the att button to be active to change channels this may be a good choice.

Just curious why you want the STB control instead of the TV.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

11 of 24 (437,307 Views)
0
(0)
  • Rate this reply
View profile
Aug 29, 2012 8:52:32 AM
0
(0)
ACE - Master
Edited by aviewer on Aug 29, 2012 at 9:38:37 AM

dyoung78 - Rereading your post I think your request was for an HT like amplifier/receiver. not the STB. Been reading too many posts where people call the STB a receiver.

But the answer is the same - If you press the aux button the volume control will always be the Sony. No mode button & you need to press the aux button while watching to control the Sony.
How about turning everything on at once? Code - 977.
Press att/ok- 977- att- tv-dvd-aux -enter Then one power push turns everything on.

dyoung78 - Rereading your post I think your request was for an HT like amplifier/receiver. not the STB. Been reading too many posts where people call the STB a receiver.

But the answer is the same - If you press the aux button the volume control will always be the Sony. No mode button & you need to press the aux button while watching to control the Sony.
How about turning everything on at once? Code - 977.
Press att/ok- 977- att- tv-dvd-aux -enter Then one power push turns everything on.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

[ Edited ]
12 of 24 (437,073 Views)
0
(0)
  • Rate this reply
View profile
Solved
Feb 25, 2013 11:31:28 AM
0
(0)
Former Community Manager
Edited by ATTU-verseCare on Feb 25, 2015 at 11:24:45 AM

Here is an article that discusses programming your remote control: http://www.att.com/esupport/article.jsp?sid=KB407920#fbid=Z6SDS7kpLnk

 

If still having problems, check out this post here.

 

 

--------------

As of May 1st, I am no longer serving as the Community Manager for AT&T. This account will no longer be able to accept private messages. If you have an account related issue, please send a private message to ATTCustomerCare.

Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.

I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Here is an article that discusses programming your remote control: http://www.att.com/esupport/article.jsp?sid=KB407920#fbid=Z6SDS7kpLnk

 

If still having problems, check out this post here.

 

 

--------------

As of May 1st, I am no longer serving as the Community Manager for AT&T. This account will no longer be able to accept private messages. If you have an account related issue, please send a private message to ATTCustomerCare.

Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.

I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: Guide on how to Program AT&T Remote Control to your TV

[ Edited ]
13 of 24 (262,932 Views)
Solution
0
(0)
  • Rate this reply
View profile
Mar 21, 2013 6:39:30 AM
0
(0)
Mentor

I tried every single one and none of them worked. We have just come to accept that we have to use two remotes - bummer.

I tried every single one and none of them worked. We have just come to accept that we have to use two remotes - bummer.

Re: Guide on how to Program AT&T Remote Control to your TV

14 of 24 (241,589 Views)
0
(0)
  • Rate this reply
View profile
Mar 21, 2013 6:48:32 AM
0
(0)
ACE - Master
kathmat - You cannot find a code for your TV?? What is make & model?

How about a Logitech Harmony? Least expensive is a model 200 refurb at newegg.com, $18 incl shipping.

I have recommended to many people that were unable to find codes to support their devices with the U-verse remote that they get a Logitech Harmony remote.
 
Many of those people feel they do not want to, or should not have to, spend their own money for a remote.
 
Others, have a very complex setup and are willing to spend their money to maximize their viewing experience.

The U-verse remote is effective for some subset of basic control functions on the most popular equipment, The Harmony provides full control of complex setups across a broader range of equipment.

Until sometime in 2011 the Harmony only offered expensive models (over $100). In 2011 they introduced the model 300 ($30) followed by the model 200 ($20). These only support one activity (Not many for a Harmony, but same as U-verse) - Watch TV.
 
This writeup shows that, even though the basic descriptions sound the same, there are functional advantages to the Harmony. The question is - Is it worth spending $$ for the Harmony.

Basic Similarity (Logitech Harmony Model 300 vs. U-verse remote) -
 
Both can control four devices (STB, TV, DVD, Aux) under one activity - Watch TV.

Logitech Harmony Model 300 advantages -
 
Must be able to do something no other remote can do to convince you to spend $30 to buy it so Logitech can make a profit.
 
Monster library of supported devices built on budget for expensive remotes (amazing how libraries grow over the years).

You can predetermine support of make & model via web site (http://myremotesetup.com/EasyZapper/New/Main.asp?WebProcessAction=Start&ReturnUrl=%2FEasyZapper%2F%2...

Since device support is defined in detail, a Logitech customer service rep (CSR) can help with any problems. When anything new comes out it can be added to your existing remote via download.
 
To program - Enter device make model in computer  based wizard. When device is supported, all functions are supported. IR signals can be learned from device remote.
 
IR/function/button  map - You can map any button to any function. You can pick buttons based on your preference, instead of someone else's. Logitech can add any new IR code format to function mapping via download. CSR can download changes that affect only you,
 
Watch TV button - Turns on/off programmed devices. Sets correct input. Ability to sequence devices and introduce delay between devices.
 
Change from Watch TV mode to individual device control with one button push and vice-versa. Same volume/mute buttons will affect different devices (STB, TV, HT) depending on device selected and the one user selected for the Watch TV activity. Note that the U-verse phantom mute can be un-muted with four logical button pushes - device mode, STB, mute, return to watch TV mode.
 
Able to buy more advanced remotes for more money - Each step up adds more devices, more activities(e.g. Watch OTA, Watch DVD, Watch TV with HT sound), more display (LCD screen) of functions & recharge-ablity .

Multiple activities appears to be a concept unique to the Logitech Harmony. It allows the same buttons to be programmed to different sets of inputs/functions/devices based on what the viewer is watching (i.e. an activity). The button map is unique to the activity. It can be as similar or different between activities/devices as you need it to be. Each activity has its own start up sequence to power up the selected devices & set inputs needed for continuity. It is especially valuable for complex setups and/or people with only basic knowledge of the operation of the remote.
 
*****************************************************************************************************

U-verse remote limitations -
 
U-verse  remote is provided free to watch U-verse TV. Support for some functions on some other devices is included so that it can be called "universal". But there is no business driver to spend money to assure full support of all functions on all possible devices .
 
Limited library of supported devices. Vague lists by type/mfgr. No model detail. No definitive/comprehensive list of codes. No "not supported" statement. If support is not accomplished, there is no way to find out if it should be supported until you find that the remote works for you. Since device support is not defined in detail, customer service rep cannot help with problems.
 
To program- Enter an arbitrary code that may be difficult (or impossible) to determine or step through every possible entry using the search method. Possibly finding some partially supported sets along the way.  No IR learning.
 
IR/function/button  map - Button/IR map cannot change (need new physical remote). IR/function map can only change if U-verse globally changes STB software. No ability to provide individual tuning.
 
Watch TV (ATT/power) -  Turns on/off programmed devices. Does not set input. No ability to sequence devices or introduce delay.
 
Default mode of operation is Watch TV (Channel change on STB, Volume on TV, Power up STB/TV). To vary operation requires reprogramming with more arbitrary codes applied to individual functions. No clear distinction between Watch TV and individual device control (i.e. It is difficult to change operation between Watch TV and controlling individual devices by programming with codes.)

To clear phantom mute - att/ok - 955 - att - enter - mute - att/ok - 955 - tv - enter. 12 button pushes, where two are two finger. If you can remember how to do it.
 
Point anywhere remote is the only extra cost upgrade - provides RF (with STB pairing) and learning IR.

*************************************************************************************

kathmat - You cannot find a code for your TV?? What is make & model?

How about a Logitech Harmony? Least expensive is a model 200 refurb at newegg.com, $18 incl shipping.

I have recommended to many people that were unable to find codes to support their devices with the U-verse remote that they get a Logitech Harmony remote.
 
Many of those people feel they do not want to, or should not have to, spend their own money for a remote.
 
Others, have a very complex setup and are willing to spend their money to maximize their viewing experience.

The U-verse remote is effective for some subset of basic control functions on the most popular equipment, The Harmony provides full control of complex setups across a broader range of equipment.

Until sometime in 2011 the Harmony only offered expensive models (over $100). In 2011 they introduced the model 300 ($30) followed by the model 200 ($20). These only support one activity (Not many for a Harmony, but same as U-verse) - Watch TV.
 
This writeup shows that, even though the basic descriptions sound the same, there are functional advantages to the Harmony. The question is - Is it worth spending $$ for the Harmony.

Basic Similarity (Logitech Harmony Model 300 vs. U-verse remote) -
 
Both can control four devices (STB, TV, DVD, Aux) under one activity - Watch TV.

Logitech Harmony Model 300 advantages -
 
Must be able to do something no other remote can do to convince you to spend $30 to buy it so Logitech can make a profit.
 
Monster library of supported devices built on budget for expensive remotes (amazing how libraries grow over the years).

You can predetermine support of make & model via web site (http://myremotesetup.com/EasyZapper/New/Main.asp?WebProcessAction=Start&ReturnUrl=%2FEasyZapper%2F%2E%2FNew%2FProcSpice%2Flanding%2Easp&ClassId=PrSpice%2EProcSpice&RelativePath=ProcSpice%2F).

Since device support is defined in detail, a Logitech customer service rep (CSR) can help with any problems. When anything new comes out it can be added to your existing remote via download.
 
To program - Enter device make model in computer  based wizard. When device is supported, all functions are supported. IR signals can be learned from device remote.
 
IR/function/button  map - You can map any button to any function. You can pick buttons based on your preference, instead of someone else's. Logitech can add any new IR code format to function mapping via download. CSR can download changes that affect only you,
 
Watch TV button - Turns on/off programmed devices. Sets correct input. Ability to sequence devices and introduce delay between devices.
 
Change from Watch TV mode to individual device control with one button push and vice-versa. Same volume/mute buttons will affect different devices (STB, TV, HT) depending on device selected and the one user selected for the Watch TV activity. Note that the U-verse phantom mute can be un-muted with four logical button pushes - device mode, STB, mute, return to watch TV mode.
 
Able to buy more advanced remotes for more money - Each step up adds more devices, more activities(e.g. Watch OTA, Watch DVD, Watch TV with HT sound), more display (LCD screen) of functions & recharge-ablity .

Multiple activities appears to be a concept unique to the Logitech Harmony. It allows the same buttons to be programmed to different sets of inputs/functions/devices based on what the viewer is watching (i.e. an activity). The button map is unique to the activity. It can be as similar or different between activities/devices as you need it to be. Each activity has its own start up sequence to power up the selected devices & set inputs needed for continuity. It is especially valuable for complex setups and/or people with only basic knowledge of the operation of the remote.
 
*****************************************************************************************************

U-verse remote limitations -
 
U-verse  remote is provided free to watch U-verse TV. Support for some functions on some other devices is included so that it can be called "universal". But there is no business driver to spend money to assure full support of all functions on all possible devices .
 
Limited library of supported devices. Vague lists by type/mfgr. No model detail. No definitive/comprehensive list of codes. No "not supported" statement. If support is not accomplished, there is no way to find out if it should be supported until you find that the remote works for you. Since device support is not defined in detail, customer service rep cannot help with problems.
 
To program- Enter an arbitrary code that may be difficult (or impossible) to determine or step through every possible entry using the search method. Possibly finding some partially supported sets along the way.  No IR learning.
 
IR/function/button  map - Button/IR map cannot change (need new physical remote). IR/function map can only change if U-verse globally changes STB software. No ability to provide individual tuning.
 
Watch TV (ATT/power) -  Turns on/off programmed devices. Does not set input. No ability to sequence devices or introduce delay.
 
Default mode of operation is Watch TV (Channel change on STB, Volume on TV, Power up STB/TV). To vary operation requires reprogramming with more arbitrary codes applied to individual functions. No clear distinction between Watch TV and individual device control (i.e. It is difficult to change operation between Watch TV and controlling individual devices by programming with codes.)

To clear phantom mute - att/ok - 955 - att - enter - mute - att/ok - 955 - tv - enter. 12 button pushes, where two are two finger. If you can remember how to do it.
 
Point anywhere remote is the only extra cost upgrade - provides RF (with STB pairing) and learning IR.

*************************************************************************************

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

15 of 24 (241,585 Views)
0
(0)
  • Rate this reply
View profile
May 14, 2013 10:04:32 AM
0
(0)
Teacher

You dont happen to know any additional codes for Bose Cinemate GS II by chance? Nothing seems to work. FINALLY was able to get the Samsung BluRay set up. A code not listed by Uverse. SBR Model BD-D6500 @ code 2483 thanks to a post I came across. 

You dont happen to know any additional codes for Bose Cinemate GS II by chance? Nothing seems to work. FINALLY was able to get the Samsung BluRay set up. A code not listed by Uverse. SBR Model BD-D6500 @ code 2483 thanks to a post I came across. 

Re: Guide on how to Program AT&T Remote Control to your TV

16 of 24 (213,441 Views)
0
(0)
  • Rate this reply
View profile
May 14, 2013 10:20:55 AM
0
(0)
ACE - Master
mstaylor2511 -
Google U-verse remote code for bose & you will get many codes to try. You did see my earlier post that you need to change the volume setting??
mstaylor2511 -
Google U-verse remote code for bose & you will get many codes to try. You did see my earlier post that you need to change the volume setting??
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

17 of 24 (213,436 Views)
0
(0)
  • Rate this reply
View profile
May 15, 2013 4:42:17 AM
0
(0)
Teacher
yup. tried that. even reset the uverse back to factory settings and started over. no go. I did get several codes yesterday from BOSE to try on the BOSE remote to set up the uverse box (mfg. by Cisco). Stop gap measure, I know but worth a try. Thanks
yup. tried that. even reset the uverse back to factory settings and started over. no go. I did get several codes yesterday from BOSE to try on the BOSE remote to set up the uverse box (mfg. by Cisco). Stop gap measure, I know but worth a try. Thanks

Re: Guide on how to Program AT&T Remote Control to your TV

18 of 24 (213,370 Views)
0
(0)
  • Rate this reply
View profile
Jan 1, 2014 12:37:09 PM
0
(0)
Contributor

 

I have not been able to enter any codes for the Samsung HDTV. The S10-S1 always comes back with the invalid response when entering codes. This is a new TV and I had previously entered the codes for a Sharp TV. Do I need to clear those codes before entering a new code or is there something else that I am missing?

 

 

I have not been able to enter any codes for the Samsung HDTV. The S10-S1 always comes back with the invalid response when entering codes. This is a new TV and I had previously entered the codes for a Sharp TV. Do I need to clear those codes before entering a new code or is there something else that I am missing?

 

Re: Guide on how to Program AT&T Remote Control to your TV

19 of 24 (100,653 Views)
0
(0)
  • Rate this reply
View profile
Jan 1, 2014 1:47:29 PM
0
(0)
ACE - Master
hawkmothmvp - You do not need to remove one code to add another. You should not have to, but you could try a factory dfault reset, just to clear the remote.

As the first step - You are doing the TV & OK buttons together?? Some settings use att/OK, but devices use the correct mode button. If you want to use other mode buttons for TV, there is a mode change first.
hawkmothmvp - You do not need to remove one code to add another. You should not have to, but you could try a factory dfault reset, just to clear the remote.

As the first step - You are doing the TV & OK buttons together?? Some settings use att/OK, but devices use the correct mode button. If you want to use other mode buttons for TV, there is a mode change first.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

20 of 24 (100,603 Views)
0
(0)
  • Rate this reply
View profile
Jan 1, 2014 4:56:51 PM
0
(0)
Contributor

I have been pressing the TV & OK buttons. I get the double flash to signify it is in programming mode. It's just when I enter any code, I get the long light signifying that it was an invalid code. I have multiple remotes and they all do the same thing. Are there new codes? Should I get a new remote?

I have been pressing the TV & OK buttons. I get the double flash to signify it is in programming mode. It's just when I enter any code, I get the long light signifying that it was an invalid code. I have multiple remotes and they all do the same thing. Are there new codes? Should I get a new remote?

Re: Guide on how to Program AT&T Remote Control to your TV

21 of 24 (100,443 Views)
0
(0)
  • Rate this reply
View profile
Jan 1, 2014 5:11:00 PM
0
(0)
ACE - Master
hawkmothmvp - There do seem to be different code for the two remotes. Is yours the all black or grey face?? & I will look up the samsung codes on the orig doc for the remote.
hawkmothmvp - There do seem to be different code for the two remotes. Is yours the all black or grey face?? & I will look up the samsung codes on the orig doc for the remote.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

22 of 24 (100,432 Views)
0
(0)
  • Rate this reply
View profile
Jan 2, 2014 6:38:35 AM
0
(0)
Contributor

I have the black remote

I have the black remote

Re: Guide on how to Program AT&T Remote Control to your TV

23 of 24 (100,222 Views)
0
(0)
  • Rate this reply
View profile
Jan 2, 2014 7:08:26 AM
0
(0)
ACE - Master
hawkmothmvp - Samsung codes - 1006 1026 1041 - 43 1046 1047 1049 1081 - 85 1100 1136 - 39 1171 1176 1189 1214 1223 1311 1314 1345 1359 1364 1366 1370 1375 1442 1578

I had a Samsung that I could not find a code for & had to use the search method. If you do not find a setting with the TV off try it with the TV on. Note that the find method uses the enter button instead of the OK button.

Factory reset is att/ok( together) - 900
hawkmothmvp - Samsung codes - 1006 1026 1041 - 43 1046 1047 1049 1081 - 85 1100 1136 - 39 1171 1176 1189 1214 1223 1311 1314 1345 1359 1364 1366 1370 1375 1442 1578

I had a Samsung that I could not find a code for & had to use the search method. If you do not find a setting with the TV off try it with the TV on. Note that the find method uses the enter button instead of the OK button.

Factory reset is att/ok( together) - 900
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Guide on how to Program AT&T Remote Control to your TV

24 of 24 (100,208 Views)
Share this post
Share this post