Ask a question
Search in DIRECTV Forums

DIRECTV Forum

Reply
Posted Mar 3, 2014
5:50:35 AM
View profile
Geni Mini Setup

I have one problem with my setup.

I have the Mini with a HDMI running to one tv. The second tv is setup with the A/V port. I have a RF-Modulator converting to co-axial to the tv. Everything is fine if I leave the first tv that is hooked to the HDMI on. If I turn it off the second tv goes off.

Is this the way I have to run things?

I have one problem with my setup.

I have the Mini with a HDMI running to one tv. The second tv is setup with the A/V port. I have a RF-Modulator converting to co-axial to the tv. Everything is fine if I leave the first tv that is hooked to the HDMI on. If I turn it off the second tv goes off.

Is this the way I have to run things?

Geni Mini Setup

299 views
8 replies
(0) Me too
(0) Me too
Reply
View all replies
(8)
0
(0)
  • Rate this reply
View profile
Mar 3, 2014 6:01:45 AM
0
(0)
Guru

I think you may just be turning the reciever off with the first tv

Just turn the first tv off manually

Or when going to room 2 press on again on the remote if its set to rf mode

I think you may just be turning the reciever off with the first tv

Just turn the first tv off manually

Or when going to room 2 press on again on the remote if its set to rf mode

Re: Geni Mini Setup

2 of 9 (5 Views)
0
(0)
  • Rate this reply
View profile
Mar 3, 2014 6:13:40 AM
0
(0)
Contributor

"Just turn the first tv off manually

Or when going to room 2 press on again on the remote if its set to rf mode"

That doesn't work. After about a minute it turns the second tv off saying that it needs to be changed to a HDMI cable.

"Just turn the first tv off manually

Or when going to room 2 press on again on the remote if its set to rf mode"

That doesn't work. After about a minute it turns the second tv off saying that it needs to be changed to a HDMI cable.

Re: Geni Mini Setup

3 of 9 (5 Views)
0
(0)
  • Rate this reply
View profile
Mar 3, 2014 9:28:21 AM
0
(0)
Employee

Right, when You turn off the HDMI connected TV that breaks down HDCP and as such shutting all outputs down. The fix would be to get an component video switch to connect the main TV with component cables and connect a component to composite adapter inline with your RF modulator. Another alternative is to get an HD receiver that has composite out on board

Right, when You turn off the HDMI connected TV that breaks down HDCP and as such shutting all outputs down. The fix would be to get an component video switch to connect the main TV with component cables and connect a component to composite adapter inline with your RF modulator. Another alternative is to get an HD receiver that has composite out on board

*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: Geni Mini Setup

4 of 9 (5 Views)
0
(0)
  • Rate this reply
View profile
Mar 3, 2014 12:50:27 PM
0
(0)
Expert

A small filler to peds48's excellent response.  All HDMI connections send out a query asking the connected device (the TV) if it's HDCP (copy protection) compliant.  The TV responds yes and the handshake is complete and the signal is transmitted.  When the TV is off, no response thus no transmitted signal.

A small filler to peds48's excellent response.  All HDMI connections send out a query asking the connected device (the TV) if it's HDCP (copy protection) compliant.  The TV responds yes and the handshake is complete and the signal is transmitted.  When the TV is off, no response thus no transmitted signal.

Re: Geni Mini Setup

5 of 9 (5 Views)
0
(0)
  • Rate this reply
View profile
Mar 3, 2014 1:03:57 PM
0
(0)
ACE - Master

You can also solve the problem by getting a POWERED HDMI 2-way splitter that supports HDCP (Monoprice and others). Just connect the HDMI-connected TV to one of the output ports of the splitter. Leave the other empty. When the TV is switched off, the splitter maintains the HDCP compliance and so the receiver thinks the TV is still on.

You can also solve the problem by getting a POWERED HDMI 2-way splitter that supports HDCP (Monoprice and others). Just connect the HDMI-connected TV to one of the output ports of the splitter. Leave the other empty. When the TV is switched off, the splitter maintains the HDCP compliance and so the receiver thinks the TV is still on.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Geni Mini Setup

6 of 9 (5 Views)
0
(0)
  • Rate this reply
View profile
Mar 8, 2014 10:22:41 PM
0
(0)
Mentor

But I have a tv in the basement with component only and it works even if both boxes (one regular mini and one dvr) are off.

But I have a tv in the basement with component only and it works even if both boxes (one regular mini and one dvr) are off.

Re: Geni Mini Setup

7 of 9 (5 Views)
0
(0)
  • Rate this reply
View profile
Mar 9, 2014 8:04:44 AM
0
(0)
Expert

Understand that all of the previous responses you got were in regard to the TV that was connected to the modulator.  The TV's with their own DVR or Mini are not involved in the discussion.

Understand that all of the previous responses you got were in regard to the TV that was connected to the modulator.  The TV's with their own DVR or Mini are not involved in the discussion.

Re: Geni Mini Setup

8 of 9 (5 Views)
0
(0)
  • Rate this reply
View profile
Mar 9, 2014 10:54:19 AM
0
(0)
ACE - Expert

Best to start your own new thread, amarjit.  Your situation sounds totally different than the original poster's.

Best to start your own new thread, amarjit.  Your situation sounds totally different than the original poster's.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Geni Mini Setup

9 of 9 (5 Views)
Share this post
Share this post