Contributor
•
3 Messages
Vizio Soundbar Compatibility with U-Verse Remote Control
I have the Vizio VSB210WS Sound Bar and I was hoping to sync the remotes, so I don't have to use the Vizio remote just for the volume, but I haven't been able to do so.
Has anyone else had success doing this with a Vizio soundbar????
dragunsfyre
Contributor
•
2 Messages
11 years ago
Which Uverse remote do you have? I have the S10-S3 and a Vizio VSB207 SoundBar and I can't get the auto-search to find the code. I've gone through the sequence twice, attempting to assign the SoundBar control to the AUX button. I went through about 200+ clicks of hte Scan/FF key with no success. Anybody else have any tips?
0
0
dragunsfyre
Contributor
•
2 Messages
11 years ago
0
0
aviewer
Expert
•
10.1K Messages
11 years ago
By advice taken do you wean you bought a Harmony. which one did you get? If you did not get one yet I just checked newegg.com & they have model 700 refurb for $55.
0
0
vic100
Contributor
•
2 Messages
11 years ago
Oops! Seems like someone else had already posted the directions!
0
0
bryan.dallas
Contributor
•
1 Message
11 years ago
SUCCESS !!! - Thanks to Livesublime's suggestion, I have a fully functioning U-Verse RF Remote that works with my VIZIO VSB210WS Sound Bar.
IMPORTANT - BE PATIEINT (and persistent) when using the SCAN/FF key to advance through the codes (Step 4 in the Livesublime suggestions) - I pressed the button around 200 times until it found the right code and shut off the power.
Very excited to have one remote that works with all the TV components.
0
0
ECGuy
Contributor
•
1 Message
10 years ago
Thank you so much!! These instructions worked flawlessly for my Sony Sound Bar (and I'm certain it will work with any other Sound Bars).
One quick note: if you happen to pass the code that worked while pressing "SCAN->\FF", I pressed "REW\<-SCAN" to go back a couple of codes and found the one that did work for turning off my sound bar. After which point, you press the "Power" button along with the Volume buttons and "Mute" button to ensure it works well with your sound bar.
I had to press the "SCAN->\FF" for a long while before reaching the proper code for Sony.
Thanks again for posting the solution to my headache of having multiple remotes!
0
0
kressler
Contributor
•
1 Message
10 years ago
When you now start your equipment with the UVerse remote, does it power on the UVerse DVR/receiver, the TV and the sound bar but there is no sound from the TV's speakers but just the sound bar? And the volume buttons on the UVerse remote only control the sound bar volume?
0
0
tim4802
Contributor
•
1 Message
9 years ago
0
0
rutang
Contributor
•
1 Message
9 years ago
I have tried the auto search and manually entering the previous codes but I can't get anything to work. I think my model # is s4251w-b4. can anyone help me?
0
0