Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Aug 29, 2011
8:14:23 PM
View profile
VIP1225 box - recordings gone & remote slow at times

Greetings!

 

We recently got the U-Verse TV reinstated (hiatus of a year); previously used VIP1225 so got another VIP1225 installed. Looks new although don't know if it is a refurbished box or not.

 

Guesing I had about 20 programs recorded (mostly through series recording) in 5 days since installation. Today the recorded program went down to 2 and after a reboot (from menu), it went to zero recordings available Smiley Sad

 

After reading some threads here tonight, I have: (1) depressed reset button of the RG for 15 secs (2) unplugged the power of the sole VIP1225 for 30 secs. Unfortunately neither helped

 

I don't know if this means anything but there is 1 program listed I see the recorded program listing through the web but the actual DVR box UI says there are none.

 

Another peculiar thing I've seen is the random slowdown of menu operations. Some times it wouldn't register traversing of the menu for a good 5 secs and post-reboot still exhibits the same random slowdown/no response.

 

Do I have a bad box and need to have it replaced? Or are there anything else to try?

 

Thank you!

Rob

 

 

Greetings!

 

We recently got the U-Verse TV reinstated (hiatus of a year); previously used VIP1225 so got another VIP1225 installed. Looks new although don't know if it is a refurbished box or not.

 

Guesing I had about 20 programs recorded (mostly through series recording) in 5 days since installation. Today the recorded program went down to 2 and after a reboot (from menu), it went to zero recordings available Smiley Sad

 

After reading some threads here tonight, I have: (1) depressed reset button of the RG for 15 secs (2) unplugged the power of the sole VIP1225 for 30 secs. Unfortunately neither helped

 

I don't know if this means anything but there is 1 program listed I see the recorded program listing through the web but the actual DVR box UI says there are none.

 

Another peculiar thing I've seen is the random slowdown of menu operations. Some times it wouldn't register traversing of the menu for a good 5 secs and post-reboot still exhibits the same random slowdown/no response.

 

Do I have a bad box and need to have it replaced? Or are there anything else to try?

 

Thank you!

Rob

 

 

0
(0)
  • Rate this reply
View profile
Solved
Aug 30, 2011 8:35:01 AM
0
(0)
Professor
Edited by pamelaz on Sep 14, 2011 at 8:41:15 AM

Try this.

 

NOTE: You will lose any and all RECORDINGS using these steps

Follow these steps to test your DVR.

1. Press the down arrow and OK keys at the same time on the front of the receiver as the receiver restarts (during the time that the Link, HD and Record lights are still on) until a gear appears on the screen (approx. 10 seconds).

2. If the Disaster Recovery screen does not appear, repeat the disaster recovery process (Step 1).

3. If the Disaster Recovery screen appears, proceed with the next step. Wait for 45 minutes to 1 hour to complete its rebooting process. Leave your TV on and just wait for the box to reboot.

4. If the rebooting process works normally it will go back to the U-verse shows/programs. If not, you will be seeing a RED X on your tv.

5. That means that the receiver/dvr just failed to reset its configuration.

6. If that happened, please call U-verse Tech Support {Personal content removed for safety} to schedule for a Premise Technician, to replace the DVR.

________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________
Accepted Solution

VIP1225 box - recordings gone & remote slow at times

2,208 views
5 replies
(0) Me too
(0) Me too
Reply
View all replies
(5)
0
(0)
  • Rate this reply
View profile
Aug 29, 2011 8:57:13 PM
0
(0)
Professor
you need to reset the DVR or Set top, not the RG. Unplug the box in question, then while powering back up, it should perform a soft reset, which should work.
________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________
you need to reset the DVR or Set top, not the RG. Unplug the box in question, then while powering back up, it should perform a soft reset, which should work.
________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________

Re: VIP1225 box - recordings gone & remote slow at times

2 of 6 (2,200 Views)
0
(0)
  • Rate this reply
View profile
Aug 30, 2011 8:01:49 AM
0
(0)
Teacher

Yes, I did that too. First was the RG & then the VIP1225.

 

Something dawned on me late last night after I posted the initial inquiry. Does the web-based GUI for managing recordings get realtime info from the DVR as to what it is doing?

 

The reason I ask is because I went back into the web-based GUI and tried to delete the one "phantom" recording that shows on the web-based GUI but not on DVR itself; DVR, even after a soft boot, is still showing "no recordings". To my surprise it didn't let me delete it because it was "supposedly" still recording according to the web-based GUI. I had to first hit the "stop recording" button that the web-based GUI popped up & then it let me delete it. I started wondering about how the website and the DVR communicates as this job that showed up only in the web-based GUI was a recording that started shortly before the DVR lost power mid-last week due to a storm.

 

I'm contemplating if I should register a case with support so that if it is indeed a bad VIP1225 I can get it replaced. Or if it was an isolated case I would like to understand how the data is exhcanged between the website & DVR ...

 

Thank you.

Rob

 

 

 

Yes, I did that too. First was the RG & then the VIP1225.

 

Something dawned on me late last night after I posted the initial inquiry. Does the web-based GUI for managing recordings get realtime info from the DVR as to what it is doing?

 

The reason I ask is because I went back into the web-based GUI and tried to delete the one "phantom" recording that shows on the web-based GUI but not on DVR itself; DVR, even after a soft boot, is still showing "no recordings". To my surprise it didn't let me delete it because it was "supposedly" still recording according to the web-based GUI. I had to first hit the "stop recording" button that the web-based GUI popped up & then it let me delete it. I started wondering about how the website and the DVR communicates as this job that showed up only in the web-based GUI was a recording that started shortly before the DVR lost power mid-last week due to a storm.

 

I'm contemplating if I should register a case with support so that if it is indeed a bad VIP1225 I can get it replaced. Or if it was an isolated case I would like to understand how the data is exhcanged between the website & DVR ...

 

Thank you.

Rob

 

 

 

Re: VIP1225 box - recordings gone & remote slow at times

3 of 6 (2,181 Views)
Highlighted
0
(0)
  • Rate this reply
View profile
Solved
Aug 30, 2011 8:35:01 AM
0
(0)
Professor
Edited by pamelaz on Sep 14, 2011 at 8:41:15 AM

Try this.

 

NOTE: You will lose any and all RECORDINGS using these steps

Follow these steps to test your DVR.

1. Press the down arrow and OK keys at the same time on the front of the receiver as the receiver restarts (during the time that the Link, HD and Record lights are still on) until a gear appears on the screen (approx. 10 seconds).

2. If the Disaster Recovery screen does not appear, repeat the disaster recovery process (Step 1).

3. If the Disaster Recovery screen appears, proceed with the next step. Wait for 45 minutes to 1 hour to complete its rebooting process. Leave your TV on and just wait for the box to reboot.

4. If the rebooting process works normally it will go back to the U-verse shows/programs. If not, you will be seeing a RED X on your tv.

5. That means that the receiver/dvr just failed to reset its configuration.

6. If that happened, please call U-verse Tech Support {Personal content removed for safety} to schedule for a Premise Technician, to replace the DVR.

________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________

Try this.

 

NOTE: You will lose any and all RECORDINGS using these steps

Follow these steps to test your DVR.

1. Press the down arrow and OK keys at the same time on the front of the receiver as the receiver restarts (during the time that the Link, HD and Record lights are still on) until a gear appears on the screen (approx. 10 seconds).

2. If the Disaster Recovery screen does not appear, repeat the disaster recovery process (Step 1).

3. If the Disaster Recovery screen appears, proceed with the next step. Wait for 45 minutes to 1 hour to complete its rebooting process. Leave your TV on and just wait for the box to reboot.

4. If the rebooting process works normally it will go back to the U-verse shows/programs. If not, you will be seeing a RED X on your tv.

5. That means that the receiver/dvr just failed to reset its configuration.

6. If that happened, please call U-verse Tech Support {Personal content removed for safety} to schedule for a Premise Technician, to replace the DVR.

________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________

Re: VIP1225 box - recordings gone & remote slow at times

[ Edited ]
4 of 6 (2,174 Views)
Solution
0
(0)
  • Rate this reply
View profile
Aug 30, 2011 6:28:00 PM
0
(0)
Teacher

Thank you very much! I just performed your instructions & at least I know the DVR itself is okay. It looks like something was really wrong with the disk because before the DR it had no recordings & 40 hrs of free SD space. After the DR it shows 219 hrs of free SD space. Thank you again for the DR instrcutions - very much appreciated.

 

As far as the communications between DVR & website, am I correct in assuming that it is realtime? Also would you know which device overules in case of conflict?

 

Rob

Thank you very much! I just performed your instructions & at least I know the DVR itself is okay. It looks like something was really wrong with the disk because before the DR it had no recordings & 40 hrs of free SD space. After the DR it shows 219 hrs of free SD space. Thank you again for the DR instrcutions - very much appreciated.

 

As far as the communications between DVR & website, am I correct in assuming that it is realtime? Also would you know which device overules in case of conflict?

 

Rob

Re: VIP1225 box - recordings gone & remote slow at times

5 of 6 (2,159 Views)
0
(0)
  • Rate this reply
View profile
Aug 31, 2011 11:21:16 AM
0
(0)
Professor
There can be a slight time lag, but it should not be a long time. I would give it one or two minutes to reflect either on WRA, or on your box.
________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________
There can be a slight time lag, but it should not be a long time. I would give it one or two minutes to reflect either on WRA, or on your box.
________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________

Re: VIP1225 box - recordings gone & remote slow at times

6 of 6 (2,134 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post