Ask a question
Search in U-verse Forums

Questions about your Smartphone data usage? Please join us here for a live “Ask an Expert” event on Wednesday, August 24th from 1-5 pm ET / 10am-2pm PT.

U-verse Forums

Reply
Highlighted
Posted May 14, 2013
8:13:52 PM
View profile
New U-verser with Network Topology Question Concerning Cisco Wireless Receiver Placement

Just got my system set up this weekend and I have the following configuration:

 

i3812V Modem + TV STB + Cisco WAP Receiver

 

The current setup I have that is working is a Netgear DSL+router connected to the i3812v via ethernet and they are both located at the back end of the house. I have the DSL disabled on the Netgear Modem+Router, and the wireless disabled on the i3812v. I have another Netgear N300 in the middle of the house bridged to the Netgear in the back of the house. All our laptops and other wifi devices connect to that N300.

 

My question is whether the Cisco Wireless AP has to be LAN'd to the i3812V or can it also be LAN'd to the N300 in the center of the house. This would give us maximum options of which room to use the wireless tv STB for 2nd viewing options. If so, do I have to change any of the Firewall settings in the i3812V GUI to all the Cisco to talk to the i3812V through the Netgear router I want to LAN it to?

 

Thanks in advance

Just got my system set up this weekend and I have the following configuration:

 

i3812V Modem + TV STB + Cisco WAP Receiver

 

The current setup I have that is working is a Netgear DSL+router connected to the i3812v via ethernet and they are both located at the back end of the house. I have the DSL disabled on the Netgear Modem+Router, and the wireless disabled on the i3812v. I have another Netgear N300 in the middle of the house bridged to the Netgear in the back of the house. All our laptops and other wifi devices connect to that N300.

 

My question is whether the Cisco Wireless AP has to be LAN'd to the i3812V or can it also be LAN'd to the N300 in the center of the house. This would give us maximum options of which room to use the wireless tv STB for 2nd viewing options. If so, do I have to change any of the Firewall settings in the i3812V GUI to all the Cisco to talk to the i3812V through the Netgear router I want to LAN it to?

 

Thanks in advance

0
(0)
  • Rate this reply
View profile
Solved
May 14, 2013 8:18:10 PM
0
(0)
Expert
As far as I know, the Cisco WAP for the wireless STBs must be directly connected to the i3812V. If you connect it to your N300, the resulting multicast traffic will be all over your network, including your wireless access points, and will cause big problems.
Accepted Solution

New U-verser with Network Topology Question Concerning Cisco Wireless Receiver Placement

1,202 views
3 replies
(0) Me too
(0) Me too
Reply
View all replies
(3)
0
(0)
  • Rate this reply
View profile
Solved
May 14, 2013 8:18:10 PM
0
(0)
Expert
As far as I know, the Cisco WAP for the wireless STBs must be directly connected to the i3812V. If you connect it to your N300, the resulting multicast traffic will be all over your network, including your wireless access points, and will cause big problems.
As far as I know, the Cisco WAP for the wireless STBs must be directly connected to the i3812V. If you connect it to your N300, the resulting multicast traffic will be all over your network, including your wireless access points, and will cause big problems.

Re: New U-verser with Network Topology Question Concerning Cisco Wireless Receiver Placement

2 of 4 (1,200 Views)
Solution
0
(0)
  • Rate this reply
View profile
May 15, 2013 2:37:24 AM
0
(0)
Contributor

Thanks for giving information

Thanks for giving information

Re: New U-verser with Network Topology Question Concerning Cisco Wireless Receiver Placement

3 of 4 (1,162 Views)
0
(0)
  • Rate this reply
View profile
May 15, 2013 3:47:11 PM
0
(0)
Voyager

I was afraid that might be the answer. I had tried once, but kept losing tv signal after about 30 seconds to the wifi receiver connected one. I had thought it might be interference caused by the N300 due to proximity to the WAP, but I wasn't sure.

 

Please let me know if anyone find out anything different.

 

Thank you for the prompt response.

I was afraid that might be the answer. I had tried once, but kept losing tv signal after about 30 seconds to the wifi receiver connected one. I had thought it might be interference caused by the N300 due to proximity to the WAP, but I wasn't sure.

 

Please let me know if anyone find out anything different.

 

Thank you for the prompt response.

Re: New U-verser with Network Topology Question Concerning Cisco Wireless Receiver Placement

4 of 4 (1,105 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post