06-05-2012 9:08 AM
My 4G Elevate is not charging when it's on, a PC is connected to it through WiFi and plugged in to either a USB port or to an A/C outlet. This is quite annoying given I cannot keep it charged and essentially have to turn it off in order to do so. Is this normal?
Solved by: Go to Solution.
06-05-2012 10:37 AM
It should charge when it's turned on and plugged in. Does the battery indicator flash USB when plugged into the USB port? When plugged into a wall outlet, are you using the included charger?
Try a different cable.
06-07-2012 10:37 AM
I'm using the cable and charger it came with. I've even used a different cable but still the same result. I do get the USB flashing and from the elevate webpage, it says it's charging but when I look at the display, there is an exclamation point with a bar or two in the battery level indicator.
06-10-2012 12:58 AM
I've noticed teh same thing; my Elevate hotspot is pugged in all the time to a wall outlet with the origial USB cable. The status screen states "Charging", but instead of the percentage increasing, it declines - for example, one minute it says "Charging - 25%" or something like that (on the att.elevate status page), and a few minutes later it will say "Charging - 22%" - and eventually it will go to zero and shut off, at which point it will charge up again.
06-14-2012 9:45 AM
Yes, that's exactly what mine does as well. It's quite frustrating! And it doesn't charge when the exclamation point is displayed in the battery status window but I can't get an explanation of what it's suppose to represent either. Does anyone have a solution to this problem is the product simply defective?
07-11-2012 11:32 AM
I'm having the same problem as well. Only started happening recently. Exclamation point trying to charge. It eventually dies and charges while it's off but that shouldn't happen.
07-11-2012 4:15 PM
Somewhere on the ATT website, it says that the exclamation point ! means that the device is overheating. The Techs do no seem to know that. I was told by another tech that you should not keep the elevate plugged in all the time. Charge it and then unplug. I have also found that if you use the Elevate while it was charging it will overheat and you get the ! and it stops charging. Another tech offerred that pulling data through while charging was too much happening and it overheats. I have seen it happen.
I have started charging it while it is not polling the network. Plug it in and press the button to turn off. It will not turn off completely, but all you see is the charging battery symbol. Does not seem to get as hot as charging when it is polling for a signal.
A tech also said to discharge the battery completely 3 times when you first get it.
I am not sure the techs really know a lot about this device.
07-30-2012 3:48 PM
I am having the same problem.
I have a hard time accepting the device overheats when in use and charging. The battery does not last a long time so charging while in use is a needed feature. I would have expected Sierra to design something a little more user friendly and able to handle a reasonably expected situation.
I can only hope future versions of the LTE hotspots will incorporate the ability to robustly operate and charge simultaneously,
08-01-2012 5:16 PM
I too am having this issue of not able to charge the hotspot while using it powered on and plugged in to AC power charger.
When I bought into this 2 year plan back in November 2011 my hotspot worked fulltime for days plugged into the charger and stayed charged.
I believe ATT purposely disabled this functioning with the latest fireware update my unit received automatically I believe back in March 2012. This is pure hogwash on their part if they are doing this to limit us paid subscribers data usage to save their network bandwidth. I think further investigation needs to be done on this. I believe it is a firmware issue causing our Elevate Hotspots to now all of a sudden not be able to be used for a permanent long term connection to the internet. What the heck did I buy into this plan for? I need it to stay up all day and night and not drain the battery when the USB charging cable is powering it.
ATT please put the firmware back to the way it was. I know my hotspot used to be powered on for days without draining the battery when charger is connected to power it. The old firmware that originally came with it worked better than this new firmware update they forced (sneaked) downloaded on us. Is this a breach of our contract? I want to cancel my service if this cannot be fixed or if they refuse to allow us to use the unit full time without running down the battery and losing connections.
08-02-2012 5:14 PM
I need help getting answers on this issue. It seems that after the last firmware update ATT pushed out to the device, this Elevate hotspot will discharge the battery while it is on and in use even though you have the power charger USB cable connected to keep it charged.
I depend on this connection to stay up and last all day for work and now it only works for about 4 hours and dies requiring you to turn it off in order for it to begin recharging again. What a farce this firmware update is! Before this update, I could use it almost continuously when the charger was plugged in! But they took that away from us now. Are any of you complaining about this to get a fixed firmware? When is a new firmware going to be released? This is terrible service ATT! It's not the way to raise your ratings and customer base. Please fix this issue ASAP or release to us the choice to go back to the older working firmware.
08-03-2012 7:12 AM
I'm experiencing the same problem...thanks for the info posted here!
I believe the "overheating" theory is correct. While experiencing the non-charging problem, I aimed a large fan at the Elevate. After only a couple of minutes, the unit start to charge as expected both via the plug (the charge symbol started to flash) and via USB connection to the computer (the USB symbol flashed in the battery icon).
As others stated, I've only recently experienced this problem...also after the firmware update.
08-06-2012 10:39 AM
I am also getting the same issues since the last firmware update. Is this issue being addressed at all? It's really frustrating and basically makes the hotspot unusable as a business data device.
08-06-2012 12:00 PM
The exclamation mark you're seeing is indeed a temperature warning and your Elevate will stop charging until the temperature reaches normal levels.
Here are a few tips to avoid this issue:
08-06-2012 2:51 PM
Same problem for me. I work from home and recently changed to sierra elevate from DSL. I can almost make it through 8 hours by having two batteries fully charged in the morning and swapping out mid day. Unacceptable for me.