Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Jun 1, 2010
4:40:11 PM
View profile
Help Installing VCR, stereo receiver, and DVD

Hello everyone!  We had the AT&T tech out here on April 26 to install our U-Verse system.  However, none of our components (i.e. VCR, DVD player, stereo receiver, or stereo speakers) were hooked up yet (they weren't unpacked).  He just installed the AT&T receiver to our HDTV.  We have a brand new Phillips 42" HDTV.  The VCR is a late 90's Sony SLV-N71.  The DVD player is a 2005 Sony DVPN5V57P.  I have these hooked up to a Technics SA-EX300 receiver from the mid-90's powering some 901 Bose speakers which have their own equalizer.

 

As you can guess, there are many wires everywhere.  On top of that we have an early 90's Fisher cassette player/recorder.  They all worked fine when we had Comcast basic service (no set up box). 

 

My boyfriend is losing his mind and I'm losing my patience because he cannot get this setup.  He bought one HDMI calbe and tried to connect it from the TV to the AT&T receiver and he put the source for the TV to HDMI1 and the TV flashes the picture for a split second and then, shows what souce it's on.  He tried it on HDMI 2, then 3 and it does the same thing. 

 

He cannot get the VCR and DVD connected either.  Can someone provide a step by step connection guide since AT&T is worthless and they want to send someone out here for $300 to hook it all up.  I would really appreciate your help.  Oh, and the book provided by AT&T doesn't help.  Obviously, otherwise we wouldn't have a bunch of people coming on this message board asking for assistance.

 

Thanks!

 

Joanne

Hello everyone!  We had the AT&T tech out here on April 26 to install our U-Verse system.  However, none of our components (i.e. VCR, DVD player, stereo receiver, or stereo speakers) were hooked up yet (they weren't unpacked).  He just installed the AT&T receiver to our HDTV.  We have a brand new Phillips 42" HDTV.  The VCR is a late 90's Sony SLV-N71.  The DVD player is a 2005 Sony DVPN5V57P.  I have these hooked up to a Technics SA-EX300 receiver from the mid-90's powering some 901 Bose speakers which have their own equalizer.

 

As you can guess, there are many wires everywhere.  On top of that we have an early 90's Fisher cassette player/recorder.  They all worked fine when we had Comcast basic service (no set up box). 

 

My boyfriend is losing his mind and I'm losing my patience because he cannot get this setup.  He bought one HDMI calbe and tried to connect it from the TV to the AT&T receiver and he put the source for the TV to HDMI1 and the TV flashes the picture for a split second and then, shows what souce it's on.  He tried it on HDMI 2, then 3 and it does the same thing. 

 

He cannot get the VCR and DVD connected either.  Can someone provide a step by step connection guide since AT&T is worthless and they want to send someone out here for $300 to hook it all up.  I would really appreciate your help.  Oh, and the book provided by AT&T doesn't help.  Obviously, otherwise we wouldn't have a bunch of people coming on this message board asking for assistance.

 

Thanks!

 

Joanne

Accepted Solution

Help Installing VCR, stereo receiver, and DVD

13,415 views
54 replies
(1) Me too
(1) Me too
Reply
View all replies
(54)
0
(0)
  • Rate this reply
View profile
Dec 27, 2011 8:35:33 PM
0
(0)
Expert

Yay, SJ!  How you can do all that in your head with no equipment in front of you, just amazes me!!!

Yay, SJ!  How you can do all that in your head with no equipment in front of you, just amazes me!!!

Re: Help Installing VCR, stereo receiver, and DVD

31 of 55 (2,004 Views)
Highlighted
0
(0)
  • Rate this reply
View profile
Dec 27, 2011 8:40:37 PM
0
(0)
Expert

spd2demun wrote:

Yay, SJ!  How you can do all that in your head with no equipment in front of you, just amazes me!!!


 

User manuals downloadable in PDF format.  Greatest thing since sliced bread. Smiley Wink Smiley Very Happy

 

 


spd2demun wrote:

Yay, SJ!  How you can do all that in your head with no equipment in front of you, just amazes me!!!


 

User manuals downloadable in PDF format.  Greatest thing since sliced bread. Smiley Wink Smiley Very Happy

 

 

Re: Help Installing VCR, stereo receiver, and DVD

32 of 55 (2,002 Views)
0
(0)
  • Rate this reply
View profile
Dec 27, 2011 8:41:33 PM
0
(0)
Expert

Still...you make it sound easier than it is. Smiley Wink

Still...you make it sound easier than it is. Smiley Wink

Re: Help Installing VCR, stereo receiver, and DVD

33 of 55 (2,000 Views)
0
(0)
  • Rate this reply
View profile
Dec 28, 2011 3:15:54 AM
0
(0)
Teacher

I'm utterly amazed at how you can do this as well.  I know you are looking at the manuals, but how to make sense of some of it?  Are you an audio guru? 

 

My boyfriend read your instructions and said, "Ahhhh, now it makes sense."  The only question he had was about his equalizer for the Bose speakers.  He said that they have to have the equalizer.  But, he'll try your connections and see what happens.

I'm utterly amazed at how you can do this as well.  I know you are looking at the manuals, but how to make sense of some of it?  Are you an audio guru? 

 

My boyfriend read your instructions and said, "Ahhhh, now it makes sense."  The only question he had was about his equalizer for the Bose speakers.  He said that they have to have the equalizer.  But, he'll try your connections and see what happens.

Re: Help Installing VCR, stereo receiver, and DVD

34 of 55 (1,995 Views)
0
(0)
  • Rate this reply
View profile
Dec 28, 2011 6:21:18 AM
0
(0)
Expert

The Bose 901s (like any speakers) have a non-linear frequency and phase response.  The equalizer that they come with is designed to compensate for the non-linearities so that the speakers end up producing a nice flat frequency response.  The equalizer also adds some punch to the low end.

In your setup, the Onkyo's Audyssey 2EQ will perform the same function by compensating for the speaker non-linearities and will compensate for the room acoustics as well.  After that if you want to add some low end, you can do that with the audio adjustments on the Onkyo or through one of the listening modes.

 

These newer receivers that have this calibrated microphone automatic equalization are incredible.  My Pioneer VSX-1018 has this same feature (they call it something different but it does the same thing).  The equalization is so good that it has literally devalued speakers as an item category.  With the computer-perfect equalization, you don't need $3000 speakers any more for audiophile quality, you can make a $400 set sound identical.

 

Audio guru?  I dunno.  Audio snob?  Probably. Smiley Very Happy  I've spoiled myself by having a finely-tuned 5.1 system in my house for years as well as an ISF-calibrated HD TV, etc.  So I'm probably also a video snob, computer snob, coffee snob, ... the list goes on.  Just kinda snobby all the way around. Smiley Wink Smiley Very Happy

 

The Bose 901s (like any speakers) have a non-linear frequency and phase response.  The equalizer that they come with is designed to compensate for the non-linearities so that the speakers end up producing a nice flat frequency response.  The equalizer also adds some punch to the low end.

In your setup, the Onkyo's Audyssey 2EQ will perform the same function by compensating for the speaker non-linearities and will compensate for the room acoustics as well.  After that if you want to add some low end, you can do that with the audio adjustments on the Onkyo or through one of the listening modes.

 

These newer receivers that have this calibrated microphone automatic equalization are incredible.  My Pioneer VSX-1018 has this same feature (they call it something different but it does the same thing).  The equalization is so good that it has literally devalued speakers as an item category.  With the computer-perfect equalization, you don't need $3000 speakers any more for audiophile quality, you can make a $400 set sound identical.

 

Audio guru?  I dunno.  Audio snob?  Probably. Smiley Very Happy  I've spoiled myself by having a finely-tuned 5.1 system in my house for years as well as an ISF-calibrated HD TV, etc.  So I'm probably also a video snob, computer snob, coffee snob, ... the list goes on.  Just kinda snobby all the way around. Smiley Wink Smiley Very Happy

 

Re: Help Installing VCR, stereo receiver, and DVD

35 of 55 (1,988 Views)
0
(0)
  • Rate this reply
View profile
Jan 1, 2012 8:45:31 AM
0
(0)
Teacher

Well, he was able to get everything connected.  VCR does not display anything on the screen, but we get sound.  Same with the DVD player.  Also, the DVD player doesn't have a progressive/normal slide switch on it.  He had to put it on the other tv and go to the menu in order to change it to Progressive.  We only get sound, no picture.  He's messing with the connections now.

 

He's a little disappointed in this receiver because it seems to only work well with "newer" components like the CD player.  The tape deck works, but you have to crank the volume higher than normal in order to hear the tape.  I guess when you get an HDTV and want to connect everything to the receiver, you also have to buy all new components too!

 

My phonograph won't connect unless we purchase some kind of additional module to plug into it.  I'm sure they don't make HDMI tape decks or phonographs, do they?  Smiley LOL

 

Here's another problem.  We setup the TV according to the instructions from SomeJoe and the picture isn't being displayed full screen.  We have to go to Zoom and put it on Stretch.  But, then the words at the bottom (i.e. show description, time) are getting cut off.  What do we need to change?  Thank you!

Well, he was able to get everything connected.  VCR does not display anything on the screen, but we get sound.  Same with the DVD player.  Also, the DVD player doesn't have a progressive/normal slide switch on it.  He had to put it on the other tv and go to the menu in order to change it to Progressive.  We only get sound, no picture.  He's messing with the connections now.

 

He's a little disappointed in this receiver because it seems to only work well with "newer" components like the CD player.  The tape deck works, but you have to crank the volume higher than normal in order to hear the tape.  I guess when you get an HDTV and want to connect everything to the receiver, you also have to buy all new components too!

 

My phonograph won't connect unless we purchase some kind of additional module to plug into it.  I'm sure they don't make HDMI tape decks or phonographs, do they?  Smiley LOL

 

Here's another problem.  We setup the TV according to the instructions from SomeJoe and the picture isn't being displayed full screen.  We have to go to Zoom and put it on Stretch.  But, then the words at the bottom (i.e. show description, time) are getting cut off.  What do we need to change?  Thank you!

Re: Help Installing VCR, stereo receiver, and DVD

36 of 55 (1,960 Views)
0
(0)
  • Rate this reply
View profile
Jan 1, 2012 10:12:25 AM
0
(0)
Expert
I don't think you've gone through all of my settings yet. Please completely go through all of the settings I noted above on all of the components (especially the Onkyo and the U-Verse receiver).
I don't think you've gone through all of my settings yet. Please completely go through all of the settings I noted above on all of the components (especially the Onkyo and the U-Verse receiver).

Re: Help Installing VCR, stereo receiver, and DVD

37 of 55 (1,954 Views)
0
(0)
  • Rate this reply
View profile
Jan 1, 2012 11:05:03 AM
0
(0)
Teacher

He reset the entire receiver and is going to start again from the beginning.  We ordered a Blu Ray DVD player and HDMI cable for it. 

 

Right now we have another problem and he's dealing with that.  Then, he will go back to the TV and go through your steps again.  Thanks again!

He reset the entire receiver and is going to start again from the beginning.  We ordered a Blu Ray DVD player and HDMI cable for it. 

 

Right now we have another problem and he's dealing with that.  Then, he will go back to the TV and go through your steps again.  Thanks again!

Re: Help Installing VCR, stereo receiver, and DVD

38 of 55 (1,948 Views)
0
(0)
  • Rate this reply
View profile
Jan 14, 2012 9:39:14 AM
0
(0)
Teacher

We received the Blu Ray DVD player yesterday.  Boyfriend has everything hooked up, but cannot get the Blu Ray player to work.  SomeJoe, I'm not sure if there are other settings on the receiver that he has to do?  He's not getting a picture in order to do the setup screen that the Blu Ray player says should automatically come up when you turn on the tv. 

 

Also, it seems like the volume has to be turned up so high in order to hear the tv program.  Are there adjustments we can do on the A/V receiver to fix this issue?  It wasn't like this before when he inititially hooked everything up.

 

Here's another issue I have.  You said to turn off the speakers to the TV.  Is there any way that we can still have the TV speakers on?  During the setup and following your instructions, he turned off the tv speakers.  But, if you try to turn them on now, you can't.  I'd like to have the option of watching TV without the receiver on and also having the TV speakers on with the stereo speakers.

 

Thanks for all of your help!  I'm sorry that my boyfriend is so audio/video challenged.  Sometimes I wonder if I should have just did all of the work on hooking this stuff up!  I'm more technologically inclined, I'm discovering, than he is.

We received the Blu Ray DVD player yesterday.  Boyfriend has everything hooked up, but cannot get the Blu Ray player to work.  SomeJoe, I'm not sure if there are other settings on the receiver that he has to do?  He's not getting a picture in order to do the setup screen that the Blu Ray player says should automatically come up when you turn on the tv. 

 

Also, it seems like the volume has to be turned up so high in order to hear the tv program.  Are there adjustments we can do on the A/V receiver to fix this issue?  It wasn't like this before when he inititially hooked everything up.

 

Here's another issue I have.  You said to turn off the speakers to the TV.  Is there any way that we can still have the TV speakers on?  During the setup and following your instructions, he turned off the tv speakers.  But, if you try to turn them on now, you can't.  I'd like to have the option of watching TV without the receiver on and also having the TV speakers on with the stereo speakers.

 

Thanks for all of your help!  I'm sorry that my boyfriend is so audio/video challenged.  Sometimes I wonder if I should have just did all of the work on hooking this stuff up!  I'm more technologically inclined, I'm discovering, than he is.

Re: Help Installing VCR, stereo receiver, and DVD

39 of 55 (1,916 Views)
0
(0)
  • Rate this reply
View profile
Jan 14, 2012 4:34:48 PM
0
(0)
Expert
Unfortunately, I only have the user manuals of the equipment that you posted that you have to go by. At this point, because you're still having problems configuring things, it's not really possible for me to do anything else without putting hands on the equipment, which is impractical.

The best bet for you at this point is to have someone who is local to you who specializes in A/V setups to come to your home and get everything hooked up and working. I hesitate to recommend any of the consumer services like Geek Squad from Best Buy, because they sometimes have people who really don't know what they're doing.

I would recommend you ask at the location where you bought the Onkyo Receiver for a recommendation as to who to go to.
Unfortunately, I only have the user manuals of the equipment that you posted that you have to go by. At this point, because you're still having problems configuring things, it's not really possible for me to do anything else without putting hands on the equipment, which is impractical.

The best bet for you at this point is to have someone who is local to you who specializes in A/V setups to come to your home and get everything hooked up and working. I hesitate to recommend any of the consumer services like Geek Squad from Best Buy, because they sometimes have people who really don't know what they're doing.

I would recommend you ask at the location where you bought the Onkyo Receiver for a recommendation as to who to go to.

Re: Help Installing VCR, stereo receiver, and DVD

40 of 55 (1,911 Views)
0
(0)
  • Rate this reply
View profile
Jan 14, 2012 4:37:57 PM
0
(0)
ACE - Expert

To add to what SJ said, try a high end stereo store for help. 

To add to what SJ said, try a high end stereo store for help. 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Help Installing VCR, stereo receiver, and DVD

41 of 55 (1,966 Views)
0
(0)
  • Rate this reply
View profile
Jan 15, 2012 7:06:13 AM
0
(0)
Teacher

No need for the professional installers. 

 

He was able to get it all working using Some Joe's instructions.  Since we purchased a new Blu Ray DVD player, he had to modify the instructions from Joe.  Now he's going to reconfigure the speakers because the sound is strange with the one center speaker that we have (however, we have no subwoofer or surround sound system).  The voices are coming out of that center speaker while the background noise/music, etc. is coming out of the two Bose speakers.  He's going to disconnect the center speaker and reconfigure the Bose speakers. 

 

Thanks to everyone here for all of your help.  Some Joe, if there was a way to get you out here to help set everything up, you can bet your hat that I would pay you to do it!

No need for the professional installers. 

 

He was able to get it all working using Some Joe's instructions.  Since we purchased a new Blu Ray DVD player, he had to modify the instructions from Joe.  Now he's going to reconfigure the speakers because the sound is strange with the one center speaker that we have (however, we have no subwoofer or surround sound system).  The voices are coming out of that center speaker while the background noise/music, etc. is coming out of the two Bose speakers.  He's going to disconnect the center speaker and reconfigure the Bose speakers. 

 

Thanks to everyone here for all of your help.  Some Joe, if there was a way to get you out here to help set everything up, you can bet your hat that I would pay you to do it!

Re: Help Installing VCR, stereo receiver, and DVD

42 of 55 (1,960 Views)
0
(0)
  • Rate this reply
View profile
Jan 15, 2012 8:43:27 AM
0
(0)
Expert

Sweet! Smiley Happy  Glad that you did finally get everything working!

 

The dialogue coming out of the center speaker is normal -- this is the way that 5.1 audio is supposed to work.  It centralizes the dialogue right near the screen so that background sound effects, music, etc. take advantage of the stereo effects of the front left/front right speaker placement.

 

I would advise not removing the center speaker since it is designed to work that way, especially since you now have a Blu-Ray player which will have extremely good audio on most discs.

 

Also, don't test the audio using a U-Verse SD channel, since those are only 2-channel audio.  Test with a 5.1 Blu-Ray disc or at minimum, a U-Verse HD channel that has 5.1 audio.  Those will illustrate how the system is processing sound.

 

Sweet! Smiley Happy  Glad that you did finally get everything working!

 

The dialogue coming out of the center speaker is normal -- this is the way that 5.1 audio is supposed to work.  It centralizes the dialogue right near the screen so that background sound effects, music, etc. take advantage of the stereo effects of the front left/front right speaker placement.

 

I would advise not removing the center speaker since it is designed to work that way, especially since you now have a Blu-Ray player which will have extremely good audio on most discs.

 

Also, don't test the audio using a U-Verse SD channel, since those are only 2-channel audio.  Test with a 5.1 Blu-Ray disc or at minimum, a U-Verse HD channel that has 5.1 audio.  Those will illustrate how the system is processing sound.

 

Re: Help Installing VCR, stereo receiver, and DVD

43 of 55 (1,954 Views)
0
(0)
  • Rate this reply
View profile
Jan 15, 2012 9:33:37 AM
0
(0)
Teacher
Edited by Taylarie on Jan 15, 2012 at 6:19:05 PM

He's already in the process of changing it and removing the center speaker.  I guess we shall see how it sounds.  Yeah, I know that's how it's supposed to work with the center speaker as my boyfriend said the same thing as you.  But, it bothers me and hurts my right ear.  I also cannot understand what the people are saying that well when it's coming out of the center speaker. 

 

Maybe my ears are strange or {Inappropriate content removed}, but I also have problems with surround sound and I cannot stand how the sound is in a movie theatre when it's coming at all different directions.  I can't stand surround sound!!!  I know, I'm weird.  LOL

 

He's going to kill me if I tell him to change it back with the center speaker.  He's doing the setup with the microphone thing that you put on a tripod in the center of the room right now. 

He's already in the process of changing it and removing the center speaker.  I guess we shall see how it sounds.  Yeah, I know that's how it's supposed to work with the center speaker as my boyfriend said the same thing as you.  But, it bothers me and hurts my right ear.  I also cannot understand what the people are saying that well when it's coming out of the center speaker. 

 

Maybe my ears are strange or {Inappropriate content removed}, but I also have problems with surround sound and I cannot stand how the sound is in a movie theatre when it's coming at all different directions.  I can't stand surround sound!!!  I know, I'm weird.  LOL

 

He's going to kill me if I tell him to change it back with the center speaker.  He's doing the setup with the microphone thing that you put on a tripod in the center of the room right now. 

Re: Help Installing VCR, stereo receiver, and DVD

[ Edited ]
44 of 55 (1,950 Views)
0
(0)
  • Rate this reply
View profile
Jan 28, 2012 6:25:19 AM
0
(0)
Teacher

Update.  We bought a 7.1 surround sound system by Onyko and my boyfriend will be hooking the speakers up today or tomorrow.  He and I agreed that it would be better to have this receiver work at what it was intended to do and that is to provide a home theater experience.  I can't wait to see how it sounds!

Update.  We bought a 7.1 surround sound system by Onyko and my boyfriend will be hooking the speakers up today or tomorrow.  He and I agreed that it would be better to have this receiver work at what it was intended to do and that is to provide a home theater experience.  I can't wait to see how it sounds!

Re: Help Installing VCR, stereo receiver, and DVD

45 of 55 (1,920 Views)
0
(0)
  • Rate this reply
View profile
Jan 28, 2012 6:50:18 AM
0
(0)
Guru

I have an Onkyo receiver with 7.1 feeding 7 Bose double cubes.  I pieced this together so it has 3 Bose Accoustimas modules and a Klipse subwoofer.  I used HDMI from the DVR to the tv and optical from the DVR to the receiver.  I have HDMI from the receiver to tv.  I also have a blu-ray DVD with HDMI to the receiver.  I have a Roku with HDMI to the receiver.  This way, I can watch tv without the sound system and use the sound system for movies and sports.  I always use the sound system with the DVD and Roku.

I have an Onkyo receiver with 7.1 feeding 7 Bose double cubes.  I pieced this together so it has 3 Bose Accoustimas modules and a Klipse subwoofer.  I used HDMI from the DVR to the tv and optical from the DVR to the receiver.  I have HDMI from the receiver to tv.  I also have a blu-ray DVD with HDMI to the receiver.  I have a Roku with HDMI to the receiver.  This way, I can watch tv without the sound system and use the sound system for movies and sports.  I always use the sound system with the DVD and Roku.

Re: Help Installing VCR, stereo receiver, and DVD

46 of 55 (1,916 Views)
0
(0)
  • Rate this reply
View profile
Jan 28, 2012 3:29:12 PM
0
(0)
Teacher

I'm trying to find out how we can watch the tv with just the tv speakers without turning the entire entertainment system on.  We have the tv with HDMI going to the receiver too along with the AT&T box.

I'm trying to find out how we can watch the tv with just the tv speakers without turning the entire entertainment system on.  We have the tv with HDMI going to the receiver too along with the AT&T box.

Re: Help Installing VCR, stereo receiver, and DVD

47 of 55 (1,904 Views)
0
(0)
  • Rate this reply
View profile
Jan 28, 2012 3:58:31 PM
0
(0)
ACE - Expert

flexy633 wrote:

I'm trying to find out how we can watch the tv with just the tv speakers without turning the entire entertainment system on.  We have the tv with HDMI going to the receiver too along with the AT&T box.



You can use one of the other outputs from the stb, like the composite, svhs, coax, or component connections.  And connect them to the corresponding inputs on your tv.  You will also need to connect the red and white audio outputs to the tv from the stb if you use any outputs other than the coax one.  Then you will be able to listen to the speakers in your tv.


flexy633 wrote:

I'm trying to find out how we can watch the tv with just the tv speakers without turning the entire entertainment system on.  We have the tv with HDMI going to the receiver too along with the AT&T box.



You can use one of the other outputs from the stb, like the composite, svhs, coax, or component connections.  And connect them to the corresponding inputs on your tv.  You will also need to connect the red and white audio outputs to the tv from the stb if you use any outputs other than the coax one.  Then you will be able to listen to the speakers in your tv.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Help Installing VCR, stereo receiver, and DVD

48 of 55 (1,902 Views)
0
(0)
  • Rate this reply
View profile
Jan 28, 2012 4:37:13 PM
0
(0)
Guru

Read my post above your's.


flexy633 wrote:

I'm trying to find out how we can watch the tv with just the tv speakers without turning the entire entertainment system on.  We have the tv with HDMI going to the receiver too along with the AT&T box.


 

Read my post above your's.


flexy633 wrote:

I'm trying to find out how we can watch the tv with just the tv speakers without turning the entire entertainment system on.  We have the tv with HDMI going to the receiver too along with the AT&T box.


 

Re: Help Installing VCR, stereo receiver, and DVD

49 of 55 (1,896 Views)
0
(0)
  • Rate this reply
View profile
Oct 24, 2012 9:42:52 AM
0
(0)
Voyager

Going crazy here!!! Not tech savy at all!  Here is what I have:

 

1) Emerson DVD player w/video cassette recorder (EWD 2203);

2) RCA Audio/Video Receiver (STAV - 3970); and

3) Sanyo HDTV LCD (DP 32640).  These are the components of my home entertainment center with speakers in the ceiling and one center speaker on top of the home entertainment cabinet.

 

Had these hooked up prior to getting the Sanyo HDTV and installing U-Verse.  They weren't reattached by the technician and I need step by step instructions if I am going to get them re-installed correctly.  Your assistance would be sincerely appreciated!!!  Thank you so much!!!

 

Sincerely, Linda

Going crazy here!!! Not tech savy at all!  Here is what I have:

 

1) Emerson DVD player w/video cassette recorder (EWD 2203);

2) RCA Audio/Video Receiver (STAV - 3970); and

3) Sanyo HDTV LCD (DP 32640).  These are the components of my home entertainment center with speakers in the ceiling and one center speaker on top of the home entertainment cabinet.

 

Had these hooked up prior to getting the Sanyo HDTV and installing U-Verse.  They weren't reattached by the technician and I need step by step instructions if I am going to get them re-installed correctly.  Your assistance would be sincerely appreciated!!!  Thank you so much!!!

 

Sincerely, Linda

Re: Help Installing DVD and stereo receiver

50 of 55 (1,651 Views)
0
(0)
  • Rate this reply
View profile
Oct 24, 2012 9:55:47 AM
0
(0)
ACE - Expert
lindaw76107- There are multiple ways to connect based on device capabilities and how you want to use them.

Best thing is to connect U-verse STB direct to TV via HDMI for HD.

To watch DVDs connect that to another input on the TV.

If you want to record to the VCR connect yellow/red/white from the STB to the VCR,

To get sound to the receiver connect red/white from the STB to the receiver. Same for DVD player.

This selects viewing on the TV. Mute TV for receiver sound.

You can record what you watch on u-verse on the VCR.
lindaw76107- There are multiple ways to connect based on device capabilities and how you want to use them.

Best thing is to connect U-verse STB direct to TV via HDMI for HD.

To watch DVDs connect that to another input on the TV.

If you want to record to the VCR connect yellow/red/white from the STB to the VCR,

To get sound to the receiver connect red/white from the STB to the receiver. Same for DVD player.

This selects viewing on the TV. Mute TV for receiver sound.

You can record what you watch on u-verse on the VCR.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Help Installing DVD and stereo receiver

51 of 55 (1,651 Views)
0
(0)
  • Rate this reply
View profile
Oct 24, 2012 1:13:03 PM
0
(0)
ACE - Professor

lindaw76107 wrote:

Going crazy here!!! Not tech savy at all!  Here is what I have:

 

1) Emerson DVD player w/video cassette recorder (EWD 2203);

2) RCA Audio/Video Receiver (STAV - 3970); and

3) Sanyo HDTV LCD (DP 32640).  These are the components of my home entertainment center with speakers in the ceiling and one center speaker on top of the home entertainment cabinet.

 

Had these hooked up prior to getting the Sanyo HDTV and installing U-Verse.  They weren't reattached by the technician and I need step by step instructions if I am going to get them re-installed correctly.  Your assistance would be sincerely appreciated!!!  Thank you so much!!!

 

Sincerely, Linda


Here's how I would connect your system to everything:

Uverse STB to TV Via HDMI

Uverse STB Audio to Sound System via Optical (back side the connection on the back of the STB and sound system that glows red)

DVD player to TV via Component video and Composite audio (Red/Blue/Green/Red/White RCA cables)

DVD Player to Sound System via Coax Audio Out (a single RCA cable)

VCR to Sound system via composite (red/white yellow) Connect it to the VCR in on the back side of the sound system

Sound system to TV via composite (red/white/yellow) connect to the VCR out on the back side of the sound system

 

I know it looks and sounds complicated but in my opinion, this should give you the best avaliable picture quality and sound with your equipment and give you the ability to listen/watch tv or movies with and without the sound system on.

-------

Resident Xbox ACE. Ask me almost anything about Xbox on U-Verse.

Xbox Gamertag: americangame
PSN: americangame
Steam:americangame
When friending me mention that you found me on the AT&T forums.

lindaw76107 wrote:

Going crazy here!!! Not tech savy at all!  Here is what I have:

 

1) Emerson DVD player w/video cassette recorder (EWD 2203);

2) RCA Audio/Video Receiver (STAV - 3970); and

3) Sanyo HDTV LCD (DP 32640).  These are the components of my home entertainment center with speakers in the ceiling and one center speaker on top of the home entertainment cabinet.

 

Had these hooked up prior to getting the Sanyo HDTV and installing U-Verse.  They weren't reattached by the technician and I need step by step instructions if I am going to get them re-installed correctly.  Your assistance would be sincerely appreciated!!!  Thank you so much!!!

 

Sincerely, Linda


Here's how I would connect your system to everything:

Uverse STB to TV Via HDMI

Uverse STB Audio to Sound System via Optical (back side the connection on the back of the STB and sound system that glows red)

DVD player to TV via Component video and Composite audio (Red/Blue/Green/Red/White RCA cables)

DVD Player to Sound System via Coax Audio Out (a single RCA cable)

VCR to Sound system via composite (red/white yellow) Connect it to the VCR in on the back side of the sound system

Sound system to TV via composite (red/white/yellow) connect to the VCR out on the back side of the sound system

 

I know it looks and sounds complicated but in my opinion, this should give you the best avaliable picture quality and sound with your equipment and give you the ability to listen/watch tv or movies with and without the sound system on.

-------

Resident Xbox ACE. Ask me almost anything about Xbox on U-Verse.

Xbox Gamertag: americangame
PSN: americangame
Steam:americangame
When friending me mention that you found me on the AT&T forums.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Help Installing DVD and stereo receiver

52 of 55 (1,632 Views)
0
(0)
  • Rate this reply
View profile
Oct 24, 2012 1:19:36 PM
0
(0)
Voyager

Like I said, I am NOT tech savvy, but your instructions are a little more clear than the previous responder.  I certainly do appreciate everyone's response to a tech dummie like me, and I am fixing to give it a try.  I will let you know how it goes!!   TYVM

Like I said, I am NOT tech savvy, but your instructions are a little more clear than the previous responder.  I certainly do appreciate everyone's response to a tech dummie like me, and I am fixing to give it a try.  I will let you know how it goes!!   TYVM

Re: Help Installing DVD and stereo receiver

53 of 55 (1,626 Views)
0
(0)
  • Rate this reply
View profile
Oct 25, 2012 1:10:46 PM
0
(0)
ACE - Professor

lindaw76107 wrote:

Like I said, I am NOT tech savvy, but your instructions are a little more clear than the previous responder.  I certainly do appreciate everyone's response to a tech dummie like me, and I am fixing to give it a try.  I will let you know how it goes!!   TYVM


Not a problem. Just another suggestion, get a Harmony remote.  These remotes are simple to setup on your computer and let you 1-button start everything to watching (turns on TV, Sounds system and sets it so that the TV is displayed and that the volume on the sound system is controlled by the same remote)

-------

Resident Xbox ACE. Ask me almost anything about Xbox on U-Verse.

Xbox Gamertag: americangame
PSN: americangame
Steam:americangame
When friending me mention that you found me on the AT&T forums.

lindaw76107 wrote:

Like I said, I am NOT tech savvy, but your instructions are a little more clear than the previous responder.  I certainly do appreciate everyone's response to a tech dummie like me, and I am fixing to give it a try.  I will let you know how it goes!!   TYVM


Not a problem. Just another suggestion, get a Harmony remote.  These remotes are simple to setup on your computer and let you 1-button start everything to watching (turns on TV, Sounds system and sets it so that the TV is displayed and that the volume on the sound system is controlled by the same remote)

-------

Resident Xbox ACE. Ask me almost anything about Xbox on U-Verse.

Xbox Gamertag: americangame
PSN: americangame
Steam:americangame
When friending me mention that you found me on the AT&T forums.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Help Installing DVD and stereo receiver

54 of 55 (1,591 Views)
0
(0)
  • Rate this reply
View profile
Apr 20, 2014 9:01:01 PM
0
(0)
Teacher

flexy633_1 wrote:

Hello everyone!  We had the AT&T tech out here on April 26 to install our U-Verse system.  However, none of our components (i.e. VCR, DVD player, stereo receiver, or stereo speakers) were hooked up yet (they weren't unpacked).  He just installed the AT&T receiver to our HDTV.  We have a brand new Phillips 42" HDTV.  The VCR is a late 90's Sony SLV-N71.  The DVD player is a 2005 Sony DVPN5V57P.  I have these hooked up to a Technics SA-EX300 receiver from the mid-90's powering some 901 Bose speakers which have their own equalizer.

 

As you can guess, there are many wires everywhere.  On top of that we have an early 90's Fisher cassette player/recorder.  They all worked fine when we had Comcast basic service (no set up box). 

 

My boyfriend is losing his mind and I'm losing my patience because he cannot get this setup.  He bought one HDMI calbe and tried to connect it from the TV to the AT&T receiver and he put the source for the TV to HDMI1 and the TV flashes the picture for a split second and then, shows what souce it's on.  He tried it on HDMI 2, then 3 and it does the same thing. 

 

He cannot get the VCR and DVD connected either.  Can someone provide a step by step connection guide since AT&T is worthless and they want to send someone out here for $300 to hook it all up.  I would really appreciate your help.  Oh, and the book provided by AT&T doesn't help.  Obviously, otherwise we wouldn't have a bunch of people coming on this message board asking for assistance.

 

Thanks!

 

Joanne


Yes, they did the exact same thing to me.  I called customer service~~this happened over 2 years ago.  The technical department said they would be happy to send someone over, and I'm pretty sure I had to wait until the weekend.  The guy they sent over told me "it was not his job". 

He sent me one of those evaluation forms with the name and phone number of his supervisor, and I also received a phone call later where I was supposed to rate the quality of the service.

When he was here, it seemed as if it were more of situation like he didn't know HOW to do the work, more than it wasn't part of his job. 

I called the supervisor back and explained what had happened, and rescheduled for the following weekend.  And for the following weekend we also had additional work for another TV set that had to be reconnected with a new stereo antenna and a new DVD player, it is one of the older tube sets, probably something I could have done myself, except the set is very large.  One time the set fell over and required some repairs, so I didn't want to play with it.  

The second time the ATT tech did fine with the old tube set, but could not manage the home theater gear and the flat screen in the other room, so it cost us another fee.  And during the next week I had to chase his supervisor around to get someone here over the third weekend in a row.  \

I was starting to become seriously upset at this point, since I usually work 12-14 hours days and if I have to take a day off for something like this, I get upset if it doesn't get done. 

The third time this (bozo) visited, we were charged, and everything is still in pieces, all over in various room all over my house. 

At this point I haven't been able to even turn on my TV set in over a month.  I'm so disgusted I'm about to scream.  I don't want these people back in my house.  We've been paying to keep our numbers unlisted, and they are all over several versions of the yellow pages, white pages, and the ATT installers damaged a lamp in my office (cost over $80 to repair).  Did not tell anyone.  Door to door solicitation is illegal in the town where I live, I should have slammed the door in the woman's face, at this point I'm contacting the PUC, CA State Attorney Gen'ls office, and I have a few childhood friends and former coworkers who are attorneys so we'll see what happens next.  This is outrageous that we should have to put up with this. 

I asked about plenty of things, and was lied to about every one of them, including the VOIP system which I never would have allowed in my house.   That's a security nightmare from the word go.  I've had to install hundreds of dollars worth of equipment to keep these ATT monkeys out of my network, and now I've also had to spend countless hours extracting data from other devices that were left vulnerable by this crappy VOIP network that the cute little pregnant girl on my doorstep lied to me about and sold me, after I asked her about it and she sold me down the river, and lied to me about the channel lineup and just about everything else. 

And now I'm stuck paying $306 per month???  At the beginning of 2011 it was only $184, and now ATT is now refusing to renegotiate rates and is now telling me that I have to start to think about downgrading services if I want to pay less? 

 

I live about a 3 minute walk from the library, that's always been free, and I've never had to pay unless I wanted to print something or make a photocopy. 

 

And they have a gigantic section of DVDs to check out for 3 weeks at a time?  or 6 weeks?  It's free. 

 


flexy633_1 wrote:

Hello everyone!  We had the AT&T tech out here on April 26 to install our U-Verse system.  However, none of our components (i.e. VCR, DVD player, stereo receiver, or stereo speakers) were hooked up yet (they weren't unpacked).  He just installed the AT&T receiver to our HDTV.  We have a brand new Phillips 42" HDTV.  The VCR is a late 90's Sony SLV-N71.  The DVD player is a 2005 Sony DVPN5V57P.  I have these hooked up to a Technics SA-EX300 receiver from the mid-90's powering some 901 Bose speakers which have their own equalizer.

 

As you can guess, there are many wires everywhere.  On top of that we have an early 90's Fisher cassette player/recorder.  They all worked fine when we had Comcast basic service (no set up box). 

 

My boyfriend is losing his mind and I'm losing my patience because he cannot get this setup.  He bought one HDMI calbe and tried to connect it from the TV to the AT&T receiver and he put the source for the TV to HDMI1 and the TV flashes the picture for a split second and then, shows what souce it's on.  He tried it on HDMI 2, then 3 and it does the same thing. 

 

He cannot get the VCR and DVD connected either.  Can someone provide a step by step connection guide since AT&T is worthless and they want to send someone out here for $300 to hook it all up.  I would really appreciate your help.  Oh, and the book provided by AT&T doesn't help.  Obviously, otherwise we wouldn't have a bunch of people coming on this message board asking for assistance.

 

Thanks!

 

Joanne


Yes, they did the exact same thing to me.  I called customer service~~this happened over 2 years ago.  The technical department said they would be happy to send someone over, and I'm pretty sure I had to wait until the weekend.  The guy they sent over told me "it was not his job". 

He sent me one of those evaluation forms with the name and phone number of his supervisor, and I also received a phone call later where I was supposed to rate the quality of the service.

When he was here, it seemed as if it were more of situation like he didn't know HOW to do the work, more than it wasn't part of his job. 

I called the supervisor back and explained what had happened, and rescheduled for the following weekend.  And for the following weekend we also had additional work for another TV set that had to be reconnected with a new stereo antenna and a new DVD player, it is one of the older tube sets, probably something I could have done myself, except the set is very large.  One time the set fell over and required some repairs, so I didn't want to play with it.  

The second time the ATT tech did fine with the old tube set, but could not manage the home theater gear and the flat screen in the other room, so it cost us another fee.  And during the next week I had to chase his supervisor around to get someone here over the third weekend in a row.  \

I was starting to become seriously upset at this point, since I usually work 12-14 hours days and if I have to take a day off for something like this, I get upset if it doesn't get done. 

The third time this (bozo) visited, we were charged, and everything is still in pieces, all over in various room all over my house. 

At this point I haven't been able to even turn on my TV set in over a month.  I'm so disgusted I'm about to scream.  I don't want these people back in my house.  We've been paying to keep our numbers unlisted, and they are all over several versions of the yellow pages, white pages, and the ATT installers damaged a lamp in my office (cost over $80 to repair).  Did not tell anyone.  Door to door solicitation is illegal in the town where I live, I should have slammed the door in the woman's face, at this point I'm contacting the PUC, CA State Attorney Gen'ls office, and I have a few childhood friends and former coworkers who are attorneys so we'll see what happens next.  This is outrageous that we should have to put up with this. 

I asked about plenty of things, and was lied to about every one of them, including the VOIP system which I never would have allowed in my house.   That's a security nightmare from the word go.  I've had to install hundreds of dollars worth of equipment to keep these ATT monkeys out of my network, and now I've also had to spend countless hours extracting data from other devices that were left vulnerable by this crappy VOIP network that the cute little pregnant girl on my doorstep lied to me about and sold me, after I asked her about it and she sold me down the river, and lied to me about the channel lineup and just about everything else. 

And now I'm stuck paying $306 per month???  At the beginning of 2011 it was only $184, and now ATT is now refusing to renegotiate rates and is now telling me that I have to start to think about downgrading services if I want to pay less? 

 

I live about a 3 minute walk from the library, that's always been free, and I've never had to pay unless I wanted to print something or make a photocopy. 

 

And they have a gigantic section of DVDs to check out for 3 weeks at a time?  or 6 weeks?  It's free. 

 

Re: Help Installing VCR, stereo receiver, and DVD

55 of 55 (668 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post