Ask a question
Search in DIRECTV Forums

DIRECTV Forums

Reply
Posted Mar 2, 2012
7:44:29 PM
View profile
Remote Can't change volume?

Has anyone else had major issues programming the direct TV remote to turn your TV volume up/down? I have 5 HD receivers around my house with 5 tvs and none of the remotes can connect to any of the TVs. the Tvs are all different brand/models and I am inputting the proper make/model into the setup but it always says "Sorry, your remote could not be set up. Please make sure the remote is pointed at the receiver and try again". no matter how many times I try this on any TV it still fails! HELP

Has anyone else had major issues programming the direct TV remote to turn your TV volume up/down? I have 5 HD receivers around my house with 5 tvs and none of the remotes can connect to any of the TVs. the Tvs are all different brand/models and I am inputting the proper make/model into the setup but it always says "Sorry, your remote could not be set up. Please make sure the remote is pointed at the receiver and try again". no matter how many times I try this on any TV it still fails! HELP

Remote Can't change volume?

4,051 views
8 replies
(0) Me too
(0) Me too
Reply
View all replies
(8)
0
(0)
  • Rate this reply
View profile
Mar 2, 2012 7:52:20 PM
0
(0)
Professor

Try this.

Choose remote, Type in the Brand , get the code, instructions are there also.

http://www.directv.com/DTVAPP/content/remote_codes

 

After you get the TV to power off, if it still does not control the volume do this.

Program in 993 and press the Select Button ( note: the select button in this case is part of the code )

Try this.

Choose remote, Type in the Brand , get the code, instructions are there also.

http://www.directv.com/DTVAPP/content/remote_codes

 

After you get the TV to power off, if it still does not control the volume do this.

Program in 993 and press the Select Button ( note: the select button in this case is part of the code )

Re: Remote Can't change volume?

2 of 9 (339 Views)
0
(0)
  • Rate this reply
View profile
Mar 2, 2012 7:58:11 PM
0
(0)
Professor

From the remote manuals.


1. Turn on the TV.
NOTE: Please read steps 2-5 completely before proceeding.
Highlight or write down the codes and component
you wish to set up before moving on to step 2.

 

2. Locate the 5-digit code for your TV.

(See “Setup Codes for TVs” on page 15.)

 

3. Slide the MODE switch to the TV position.

 

4. Press and hold the MUTE and SELECT keys at the same
time until the green light under the TV position
flashes twice, then release both keys.

 

5. Using the number keys enter the 5-digit code for your
brand of TV. If performed correctly, the green light
under TV flashed twice.

 

6. Aim the remote at your TV and press the PWR key
once. Your TV should turn off. If it does not turn off,
repeat steps 3 and 4, trying each code for your brand
until you find the correct code.

7. Slide the MODE switch to the DIRECTV position. Press
TV POWER. Your TV should turn on.

From the remote manuals.


1. Turn on the TV.
NOTE: Please read steps 2-5 completely before proceeding.
Highlight or write down the codes and component
you wish to set up before moving on to step 2.

 

2. Locate the 5-digit code for your TV.

(See “Setup Codes for TVs” on page 15.)

 

3. Slide the MODE switch to the TV position.

 

4. Press and hold the MUTE and SELECT keys at the same
time until the green light under the TV position
flashes twice, then release both keys.

 

5. Using the number keys enter the 5-digit code for your
brand of TV. If performed correctly, the green light
under TV flashed twice.

 

6. Aim the remote at your TV and press the PWR key
once. Your TV should turn off. If it does not turn off,
repeat steps 3 and 4, trying each code for your brand
until you find the correct code.

7. Slide the MODE switch to the DIRECTV position. Press
TV POWER. Your TV should turn on.

Re: Remote Can't change volume?

3 of 9 (339 Views)
0
(0)
  • Rate this reply
View profile
Mar 5, 2012 12:30:57 PM
0
(0)
Tutor

Thank you. is there any online page that shows the 5 digit codes? I don't see any list in the manual I was given.. It is a Samsung TV, model # LN46B650T1F

Thank you. is there any online page that shows the 5 digit codes? I don't see any list in the manual I was given.. It is a Samsung TV, model # LN46B650T1F

Re: Remote Can't change volume?

4 of 9 (339 Views)
0
(0)
  • Rate this reply
View profile
Mar 5, 2012 12:31:57 PM
0
(0)
ACE - Expert

Samsung TV code is 10812

Samsung TV code is 10812

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Remote Can't change volume?

5 of 9 (339 Views)
0
(0)
  • Rate this reply
View profile
Mar 5, 2012 12:48:23 PM
0
(0)
Professor

Click on the link in post 3.

Choose the model of the remote,

choose the item to program ( default is the TV ),

type in the brand,

Click on Find Code, one code pops up,

there is another button now that says find more codes,

click on it and it will give all the codes that are supposed to work with that model.

Click on the link in post 3.

Choose the model of the remote,

choose the item to program ( default is the TV ),

type in the brand,

Click on Find Code, one code pops up,

there is another button now that says find more codes,

click on it and it will give all the codes that are supposed to work with that model.

Re: Remote Can't change volume?

6 of 9 (339 Views)
0
(0)
  • Rate this reply
View profile
Mar 5, 2012 1:51:25 PM
0
(0)
Tutor

Thanks! sorry I didn't see that link initially

Thanks! sorry I didn't see that link initially

Re: Remote Can't change volume?

7 of 9 (339 Views)
0
(0)
  • Rate this reply
View profile
Mar 5, 2012 2:07:13 PM
0
(0)
Professor

Not a problem.

Not a problem.

Re: Remote Can't change volume?

8 of 9 (339 Views)
0
(0)
  • Rate this reply
View profile
Mar 5, 2012 6:25:09 PM
0
(0)
ACE - Expert

make sure that you use  10812 as this code has the right buttons mapped for the Samsung TV's

make sure that you use  10812 as this code has the right buttons mapped for the Samsung TV's

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Remote Can't change volume?

9 of 9 (339 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post