Ask a question
Search in DIRECTV Forums

DIRECTV Forum

Reply
Posted Jul 10, 2014
7:36:46 AM
Re: Audio Issues

Hi. Am having an issue with my main DVR in the living room, which is an HR24-100. The problem is now consistent every time the TV and DVR has been off, and I turn on in the morning. There is video, but no audio. The audio controls on the remote control are rendered useless.....although I can change channels without issue. Volume doesn't work, mute doesn't work, no audio. When I attempt to turn everything off and try to turn on again, only the DVR goes off, and the video then freezes. I push on again, and the box comes back on, but still no audio.Then, within a minute or so, the tv turns itself off,and then comes back on again. Now the audio is restored, and an error message flashes that an error has occurred and been fixed.

I have also noticed lately, that for some reason when watching recorded programs,every command is now followed by that beep that you get when you have pressed a button in error.

Can't figure out what is going on and why this has started happening. Mostly on the main tv, but it has also happened once on the bedroom tv that is connected via whole house dvr.

Thanks in advance for any suggestions!

Hi. Am having an issue with my main DVR in the living room, which is an HR24-100. The problem is now consistent every time the TV and DVR has been off, and I turn on in the morning. There is video, but no audio. The audio controls on the remote control are rendered useless.....although I can change channels without issue. Volume doesn't work, mute doesn't work, no audio. When I attempt to turn everything off and try to turn on again, only the DVR goes off, and the video then freezes. I push on again, and the box comes back on, but still no audio.Then, within a minute or so, the tv turns itself off,and then comes back on again. Now the audio is restored, and an error message flashes that an error has occurred and been fixed.

I have also noticed lately, that for some reason when watching recorded programs,every command is now followed by that beep that you get when you have pressed a button in error.

Can't figure out what is going on and why this has started happening. Mostly on the main tv, but it has also happened once on the bedroom tv that is connected via whole house dvr.

Thanks in advance for any suggestions!

Re: Audio Issues

203 views
4 replies
(0) Me too
(0) Me too
Reply
View all replies
(4)
0
(0)
  • Rate this reply
View profile
Jul 10, 2014 8:05:30 AM
0
(0)
ACE - Expert

How is your HR24 connected to the TV? Or is it connected via an AVR?

How is your HR24 connected to the TV? Or is it connected via an AVR?

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Audio Issues

2 of 5 (15 Views)
0
(0)
  • Rate this reply
View profile
Jul 11, 2014 11:33:07 AM
0
(0)
Tutor

I believe it is an HDMI cable.

I believe it is an HDMI cable.

Re: Audio Issues

3 of 5 (15 Views)
0
(0)
  • Rate this reply
View profile
Jul 11, 2014 12:26:03 PM
0
(0)
Expert

Go to the audio setup menu on the DVR and set Dolby to off.

Go to the audio setup menu on the DVR and set Dolby to off.

Re: Audio Issues

4 of 5 (15 Views)
0
(0)
  • Rate this reply
View profile
Jul 12, 2014 12:32:16 PM
0
(0)
Tutor

Dolby is already set to off. I switched out the remote control, and that seemed to work. Everything came on ok this morning after having been off all night. But then tv and box were off for about 2 hours, turned on and had the same problem again.

Dolby is already set to off. I switched out the remote control, and that seemed to work. Everything came on ok this morning after having been off all night. But then tv and box were off for about 2 hours, turned on and had the same problem again.

Re: Audio Issues

5 of 5 (15 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post