Ask a question
Search in DIRECTV Forums

DIRECTV Forums

Reply
Posted Oct 24, 2013
1:42:08 PM
View profile
Genie with Denon Amp

I just upraded to a HR34 from a HR24. I have it connected via HDMI to a Denon 3808 amp. It only show volume display from amp on my tv when on a 480,1080i channel. When on a 720p channel no display is shown. My other box's HR20 and HR24 never had this problem. I had to uncheck 720p in settings resolutions to get the display to work on the HR34. Is it a glitch with HR34 or just my box.

I just upraded to a HR34 from a HR24. I have it connected via HDMI to a Denon 3808 amp. It only show volume display from amp on my tv when on a 480,1080i channel. When on a 720p channel no display is shown. My other box's HR20 and HR24 never had this problem. I had to uncheck 720p in settings resolutions to get the display to work on the HR34. Is it a glitch with HR34 or just my box.

Genie with Denon Amp

158 views
4 replies
(0) Me too
(0) Me too
Reply
View all replies
(4)
0
(0)
  • Rate this reply
View profile
Oct 24, 2013 1:49:08 PM
0
(0)
ACE - Expert

First thing to try is resetting your DVR/Receiver using the red button behind the front panel access card door. See if that helps. ( on side panel on H25 receivers).

First thing to try is resetting your DVR/Receiver using the red button behind the front panel access card door. See if that helps. ( on side panel on H25 receivers).

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Genie with Denon Amp

2 of 5 (3 Views)
0
(0)
  • Rate this reply
View profile
Oct 24, 2013 2:53:43 PM
0
(0)
Contributor

Reset did not work. I could get it to diplay Denon info when pressing menu on denon remote. Screen goes blank for a second then denon menu info comes up along with volume display. When i change the the channel to a different resolution the same problem occurs. No denon volume display

Reset did not work. I could get it to diplay Denon info when pressing menu on denon remote. Screen goes blank for a second then denon menu info comes up along with volume display. When i change the the channel to a different resolution the same problem occurs. No denon volume display

Re: Genie with Denon Amp

3 of 5 (3 Views)
0
(0)
  • Rate this reply
View profile
Oct 24, 2013 3:48:18 PM
0
(0)
Mentor

In my opinion,  only resolution U should even have checked is 1080i,  if U have HIDEF TV.  I have that Denon and it works beautifully.

Actually my Denon 3808i is just a receiver,  so I may be talking out of school here.  Although Native off and 1080i gives U everything U will ever need for HD.  Nothing will improve it.

In my opinion,  only resolution U should even have checked is 1080i,  if U have HIDEF TV.  I have that Denon and it works beautifully.

Actually my Denon 3808i is just a receiver,  so I may be talking out of school here.  Although Native off and 1080i gives U everything U will ever need for HD.  Nothing will improve it.

Re: Genie with Denon Amp

4 of 5 (3 Views)
0
(0)
  • Rate this reply
View profile
Oct 25, 2013 4:24:31 AM
0
(0)
Expert

I agree with Billy, I run a HR34 plus a 1913 Denon and I set native to off and put a check mark on only the 1080i resolution (plus 1080p if your Denon and TV will handle it and you're using HDMI).  This has the added benefit of making channel changes much smoother and a bit quicker.

I agree with Billy, I run a HR34 plus a 1913 Denon and I set native to off and put a check mark on only the 1080i resolution (plus 1080p if your Denon and TV will handle it and you're using HDMI).  This has the added benefit of making channel changes much smoother and a bit quicker.

Re: Genie with Denon Amp

5 of 5 (3 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post