Ask a question
Search in DIRECTV Forums

DIRECTV Community

Reply
Posted Jun 15, 2013
1:12:15 PM
View profile
Cinema Connection Kit not accepting Security Key

When I try to connect and set-up my Cinema Connection Kit to my Whole-Home DVR via my wireless router, I am getting a security key not accepted error.

 

Here's the information about my system:

Router is Linksys E2000, using WPA2/WPA Mixed Mode security, and my Security Key and Router Name are all upper and lower case letters and numbers, no special characters or spaces.

 

DirecTV receiver is H24 / 500, SWIM Connected, Whole-Home DVR.

 

These devices have been connected and working before, but since moving (and still using same internet service provider, router and  Directv equipment) they have not been connecting.

 

Any help would be appreciated.

When I try to connect and set-up my Cinema Connection Kit to my Whole-Home DVR via my wireless router, I am getting a security key not accepted error.

 

Here's the information about my system:

Router is Linksys E2000, using WPA2/WPA Mixed Mode security, and my Security Key and Router Name are all upper and lower case letters and numbers, no special characters or spaces.

 

DirecTV receiver is H24 / 500, SWIM Connected, Whole-Home DVR.

 

These devices have been connected and working before, but since moving (and still using same internet service provider, router and  Directv equipment) they have not been connecting.

 

Any help would be appreciated.

Cinema Connection Kit not accepting Security Key

7,507 views
6 replies
(0) Me too
(0) Me too
Post reply
View all replies
(6)
0
(0)
  • Rate this reply
View profile
Jun 15, 2013 5:07:12 PM
0
(0)
ACE - Expert

try holding the reset button on the back of the CCK-W for 30 seconds.  then on your HDDVR press

 

 

MENU SETTINGS & HELP SETTINGS NETWORK SET UP RESTORE DEFAULTS CONNECT NOW GET CONNECTED WIRELESS.  the receiver will then scan for Wi-Fi networks and should d find yours.  once it finds your SSID, select your network name.  if your network is secured, it will ask you to type in your password.  if successful, you will get a message that says "congratulations, your receiver is connected to the internet"  Note that your SSID and/or password cannot have any spaces and/or special characters

try holding the reset button on the back of the CCK-W for 30 seconds.  then on your HDDVR press

 

 

MENU SETTINGS & HELP SETTINGS NETWORK SET UP RESTORE DEFAULTS CONNECT NOW GET CONNECTED WIRELESS.  the receiver will then scan for Wi-Fi networks and should d find yours.  once it finds your SSID, select your network name.  if your network is secured, it will ask you to type in your password.  if successful, you will get a message that says "congratulations, your receiver is connected to the internet"  Note that your SSID and/or password cannot have any spaces and/or special characters

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Cinema Connection Kit not accepting Security Key

2 of 7 (434 Views)
0
(0)
  • Rate this reply
View profile
Jun 16, 2013 8:31:55 AM
0
(0)
Contributor

Those were the first steps I tried (and have retried several times), and why I was explicit in saying the no special characters/spaces in the security key in my original post. That's a common issue I've seen, and it's not a problem here.

It still refuses to accept my Security Key. What now?

Those were the first steps I tried (and have retried several times), and why I was explicit in saying the no special characters/spaces in the security key in my original post. That's a common issue I've seen, and it's not a problem here.

It still refuses to accept my Security Key. What now?

Re: Cinema Connection Kit not accepting Security Key

3 of 7 (434 Views)
0
(0)
  • Rate this reply
View profile
Aug 15, 2013 3:09:38 PM
0
(0)
Contributor

Did you ever get resolution on this?  I'm running into the exact same issue.  DTV told me to call Lynksys who connected me to a 3rd party and want $129 dollars to fix my Lynksys router.  I hung up. 

Did you ever get resolution on this?  I'm running into the exact same issue.  DTV told me to call Lynksys who connected me to a 3rd party and want $129 dollars to fix my Lynksys router.  I hung up. 

Re: Cinema Connection Kit not accepting Security Key

4 of 7 (434 Views)
0
(0)
  • Rate this reply
View profile
Aug 15, 2013 4:15:44 PM
0
(0)
ACE - Expert

Are you using WPA or WEP as your encryption?

Are you using WPA or WEP as your encryption?

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Cinema Connection Kit not accepting Security Key

5 of 7 (434 Views)
0
(0)
  • Rate this reply
View profile
Aug 30, 2013 9:25:03 AM
0
(0)
Tutor

I had this same problem with my system. My devices are not the same as yours but.... this is what I did and I was able to connect.

I had to use the advanced settings to put my IP address in manually. You have to get the information from the router.

Go to a browser on your computer and type in 192.168.1.1 (most routers) and type in username and password, (which should be on the router somewhere). Then find the IP address for the connection kit. Take that info and type it in to the boxes from the advanced settings screen on your TV.

I hope this helps.

I had this same problem with my system. My devices are not the same as yours but.... this is what I did and I was able to connect.

I had to use the advanced settings to put my IP address in manually. You have to get the information from the router.

Go to a browser on your computer and type in 192.168.1.1 (most routers) and type in username and password, (which should be on the router somewhere). Then find the IP address for the connection kit. Take that info and type it in to the boxes from the advanced settings screen on your TV.

I hope this helps.

Re: Cinema Connection Kit not accepting Security Key

6 of 7 (434 Views)
0
(0)
  • Rate this reply
View profile
Aug 2, 2014 6:29:31 AM
0
(0)
Contributor

This worked for me. Thanks for the idea. I am connected up in a different way. I do not have access to the wireless router I use because I am in a campground. So I connected through the wireless wizard and everything was fine but it kept saying it would not accept the security key, but it did appear to connect but had no internet. So I went to the advance settings as you posted. Since I did not have access to the router I connected through my laptop to the campground router and then went to the wireless properties and copied all of the information into the advanced settings. Since I did not know the IP address to use I just guessed one near the one on my laptop and it accepted it. Works great.

Thanks for the post.....a year later...

This worked for me. Thanks for the idea. I am connected up in a different way. I do not have access to the wireless router I use because I am in a campground. So I connected through the wireless wizard and everything was fine but it kept saying it would not accept the security key, but it did appear to connect but had no internet. So I went to the advance settings as you posted. Since I did not have access to the router I connected through my laptop to the campground router and then went to the wireless properties and copied all of the information into the advanced settings. Since I did not know the IP address to use I just guessed one near the one on my laptop and it accepted it. Works great.

Thanks for the post.....a year later...

Re: Cinema Connection Kit not accepting Security Key

7 of 7 (434 Views)
Share this post
Share this post