Helpful Links

Volume goes up instead of down!

Volume goes up instead of down!

I was able to program my remote so that I can change channels and turn the TV on and off, but no matter which code I use, I am unable to lower the volume. When I press the volume down button, the volume goes up! I would really like to resolve this.

My TV is a Magnavox, Model 20MF605T/17

Anybody have a solution for this?

410 Views
Message 1 of 11
Employee

Re: Volume goes up instead of down!

try code 10054

Employee Contributor*
*I am an AT&T employee and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Message 2 of 11

Re: Volume goes up instead of down!

I've already tried that one. I did some internet searching for codes, and literally tried 30 different codes. Some of them are successful at turning the TV on an off, and changing the stations, but none of them make the volume function work properly...

Message 3 of 11
Employee

Re: Volume goes up instead of down!

does the TV original remote works fine?

is this a TV/DVD combo?

I am afraid you may be out lock

Employee Contributor*
*I am an AT&T employee and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Message 4 of 11

Re: Volume goes up instead of down!

It's not a DVD/TV combo. I do have the original remote...

Message 5 of 11
ACE - Expert

Re: Volume goes up instead of down!

Does it work properly with the original remote?

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 6 of 11

Re: Volume goes up instead of down!

The TV's remote seems to work OK, but I was hoping to have one master remote (Direct TV) rather than having to toggle between two. Can the TVs original remote be used to operate the Direct TV? To access the Direct TV guide, etc?

Message 7 of 11
ACE - Expert

Re: Volume goes up instead of down!

Probably not.  Check your TV remote's owner's manual.  Most TV remotes cannot control DirecTV equipment.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 8 of 11
Professor

Re: Volume goes up instead of down!

Try searching by volume down, with tv on, volume up but muted:

1. tv

2. press and hold MUTE & SELECT for two blinks

3. enter 9 9 1, wait two blinks

4. enter 1

5. press and release VOL Down

6. point the remote at the tv and keep pressing and releasing the CH UP key, if and when the volume changes

7. press select to lock in code

Keep in mind there are over 400 brands of tv, many having more than one code, give it a chance.

Message 9 of 11

Re: Volume goes up instead of down!

Thanks! I'll give it a try!

Message 10 of 11

Re: Volume goes up instead of down!

I followed your directions and continued pressing the Channel Up button, but instead of the volume going up, it eventually just turned the TV off. Any other suggestions?

Message 11 of 11
Share this topic
Announcements

Need immediate assistance with your bill or technical issue? Don’t wait, Click here to chat with us. You can also check out some helpful articles below!

Additional Support