03-05-2014 6:46 AM
I have two Pioneer receivers in my equipment rack. One of them is VSX-70 and I can set it up as "Receiver 2" so my Pioneer remote will work with it and not the other/older one. According to Pioneer, this puts the AVR/Remote into a sub frequency of the default one.
I want to use my Genie remote to control the volume on my receiver. This works when it is setup as "Receiver 1", but then both AVRs respond and I don't want that. Genire
Does anyone know if there is an RC71 code for Pioneer that will work when the receiver is set as Receiver 2 or 3 or 4?
PS - why is VSX-70 not listed as one of the codes for Pioneer in the Genie remote setup?
03-05-2014 7:24 AM
Doubtful that the RC71 will support multiple codes for the same device. All you can do is try all the codes under Pioneer and select the "I don't know the model number" option
03-05-2014 11:17 AM
Why not simply power down the receiver that you don't want to use? The IR signal from the RC71 should not affect a powered down device.
03-05-2014 11:41 AM
True, the volume control wouldn't affect the turned off AVR, but I still have two receivers that would be using the same remote codes, so that doesn't really work. I suppose I'll have to look at some other universal remote that *would* support the Receiver 2 option of Pioneer.
03-05-2014 2:03 PM
you need to look for remote that is able to "learn" codes
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!