How does one get the Directv Remote RC65X to operate selective functions on the TCL 43S403 4k TV. I have tried all the suggestions on the Internet, Directv manual, TCL web site, including programming in 11756 after clearing codes. Help.
To program your RC65X remote to work with your TCL 43S403 4k TV follow theses instructions;
Press and hold MUTE and SELECT buttons simultaneously. Release the buttons after the green light at the top of the remote flashes twice.
Enter the 5-digit code 11756
Aiming the remote at the television, press VOLUME UP. (If the volume doesn’t increase, try a different code and repeat steps 2-4. The DIRECTV website has a list of instructions to scan for additional codes. When the volume increases, proceed to step 4.)
Again pressing MUTE and SELECT simultaneously, look for the green light at the top of the remote control to flash twice.
Using the remote control keypad, enter the number 960. The same green light on the remote should flash twice again.
Move the MODE switch to the DIRECTV position.
Thank you for being part of the Community Forums, and have a terrific weekend.
Anthony, AT&T Community Specialist
Need help? Ask a question to get help from the AT&T Community or support from AT&T specialists. If this reply helped you please use Accept solution to mark it as an Accepted Solution.
*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.