Explore & discover

Helpful Links

TCL sync with Directv remote

Highlighted
Tutor

TCL sync with Directv remote

How does one get the Directv Remote RC65X to operate selective functions on the TCL 43S403 4k TV. I have tried all the suggestions on the Internet, Directv manual, TCL web site, including programming in 11756 after clearing codes. Help.

31,356 Views
Message 1 of 5
Administrator
Solution
Accepted by topic author
Accepted by RWS1941
‎06-19-2018 7:52 PM

Re: TCL sync with Directv remote

Good evening @RWS1941,


To program your RC65X remote to work with your TCL 43S403 4k TV follow theses instructions;


  1. Press and hold MUTE and SELECT buttons simultaneously. Release the buttons after the green light at the top of the remote flashes twice.
  2. Enter the 5-digit code 11756
  3. Aiming the remote at the television, press VOLUME UP. (If the volume doesn’t increase, try a different code and repeat steps 2-4. The DIRECTV website has a list of instructions to scan for additional codes. When the volume increases, proceed to step 4.)
  4. Again pressing MUTE and SELECT simultaneously, look for the green light at the top of the remote control to flash twice.
  5. Using the remote control keypad, enter the number 960. The same green light on the remote should flash twice again.
  6. Move the MODE switch to the DIRECTV position.

Thank you for being part of the Community Forums, and have a terrific weekend.


Anthony, AT&T Community Specialist




Need help?
Ask a question to get help from the AT&T Community or support from AT&T specialists. If this reply helped you please use Accept solution to mark it as an Accepted Solution.
*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Tags (2)
Message 2 of 5
Tutor
Solution
Accepted by topic author
Accepted by RWS1941
‎06-19-2018 7:52 PM

Re: TCL sync with Directv remote

Anthony,
I think what gets left out in most directions is that initially one needs to slide the mode switch to TV.

I’m not sure, but the encoding of 960 before sliding the mode switch to Directv may be superfluous. Still need to use “tv input” to select satellite.
Tags (1)
Message 3 of 5
Administrator

Re: Re: TCL sync with Directv remote

Hello @RWS1941,


We appreciate your feedback.  I apologize as I think it was I who skipped over you need to switch to “TV Mode”.


Thank you for being part of the Community Forums, and enjoy your weekend.


Anthony, AT&T Community Specialist


Need help?
Ask a question to get help from the AT&T Community or support from AT&T specialists. If this reply helped you please use Accept solution to mark it as an Accepted Solution.
*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Message 4 of 5
Community Manager

Re: Re: TCL sync with Directv remote

I would like to thank everyone for taking the time to post your comments and opinions related to this subject, and a great solution!

 

This topic is now closed. To discuss a new topic, please use the "Ask A Question" button above.

 

Thank you,

Dmitriy


Rethink Possible


Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions: Learn More.

*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Message 5 of 5
Share this topic
Share this topic
Announcements

If your DIRECTV account has recently moved into myAT&T, let us help you manage your DIRECTV account in myAT&T.

Additional Support