- edited 12-31-2015 11:06 AM by Phil-101
My GENIE has hooked up to my internet wireless by itself. I do not want DIRECTV to be paired with my internet. It made the wireless connection without me knowing about it.
I was checking my NETWORK SHARING CENTER in CONTROL PANEL on my computer, and I saw DIRECTV is sharing my network. I do not want DIRECTV on my network.
HOW DO I REMOVE IT??
[Edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]
Solved by: Go to Solution.
12-29-2015 1:49 PM
To disconnect the Genie receiver from the Internet try the folling: press the Menu button on the remote control and then go to Settings & help > Settings > Internet Setup > Advanced and then Reset Network.
Do you have wireless Genie minis?
12-29-2015 4:38 PM
Why woldnt you wnat the benfits if ahving your Genie connected to the internet? wihtout an internt connection you will loose access to Video on Demand and the restart features, all included at no extra cost!
12-31-2015 6:34 AM
If your Genie connected by itself and there is no other connection point in your DIRECTV system, that suggests that you may have an open (unpassworded) Wi-Fi network. Might want to be careful there.
12-31-2015 1:36 PM
IT DISCONNECTED FOR A DAY, THEN RECONNECTED AGAIN.
I DISCONNECTED IT AGAIN FOLLOWING YOUR INSTRUCTIONS.
IS THERE SOME WAY TO GO TO "SETTINGS" AND CLICK ON SOMETHING THAT TELLS THE GENIE NOT TO CONNECT TO WI-FI?
12-31-2015 1:43 PM
They don't connect by themselves someone has to enter the SSID and password.
Are you in an apt. or condo with a shared Dish?
02-03-2016 7:19 AM
Because in my instance, my Genie somehow managed to use up my 5 gig monthly allotment in a day and half. We weren't doing anything that required an internet connection.
02-03-2016 1:03 PM
It is never recommended to connect the receiver if you are on a data cap. The receiver does background downloads of data.
08-28-2016 12:10 PM
None of the Genies can output 4K over HDMI so you will also need a C61K mini and only the internet will be wireless on the TV.
08-28-2016 12:47 PM
i want to buy the new Epson - Home Cinema 5040UBe 1080p Wireless 3D 3LCD Projector . shouldnt the video bridge relate and pick up the signal to the projector?
- edited 08-28-2016 1:31 PM
No, wireless is only for internet connection, the WVB only connects to a C41W mini and it is not 4K, DTV is a long way from 4K wireless if ever.
- edited 08-28-2016 4:26 PM
@ern2burn1 what ever wireless solution this projector has does not have anything to do with DIRECTV. You will connect any source, be it a DIRECTV receiver or Blue Ray player via HDMI. The Wireless Video Bridge creates a DIRECTV internal network only to be used with DIRECTV wireless clients, it has no other use for the customer.