Analog output connector for wireless Genie Mini

Contributor

Analog output connector for wireless Genie Mini

I have a wireless Genie Mini that will be connected to an old TV without an HDMI input. The Genie Model: C41W-100 unit has HDMI output only - there is also a multi plug port on the rear but I have no wire to use this connector. Where can I get one?

Message 1 of 2
ACE - Expert

Re: Analog output connector for wireless Genie Mini

If it's an SDTV with only yellow/red/white connections you will need this "dongle":

http://www.solidsignal.com/pview.asp?p=10pincompos

If your SDTV is really old and only has a coax input you will need to convert the composite output from the dongle using a modulator like this one:

http://www.solidsignal.com/pview.asp?p=CRF907&ss=228789

If it's an old HDTV with component inputs (red/green/blue) connections you will need this one:

http://www.solidsignal.com/pview.asp?p=h2510pin

You will of course also need the appropriate cables

You can get these items from several online stores, I am just using solid signal as an example.

You need to make very sure you get the correct dongle.

If DirecTv did this installation the installer should have provided the correct dongle.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 2 of 2
You must type a description before you click preview or reply.
Share this topic
Announcements

Welcome to the DIRECTV DVR & Receivers boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!

Is your service down? Click here to chat with us!

Additional Support