Ask a question

    Reply
    Posted Jan 25, 2013
    5:22:48 AM
    View profile
    Pantech Burst Battery/Charging issues

    I am surprised that no one else has posted issues with this....

    My first Pantech Burst did not seem to hold a charge very long - 36 hours tops - and I wasn't even using the phone much. Tech reps all insisted this was "normal".  It only took a couple of weeks before phone stopped charging altogether.

    AT&T sent me a replacement charger - but since I suspected it was the phone I stopped by an AT&T store and they verified it was NOT the charger.

    I was sent a new phone.

    Worked like a dream - hel the charge for 2-3 days.. until this morning.

    Same problem - plug it in charger and ...NOTHING!

     

    This time they are just sending me a replacement battery.

    I am thinking that they have a warehouse full of bad phones and batteries that they keep sending me!

    But in the meantime - I have no phone again.

    Any one else have this problem, and how did you see it resolved?

    Pantech Burst Battery/Charging issues

    5,520 views
    5 replies
    (0) Me too
    (0) Me too
    Post reply
    View all replies
    (5)
    0
    (0)
    • Rate this reply
    View profile
    Jan 25, 2013 5:48:09 AM
    0
    (0)
    Professor
    You need to contact cpsc.gov regarding this issue, so that they can investigate into why it is happening. The battery was the manufacturer battery, no third party battery, correct? How long have you had the phone?
    ________________________________________________________________

    "Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

    Stimpy: So what'll happen?

    Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
    ________________________________________________________________

    Re: Pantech Burst Battery/Charging issues

    2 of 6 (5,512 Views)
    0
    (0)
    • Rate this reply
    View profile
    Jan 25, 2013 5:53:35 AM
    0
    (0)
    Contributor

    First phone was maybe about 2 months.

    This second phone about 2 months or less.

    No third party equipment - all direct from AT&T

    Re: Pantech Burst Battery/Charging issues

    3 of 6 (5,506 Views)
    0
    (0)
    • Rate this reply
    View profile
    Jan 25, 2013 7:54:51 AM
    0
    (0)
    Professor
    Let cpsc.gov know what happened, so that they can look into the issue.
    ________________________________________________________________

    "Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

    Stimpy: So what'll happen?

    Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
    ________________________________________________________________

    Re: Pantech Burst Battery/Charging issues

    4 of 6 (5,488 Views)
    0
    (0)
    • Rate this reply
    View profile
    Jan 25, 2013 8:33:50 AM
    0
    (0)
    ACE - Professor

    Might just be a defective batch of batteries or phones.  It happens.

    *The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

    Re: Pantech Burst Battery/Charging issues

    5 of 6 (5,483 Views)
    0
    (0)
    • Rate this reply
    View profile
    Jul 3, 2015 1:08:39 AM
    0
    (0)
    Contributor
    I realize this thread is two years old but I just want to point out that the circuitry in the pantech burst in particular doesn't allow the phone to realize there is a battery at all when the battery runs down to zero. Just bought this phone again... Had it a few years ago and remember it being amazing. Did not have this problem at all back then. So one fix is to chop open a usb charger. There's a red positive wire and a black negative. Also a green and white. Put the green and white aside that's for data transfer. On your battery is a plus symbol and a minus. Secure the red to the metal by the plus sign. And the black to the metal by the minus. Plug it into the wall and wait a while. After it picks up a decent charge your phone will recognize your battery and the normal charger will work again.

    Re: Pantech Burst Battery/Charging issues

    6 of 6 (159 Views)
    Share this post
    Share this post