UVerse box master volume

Teacher

UVerse box master volume

Is there a way to adust the master volume on the reciever box.  After I program my TV remote I can't find a way to adjust the volume on the reciever.  If possible I would prefer to set my TV volume and use the master volume control instead of setting the master volume and adjusting the TV volume while watching.

 

My issue is....I set up a new HDTV a couple weeks ago and when I pause/unpuase I get a 'pop' sound from the speakers.  Kinda like if you plugged in a guitar to an amp that had the volume turned up high.  It seems like it is causeing a little undue stress and I would like to lessen it.  I'm pretty sure that if I turn the master volume down that this will lessen the pops.

 

However, the only way that I can figure to do this would be to unprogram the TV from the remote, adjust the master volume, and then reprogram the TV on the remote. 

 

There must be an easier way, right?

 

 

Message 1 of 9 (89,093 Views)
ACE - Expert
Solution
Accepted by topic author rockychai
‎09-30-2015 1:39 AM

Re: UVerse box master volume

The code for volume control assignment is 955. Press att/ok at the same time. Then 955.

If you then press enter (bottom right) the volume control will follow the mode key. When the att key is active (normal watching for channel changes) the volume changes in the STB. When the TV key is active the TV volume changes.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 2 of 9 (89,084 Views)
Teacher

Re: UVerse box master volume

Thank you -

That did exactly what I was looking to do- control the volumes according to the mode key selected.

-Cheers

Message 3 of 9 (89,073 Views)
ACE - Expert

Re: UVerse box master volume

Glad I could help. And, thanks for letting us know it was a good solution for you.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 4 of 9 (89,071 Views)
Teacher

Re: UVerse box master volume

One more thing.... Let's say I want to return to the default volume settings with the TV volume as the dominant choice.   How would I do that? 

 

Also, is there a list of codes online for the remote settings?

 

 

Message 5 of 9 (89,026 Views)
Teacher

Re: UVerse box master volume

The following link contains the programming methods required to change the volume settings

http://www.uverseremote.com/setting-up-your-volume-channel-and-power-options-on-uverse-remote/
Message 6 of 9 (88,988 Views)
Former Community Manager
Solution
Accepted by jamileh (Former Community Manager)
‎09-30-2015 1:39 AM

Re: UVerse box master volume

Here is a link with information about multipe U-Verse remotes. 

 

Each section contains a programming guide, a troubleshooting guide and a user guide. 

 

http://www.att.com/esupport/article.jsp?sid=KB409004

--------------

As of May 1st, I am no longer serving as the Community Manager for AT&T. This account will no longer be able to accept private messages.

Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.

I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.
Message 7 of 9 (80,687 Views)
Contributor

Re: UVerse box master volume

This was exactly what I needed, thanks!, but I need to "undo" this. My UVerse box volume was set too low when I programmed my remote to work with my TV. Doing the "955" fixed helped me to raise the UVerse box volume to "max" but now I want to switch back to controlling the volume with my TV, not the UVerse box. Can you tell me how to change back to that?

 

Thanks,

Jake

Message 8 of 9 (58,319 Views)
ACE - Expert

Re: UVerse box master volume

JakeOMite - Sure - att/ok -955-tv-enter
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 9 of 9 (58,315 Views)
Share this topic
Announcements

: Have phone trouble? Don’t wait, fix it now! Check out the links below, help is just a click away. You can also search for answers using the search feature above.