Community Support
•
6.7K Messages
Troubleshooting your Digital Home Phone Service
- Check that all cords and wires are secure and damage-free.
- If you have more than one telephone in the home, try another handset to see if you get a dial tone.
- Restart your Wi-Fi gateway by removing the power cord for ten seconds, and then plug it back.
- Plug your phone directly into the back of the Wi-Fi gateway, as shown in the picture below, to see if any possible issues with the inside wiring.
- Check for dial tone
- Check voice features and make sure call forwarding/blocking is not enabled
- Check the call logs to see if the calls are making it through.
- If yes: check the wiring. Test with a phone plugged directly into the back of the gateway. Test with click to call.
- Login on att.com,
- Select U-verse Voice and go to Voice Features
- Go to “Make a Call,” put a phone number in and select “Call”
- Select Place Call when the window pops up
- Do this 3 times
- If no: reset your gateway
- Ensure the phone feature is enabled
- Use Star Codes
- Check online
- Test with a different phone (corded phone if possible)
- Force an update by using the “Click to Call” feature
- Login on att.com,
- Select U-verse Voice and go to Voice Features
- Go to “Make a Call,” put a phone number in and select “Call”
- Select Place Call when the window pops up
- Do this 3 times
- Check the call logs to make sure the calls are working
and showing correctly
-ATTU-verseCare
*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Accepted Solution
Official Solution
ATTU-verseCare
Community Support
•
6.7K Messages
8 years ago
Troubleshooting your U-verse Voice Service
No Dial tone
Can't Make or Receive Calls
Phone Features Not Working
and showing correctly
-ATTU-verseCare
0
0
HerbWill
Contributor
•
2 Messages
7 years ago
The service was restored a few minutes ago.
I now have a dial tone and all is well.
0
0
jonescal
Tutor
•
8 Messages
7 years ago
After converting from AT&T (legacy) landline to Uverse Voice, 3-way calling no longer works. I've called customer service several times and they have indicated that I am not initiating the service correctly. I follow the instructions per the website. After the 3rd party answers the call, I press Flash to conference all 3 parties but the call is dropped and disconnected. This last customer rep said that I need a new phone which supports 3-way calling or conferencing. This sounds like a bunch of crap from someone who probably has no clue to fix my problem. If I needed a new phone set, the instructions on the website would mention that.
0
0
JeffDecatur
Contributor
•
3 Messages
7 years ago
My U verse 3 way calling has stopped working. When the third party answers and I press flash to connect the second party, the line goes dead. Calling ATT on repeated occasions and reprovisioning the account (and modem) hasnt worked. Any suggestions?
0
0
JeffDecatur
Contributor
•
3 Messages
7 years ago
I just posted on the same issue. My 3 way calling stopped working and repeated calls to ATT havent helped. An ATT tech came to my house and assured me all was good on my end.
Reprovisioning the account and modem hasnt fixed the problem, which appears to be at the ATT end.
0
0
ATTHelp
Community Support
•
231.3K Messages
7 years ago
Hi @JeffDecatur,
Have you tested with another phone to see if the issue persists?
-ATTU-verseCare
0
0
JeffDecatur
Contributor
•
3 Messages
7 years ago
0
0
hemarajan
Contributor
•
1 Message
7 years ago
. date 27 dec 2016 tue 1026 am PST . title . att.com Internet wired or WiFi ? . I have home telephone service from att.com that is labelled as 'Phone/Internet - 2' on your web page . Is the Internet service bundled with it ? If so , is it wired or WiFi ? How do I access the service ? Thank you for answers . Sincerely , Hemarajan Shankaranarayanan Nair .
0
0
jonescal
Tutor
•
8 Messages
7 years ago
3-way calling still dead on multiple phones at my home. I did the 'unplug RG (NVG-510) for one minute before powering up' with no success. Also, did the 'factory reset' (hold down button under power outlet on RG for 30 seconds+) with no success. I talked to an AT&T Care specialist who said that 3-way calling under AT&T U-verse Voice should function identically as Legacy (landline) Voice. I believe that the problem is at the AT&T central office. Very tired of calling AT&T support and hearing the same scripted junk from the offshore personnel saying that the issue is my fault and I should get a new phone.
0
0
Jfiffer
Tutor
•
8 Messages
7 years ago
WoW! I am currently having the same issue. It works local to local but not local to long distance. I AM following the directions exactly as it states. I have spent MANY MANY MANY hours with SEVERAL technicians trying to resolve the issue. They also told me I needed new phones #%!!! I am about ready to go back to what I had but I am sure that will be a BIG headache too. Pls let me know if they ever get the issue resolved on your end.
0
0