I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

Contributor

I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

[ Edited ]

I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease. I had this same problem last night.

I went to AT&T's website to troubleshoot the problem. While there, I automatically restarted the U-verse Gateway device several times but to no avail. I made one more try at troubleshooting the problem today but I'm still having the same problem.  Please help me resolve this issue. 

Message 1 of 15 (10,851 Views)
ACE - Master

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

When you dial to you hear touch tones when you press each number?  If you hear dail pulses (like a rotory dial phone) it won't work.  Some phones have a switch that changes the mode for the dial pad from tone to pulse.  Make sure your on tone.

"If you find this post helpful and it solved your issue please mark it as a solution.  This will help other forum members locate it and will also let everyone know that it corrected your problem. If they have the same issue they will know how to solve theirs"

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 2 of 15 (10,846 Views)
Contributor

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

[ Edited ]

No, I'm getting dial pulses, and this is a touch tone phone. I see only one button in the phone cradle and it can be pointed to a big bell, a small bell or an X.

 

On the U-verse device, these lights are on: POWER, ETHERNET, PHONE 1, BROADBAND, & SERVICE. There is no green light on near: WIRELESS, PHONE 2, & USB.

I can understand why there is no light on near WIRELESS, that's because the phone I'm using is not wireless. But what about PHONE 2, & USB?

Message 3 of 15 (10,823 Views)
ACE - Expert

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

DCRamsey - What BeeBeeSA says is the most likely problem. But, you do not say if it ever worked. If it used to work & the phone is the same, it is very easy to have inadvertently moved that pulse/tone button. If your service is new - you need a tone phone - no rotary dial & no pulse settings. Another possibility is if you have an att phone. Check out these links -
http://forums.att.com/t5/Setup-and-Self-Install/Incompatible-quot-AT-amp-T-quot-phone-with-Uverse-Vo...

http://forums.att.com/t5/Setup-and-Self-Install/Incompatible-quot-AT-amp-T-quot-phone-with-Uverse-Vo...
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 4 of 15 (10,812 Views)
ACE - Expert

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

DCRamsey- What is make/model of phone??
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 5 of 15 (10,809 Views)
Contributor

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

It's a General Electric phone. It's from Atlinks USA, Inc. The model number is: 29195GE1-A

Message 6 of 15 (10,799 Views)
ACE - Expert

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

DCRamsey Searching the web - a table indicates that tone/pulse is an option for your phone, but I cannot find a manual that tells how to set it. Do you have a manual somewhere? Is there a menu button? If you do not see a slide switch it must use regular dial buttons for setting options. I will look again for a users manual.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 7 of 15 (10,775 Views)
ACE - Expert

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

DCRamsey - I did not yet find a manual, but I did find a work around that you can try. It sounds like it would apply to all phones. It is a feature for people who have pulse service & they want to enter tone to the called number. It says if you press the asterisk button it will temporarily convert the phone to tone. When you hangup it goes back to pulse. You may need to pull the plug from the jack (so that the asterisk push does not go to U-verse) hit the asterisk - replace plug - dial the number. Please try this at least once to verify that the pulse setting is the problem.

I suppose the problem could be that the tone generator has gone off frequency.

The doc that described the asterisk feature said the pulse/tone setting was a slide switch. You have said you do not have one. Can you look under a face plate or battery cover - anything that you can open??
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 8 of 15 (10,763 Views)
ACE - Master
Solution
Accepted by BeeBeeSA (ACE - Master)
‎09-30-2015 1:39 AM

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

[ Edited ]

Okay, I finally found the manual.  Here's how you do it:

 

SETTING THE DIALING MODE

This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.

1. Press the options button until SET ^ (up) or v (down) appears

2. Press the review up button until T/P DIAL MODE appears in the display.

3. Press the options button to show the current dial mode. The default is set to tone.

4. To change the dialing mode, press review up or down. The display will alternate

between the two dialing modes.

5. Press the options button to store the dialing mode and return to the T/P DIAL

MODE display.

 

 

Exiting set up mode:

To immediately exit the setup mode after your changes have been made, select the

EXIT SETUP menu and press the options button.

 

"If you find this post helpful and it solved your issue please mark it as a solution.  This will help other forum members locate it and will also let everyone know that it corrected your problem. If they have the same issue they will know how to solve theirs"

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 9 of 15 (10,740 Views)
ACE - Expert

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

Way to go BeeBee!
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 10 of 15 (10,735 Views)
Highlighted
ACE - Master

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

[ Edited ]

Hey I'm going to tell you that that manual was buried deep in the search engines.  I tried all kind of combinations until I finally got to the GE site via a link.  You can't go right to the GE site and search......it won't come up.  It must be some sort of archived document and the old link worked.

 

I found the document you posted about which read to use the * key to switch but it had no other info that was useful.

 

It took me about an hour to find it!!Smiley Mad

"If you find this post helpful and it solved your issue please mark it as a solution.  This will help other forum members locate it and will also let everyone know that it corrected your problem. If they have the same issue they will know how to solve theirs"

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 11 of 15 (10,706 Views)
Contributor

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

I have a dial tone on my bell 500 phone, but it does not go away after I daily a number ,I can not call out, but I can receive calls and it rings, can someone help me
Message 12 of 15 (5,552 Views)
ACE - Expert

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

@Denn25 - Your telephone produces dial pulses that are not recognized by u-verse voice. YO need a phone that uses touch tone. Go for panasonic wireless system & get a plethora of features.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 13 of 15 (5,539 Views)
Contributor

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

Thanx, that was the problem 
Message 14 of 15 (5,479 Views)
Contributor

Re: I have a dial tone but I cannot call anyone. When I dial a number, the dial tone does not cease.

I have this same problem: dial tone but cannot call out. 

I tried the suggested dial tone setting changes repeatedly to no avail. 

 

My phone is a V-Tech. I even purchcased a new phone thinking the device was the problem. 

 

Please help!

Message 15 of 15 (3,017 Views)
Share this topic
Announcements

: Have phone trouble? Don’t wait, fix it now! Check out the links below, help is just a click away. You can also search for answers using the search feature above.