05-21-2013 11:40 AM
I've had repetitive issues with my voice over U-Verse phone line, that has resulted in either a really static filled line, no dial tone, no sound at all or echoing. Rebooting the RG is no longer helpful, but has on a couple of attempts resulted in a solid dial tone and ability to call out but it doesn't last long before there are issues again.
My question is how to I test directly from the Gateway? As so as I remove the wire split into two wires into Phone and two wires inot Line 1 then the Broadband light goes red. I tried plugging my landline phone into the "Phone" port on the back of the Gateway but then the Broadband goes red and the Phone light that was green goes dark and no sound at all.
Not sure why the phone line going to the back of the Gateway is split two wires into one port and two wires into Line 1? From the Gateway, the wire runs to a juntion box (but is joined by a line from the alarm system), I can plug the phone into the juntion box before all the lines split into various places including the alarm system but still no dial tome. Is there an outside test port or only the Gateway? If so, why doesn't my phone work in the Gateway? I've tried different phones including an older style phone but none worked for more than a few minutes.
Anyone have ideas how to prove it is a Gateway issue?
Solved! Go to Solution.
05-21-2013 1:10 PM
05-24-2013 10:51 AM
After a reboot of the Residential Gateway (RG) using the TV menu troubleshooting tools, I was able to restore the dial tone. As you noted, to test my phone directly off the RG, I simply have to plug the phone into the "Line 1" port on the back of the RG.
Unfortunately, after a day or so the phone went back offline after hearing some static on the line. A second reboot of teh RB with the phone plugged into Line 1 did not bring back the dial tone this time, so I will try again later.
Looks like I need to schedule a technician to come out to the house and take a look at the Gateway. Now the question is that where does the AT&T network end (at the RG?) and the charged for service inside lines begin?
05-24-2013 11:06 AM
05-25-2013 3:26 PM
Thanks again, definitely not Plain Old Telephone Service (POTS), this is U-Verse Voice Over Internet Protocal (VOIP). Replaced the Residential Gateway (RG) and it works now. New one is black, and the inbound wire to the RG outside 2 wires of phone jack had to be separated some because the ports on the new black RG are farther apart than they were on the old RG. Didn't know that all the broadband comes into the house over just those two copper wires into the PHONE port on the RG all the way from the neighborhood hub. Discontined the phone from the RG and it works from anyplace in the home now.
Thanks again for the explaination!
05-25-2013 4:28 PM
: Have phone trouble? Don’t wait, fix it now! Check out the links below, help is just a click away. You can also search for answers using the search feature above.
© 2016 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!