01-14-2013 6:56 PM
Why after I get error message Nad-2902; I’m unable to browse the internet?
Solved by: Go to Solution.
01-15-2013 2:23 PM
When receiving the NAD-2902 error the very first thing to be checked will need to be all devices connected to a phone jack and make sure all devices are plugged into one of the provide filters here are some of the devices to be checked:
After verifying all devices are plugged into one of the DSL filters if needed, (People with Dry-Loop start here) you may click the "Do not Show" button to bypass.
After clicking the "Do not Show" and you are still not able to browse you will want to clear "Temporary Internet Files", "Cookies", and "History" in your browser.
Then close the browser and reopen it to verify you are able to browse.
Here's an article that may help out NAD Errors on NVG510
01-15-2013 4:01 PM
I've followed this process and it happens several times a day, is this something normal ?
01-15-2013 4:16 PM
Currently this is a known issue and AT&T is working on a resolution, sometimes the NAD-2902 is a false positive my first reply is a walk-around to the issue, but everything needs to be checked to make sure there isn't an actual issue when this error pops up.
02-04-2013 12:50 PM
I have the same issue. Tech spt is not aware of this issue. I also get NAD 3305 code. 2 Technician from ATT. says all connections are fine, tests on my line are all good. ATT did the install so it's installed correctly.
02-04-2013 1:12 PM
This happens to Motorola NVG-510 modems. I think this is a manufacturer's thing. What you can do is the following:
1. Hard reset the modem - Press and hold reset for 10 seconds
2. Perform browser maintenance - Even while the modem is performing a factory reset, clear cookies, cache and history on your browser.
3. Do not show - After doing the two steps, if the NAD error shows up, click "Do not show".
You should be able to browse seamlessly after that.
Let us know if it works.
02-04-2013 1:24 PM
Thanks, that doesn't always work, i still get that error almost daily and today the 2902 code. As you can see this is a ongoing issue, has been since UVerse was installed. The modem will not reset with the reset button, i have to unplug the power cord.
02-04-2013 6:36 PM
paulgarcia, that's the correct way to do it.
and Yes, it's the issu with NVG510 Routers only.
AT&T is working to get a permanent fix about it.
02-05-2013 5:19 AM
Hopefully, Motorola (or AT&T) comes up with an upgraded firmware soon so that we don't have to deal with this error everyday on IPDSL accounts.
And yeah, it's a Motorola thing. The AT&T service doesn't always have anything to do with this issue.
11-29-2016 11:00 AM
I am having the same problem on NVG589, started when I bundle my service, just to add directTv on my bill, at&t insisted on changing my box out to this one. Technican and supervisor had trouble connect this box was not working corect-trouble every since. Should'nt be paying for this.
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
For DSL related issues. We highly recommend chatting with our teams to address this as quickly as possible.