01-07-2013 11:49 AM
We had a working system that allowed us to get to the internet through a D-Link 524 wireless router using 802.11G (yes, it's an old router) and a Motorola ADSL modem supplied by AT&T. Yesterday, I bought a new computer and since I was turning up the new computer, I decided to put some type of encryption on the wireless side of the router. (It was previously unencrypted.) I went to 192.168.0.1 and found myself greeted by a wizard on the router. I walked though the steps, added WEP (only option available), then typed the key into several computers. Everything worked fine for about 5 minutes, then the computers all started saying that although the wireless side was fine, I couldn't reach the internet. If I plug the computers into the DSL modem--bypassing the D-link router--I can access the internet. My fear is that by using the wizard I have somehow reset some factory default on the D-Link that will no longer allow the connections. I know enough of this stuff to be dangerous, but perhaps not enough to be productive. Anyone have any ideas.
Solved! Go to Solution.
01-07-2013 12:16 PM
I should probably add a another point. At first, I thought it was the Dynamic PPPoE session between the D-link router and AT&T because the D-Link router keeps saying that the PPoE session is "connecting" and does not say "connected." AT&T support said that it can't be PPPoE authentication because I can get on the network by directly connecting to the DSL modem.
01-07-2013 1:29 PM
One more question. I went to a firend's house and see that he does NOT have PPPoE set on his Linksys router at all. Maybe I should NOT have that set on the D-link. Let the PPPoE work out of the DSL modem. That might be the problem. Funny thing is that the old D-Link router says that turning on PPoE is preferred for DSL. Maybe that was the old way of doing things. Thoughts?
01-07-2013 3:54 PM - edited 01-07-2013 3:56 PM
If you have the modem dialing directly than you will set the connection mode from PPOE to obtain ip automatically through DHCP, the PPOE is redundant in a sense if your modem is already connecting by itself, that setting is there so you can have your router sign into the DSL service, don't select the Dynamic IP option a either as that' is for cable modem connections. Alsokid think you may have posted i. the wrong area technically, assuming you don't have u-verse standalone Internet and you have true AT&T DSL, if that's the case don't be startled if a moderator changes the location of where your thread is posted.
01-08-2013 3:37 PM
I chatted with AT&T yesterday about the problem and they provided teriffic support. I did not realize that the DSL modem toggled OUT of bridged mode by my resetting the wireless router. And this is the reason that the PPPoE session in the wireless router couldn't establish. Armed with the information that AT&T provided, I was able to set the DSL modem to bridged mode and the connection came up. Bingo!
Thank you AT&T
01-08-2013 5:13 PM
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!