04-10-2012 6:57 AM - edited 04-10-2012 6:59 AM
Yesterday I switched from Elite dsl to U-verse max (12 Mbps). Ran a speed test and only hit a max of 2 mbps if im lucky, and average around 1.6 with my wired pc. Uploading only .25 mbps and doesnt really change. Ran a ping test and had 0% packet lose, 0 ms jitter and a ping of 26 which is great. I only have the U-verse internet. Nothing else is connected or running.
Im using the Motorola NVG510 At&t sent. Not sure what is going on here. Ive searched high and low for any info, but most people with slow u-verse max were still getting a much faster download speed than just 2 mbps. Any ideas?
Solved by: Go to Solution.
04-10-2012 10:26 AM
04-10-2012 11:52 AM
There is a diagnostic page on the NVG that will show your line rate both up and down. Since I don't have that modem, I'm not real familiar with how to get to it. Start at http://192.168.1.254 and wander around until you find it.
Anyway, that information will tell you whether your speed issue is due to your line conditions or something else entirely.
04-11-2012 11:13 PM - edited 04-11-2012 11:25 PM
|Downstream Sync Rate (kbps)||1787|
|Upstream Sync Rate (kbps)||288|
|SN Margin (dB)||6.0||9.2|
|Line Attenuation (dB)||71.0||44.2|
|Loss of Signal||0||0|
|Loss of Frame||0||0|
04-12-2012 12:56 PM
04-12-2012 3:28 PM
11-24-2013 2:05 PM
What exactly was the "change" to your filters that you performed? I just upgraded to Max, and things actually feel slower, though I haven't done any speed tests. Thanks
12-20-2013 7:23 PM
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
For DSL related issues. We highly recommend chatting with our teams to address this as quickly as possible.