01-19-2016 7:23 PM
I have a personal router (Asus RT-N16 flashed with TomatoUSB) behind ATT's
2Wire 3600HGV DSL gateway/wireless modem. I am trying to set up port forwarding from the Internet to devices that are connected to the personal router.
The 2Wire uses the default 192.168.x.x subdomain. I have the wireless access capability turned off and the only device attached to it is the Asus router. The 2Wire LAN port is connected to the WAN port of the Asus. The Asus creates the subdomain 10.10.49.x.
Within the 10.10.49.x subdomain, the Asus acts as:
(1) Wireless access point
(2) DHCP server
(3) Dynamic DNS (DDNS) maintenance on FreeDNS
In order to update FreeDNS with changes in the 2Wire's public (WAN) address, the Asus must know the public IP address of the 2Wire, so I set up the Asus to assign the 2Wire WAN address to the Asus WAN port.
I have several services on my 10.10.49.x subdomain that I want to access from the Internet. They include an OpenVPN server at 10.10.49.11 listening on port 443.
How do I forward requests on the 2Wire's port 443 to the OpenVPN server (at 10.10.49.11) behind my Asus router?
Solved by: Go to Solution.
01-20-2016 8:09 AM
Check this forum post out. It may help.
- edited 10-27-2017 12:50 PM by davidbk
Here are the exact steps I followed:
last modified: 2015-11-16 17:54:10
How do I configure bridge mode (DMZ+) on a 2Wire 3600HGV, 3800HGV, or 3801HGV?
There is no true bridge mode on the 2Wire routers. However, you can still configure it such that almost all functions of your own router will work properly.
Your router should now be able to route as if the 2Wire was a straight bridge, for the most part.
Inbound port 22 might be blocked, and inbound ports 8000-8015 might also be blocked, and there's nothing that can be done about it.
Credit for this post goes to SomeJoe7777
Visit these related resourcesView New Device Help!