02-23-2014 12:02 AM
I've been reading threads on similar topics, but they are mostly over my head...lol. My son began having problems with his NAT settings on his X Box 360 recently, and I only realized after I started researching this that it's probably because he got an X Box One for Christmas and has both set up on our network. He just thinks our router is crap and keeps threatening to throw it through a wall. Suffice it to say that we are both clueless about the mysteries of network and router settings. We have a Pace 3801hgv. Please, dumb down your instructions to a very basic level for me on how to fix this issue and bring peace between my son and our router. Thanks!
Solved! Go to Solution.
02-23-2014 2:11 AM
02-23-2014 5:03 PM
OK, I felt a breeze as that flew right over my head...lol. Seriously though, please forgive my ignorance, but would it be possible to give me very basic, specific instructions? Is there a particular model router I should look at? Where would I connect it? The gateway is in my living room and the X Boxes are operated wirelessly from a bedroom...I swear I'm not stupid, I just have very little experience with routers and network settings. Thanks again...
02-23-2014 7:54 PM - edited 02-23-2014 7:55 PM
I apologize. I'll explain what NAT and UPnP are and why they're important (in basic terms, which may not be fully accurate, but it gives you an idea of what's going on), this is for your understanding and benefit. (Though, if you'd rather not read it you can skip to Acquiring a router.)
NAT - Network Address Translation (More specific example for our use)
NAT is, in a way, the method by which multiple devices on your network can connect to the internet using one public IP address. On the internet, only your public IP address identifies your network. When you want to visit a website, the request goes out a random port from your computer to your router (ex port 23273), your router then forwards the request through it's own port (ex port 80), the request is routed through your ISP to the designated server, the server receives your request via it's own port (ex port 80), acknowleges the request and relays data back to your router. Your router receives a packet on port 23273 from the website, your router then has to route the data back to your own computer, through that port. When NAT is open, any device on the internet can send packets to your router's port 23273, and it will go to your device. NAT-open is optimal for Xbox Live, because multiple devices will want to connect to your Xbox during multiplayer gaming. (Xbox can make-up for NAT-moderate devices if the other Xboxes are NAT-open.) NAT-Moderate will only let the request come from tbe same host but any port. NAT-Strict will only let the requests coming from an IP address with the required port.
Examples: Think of your computer as a business. The host sends their employee's to go find guests. NAT-Open as the main enterance to a business. Anyone is able to come in and go out, no invitation needed. NAT-Moderate is the employee's lounge. Any employee's with an employee ID can go in. NAT-Strict is the Restricted Area - Only the ID matching the Restricted Area's Access ID can go in.
UPnP - Universal Plug-n-Play
UPnP is a technology standard that will allow a device (in this case, the Xbox) to connect to a network and make itself known to other devices. (Think of your Xbox as being at a party where people are wearing name-tags.) This is important because by default, Xbox uses the same ports across every Xbox. Since the ports are being used by one Xbox, the other Xbox can't use them. NAT-open allows the devices within the Network to use UPnP to open ports. When UPnP is enabled, one Xbox see's the other using those ports and determines that it can use other ports. NAT-moderate means that certain ports are open, but devices can't use UPnP to open any other ports. NAT-strict has no statically open ports.
Acquiring a Third Party Router
If you choose to go this route, plenty third-party routers have UPnP. I personally have had experience with the D-Link 615 (You may be able to find this one for <$25), D-Link 655 (This one was the one I used the longest, I loved it. ~$70), Netgear Range Plus WNR1000 (This one features a Lifetime Warranty ~$25), Netgear WNR2500, and the Netgear WNR3500L (Unfortunately this one fell off a shelf the first week, while I had it it was terrific. ~$50 Also features Lifetime Warranty). A benefit to all of these is that they're Wireless N devices. (N150-N300 - this means that they can reach higher maximum speeds when communicating with other devices on your network, than your RG.)
Once you've acquired your third party router, follow the "Getting Started" Instructions to connect the router to your computer. (For configuration.) These intructions come from the post I linked earlier, but I've changed some of the wording.
(You'll have to connect the X-boxes to the Wireless Router, and it's a good idea to disable the Wireless function on your RG.)
02-23-2014 8:46 PM
Thank you! Starting to make more sense...to clarify: Will I be able to connect the X Boxes wirelessly to the router? And, do you mean disable the wireless function of the RG forever? Would I then have to run all my wireless equipment (tablets, laptops, cell phones, wireless uverse receiver) through the new router?
02-23-2014 9:29 PM - edited 02-23-2014 9:39 PM
Yes, the Xboxes could be connected wirelessly to the router. Wireless N routers normally have better range than Wireless G routers, and allow for faster maximum speeds (within the local area network), so it would likely benefit your other wireless equipment.
The U-Verse Wireless Receiver doesn't rely on your RG's wireless function, it instead relies on the 5GHz Access Point that is connected to your RG.
Having two different Wi-Fi networks operating so closely together may cause unnecessary interference, so it's a good idea to explore the option of disabling the Wireless function of your RG if you're getting poor performance from your third-party router. Regardless, if you should keep both networks enabled, the one of the routers may require a change in channel. (I believe the RG will automatically attempt to adjust to the best available channel.)
03-02-2014 11:58 AM
03-11-2014 7:31 PM
OK...good and bad news...I bought the DIR 655 and set it up yesterday. I used an ethernet cable and my laptop to configure the gateway and the router. Followed all the instructions, and disabled the wireless fuction on the gateway. Then, I unplugged the cable from my laptop and tried to connect it wirelessly...not happening. I've tried everything I can think of to get it to work, but nothing is working. I've successfully gotten 2 tablets and my cell phone set up wirelessly, and my son has set up both X Boxes wirelessly. Today, he turned on the X Box One and the NAT type was set to strict. He hasn't had any problems playing a game yet, but...?
So, what am I missing? Any idea why my laptop won't connect wirelessly? Any reason why the X Box would still go to strict?
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!