Contributor
•
1 Message
nvg589 broadband 1 flashing red light
U-Verse service was installed Oct. 19th 2013 and had a good connection until last night. NVG589 broadband 1 is not linking to siginal. Has had a red flashing light on it since around 10pm last night. Need help.
Accepted Solution
Official Solution
ATTU-verseCare
Community Support
•
6.7K Messages
8 years ago
Gateway Reset and Troubleshooting
Fix Blinking Red Broadband Issues
The fastest way to get back in service and get rid of the blinking red broadband light is to perform one or all of the following:
Restart the modem
Secure cable connections
Factory Reset the modem (Last)
Also, please be wary of any change that may have occurred around the time service dropped like: adding new equipment, storms, power loss or something out of the ordinary.
Troubleshoot and check for outages
To check for an outage, visit our Service Outage Page.
To troubleshoot, visit our Internet Support Page. If you are signed in, a check will be performed automatically.
Thanks,
ATTJohnCS, AT&T Community Specialist
5 Attachments
envelope.png
myattlogo.JPG
gateway.JPG.png
vdslcable2.png.jpg
globe.png
(edited)
0
0
MorganCS
Former Employee
•
549 Messages
10 years ago
Hello Malcolm x,
My name is Morgan, I'm one of the U-verse Community Specialists. I'm very sorry to hear that your U-verse service suddenly dropped but, I was able to locate your U-verse account and I noticed that you have a U-verse technician appointment scheduled for later today. I'm confident he will be able to help you get your service back online. Feel free to let us know how everything goes after the technician completes the work. Thank you!
0
0
MorganCS
Former Employee
•
549 Messages
10 years ago
Hey Malcolm,
Just wanted to check back with you. I noticed the technician was able to get your service back online! Have you noticed any disconnects since the technician left? Feel free to let us know if you need any additional assistance and we'll be glad to help. Thank you!
0
0
ggena32
Contributor
•
2 Messages
10 years ago
Hello,
Why does the red light flashing mean. I had new service installed Saturday and this morning, the service to my TV didn't work. So I read the directions from the TV. Then noticed the red flashing light. I unplugged it, waited for 10 seconds, and then plugged it back in. Seems to be working now... But why exactly does this happen. Anyone know? I will be working from home in the sometimes and do not want problem with my internet service.
Gena
0
0
DavidCS
Community Support
•
1.7K Messages
10 years ago
Hi ggena32,
I apologize about the inconveniences, but I will be glad to look into that for you further. Depedning on what light was blinking red, there may not have been a major issue at all.
If the Power light was blinking red, it may be an issue with the modem, or just a simple power surge that caused it.
If the Broadband light was blinking red, that means physical connection to our network, and it could be anything from a bad modem, wiring issue, or outage.
If the Service light was blinking red, it means it could no longer authenticate a connection with our server, and that could just be an outage or an issue with the equipment.
Also, I will be sending you a private message to get more information from you, so I can run some line tests to make sure everything is alright, so be on the lookout for it.
-David T
0
0
paisan2u
Contributor
•
1 Message
10 years ago
I now have a flashing red light on Broadband 1. My internet is working, tv and computer, but the wireless connection to my printer is not working and will not print.
0
0
Anonymous
New Member
•
25.7K Messages
10 years ago
Currently going thru the same situation, my nvg589 is blinking red on the broadband2 light, this issue has been on going for some time, a tech was here last week and swapped out my gateway and found an issue at the NODE and said they needed a line team to come out and repair my 2nd line, I went out of town and came home yesterday only to still see a blinking red light. I see no open service ticket on file either. The worst part about all of this is the hassle of calling in for and scheduling repair. In this day and age of hi-tech, they should KNOW my gateway is sending an error code and repair on their end. Frustrated and about ready to abort uverse after 4+ fairly good years. I hate calling in for service, the automated menu is very hideous.
0
FlowerPower1234
Tutor
•
2 Messages
9 years ago
Same here. I know it's the service that keeps dropping but when you call in for service (I HATE that as well), the Tech that comes out always pretends it's something else so AT&T doesn't look bad. They can't keep the service going. THAT is the problem.
0
mibrnsurg
Expert
•
20.4K Messages
9 years ago
Click the ATT Uverse Care link in my signature, send the PM, explain your red light flashing situation.
Include your account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply. Good luck 😉
Chris
__________________________________________________________
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
0
0
Anonymous
New Member
•
25.7K Messages
9 years ago
Here is how I FINALLY fixed mine: after making numerous calls the to "service" line and waiting months for them to come run a new underground line which was supposed to be the end all cure all, I STILL had the same flashing broadband 2 light , so I in the towel, got rid of uverse tv and went to the lowest speed internet att offers, DIRECTV gets my TV $ money now and all is good. Appears the dual band technology is too new or too hard for the techs to get working correctly, life is too short to fight stuff like this I would however like to thank att uverse tech SadathCS for trying to go above and beyond to solve my issues, we exchanged many an email and he was professional and courteous in every one of them. Ciao!
0
0