12-03-2012 8:42 PM
I have had the same 2wire modem/router for 5 years or so. I have always had a steady, reliable, wireless internet connection. Then, I decided to buy a new computer, and wound up getting a Dell 660s with Windows 8. While the loading of webpages and buffering of videos increased greatly with the faster computer, my wireless connection to the 2wire is now unstable. Randomly, when I launch a browser or new web page, I get an error message from the 2wire that the gateway doesn't have a internet connection. If I wait 20-30 seconds, and try again, it connects fine.
I spent an hour on-line with Dell, re-installed the drives for the wireless card, with no results. They said everything looked fine with the computer.
Since I have two 5 year old XP based machines hooked to the gateway ( one with a Cat 5 cable, and the other thru a wireless card) it has never had a problem, I am leaning toward a problem with Windows 8.
04-11-2013 12:42 AM
I feel the pain, and thus I'm posting what worked for me. Let me preface this by saying that I have an older modem, 2Wire 2700hg-b. About 3 days ago, I purchased a new laptop with Windows 8 and was having the same issues expressed before: Internet Explorer/Chrome would unexpectedly lose connectivity wirelessly, and within 10-20 seconds regain connectivity and alow me to browse as before. This would consistently happen at least once every 10-15 minutes and was very frustrating. Well, I tried just about everything and decided to call customer service before buying a new modem; I'm so glad I made the call, thanks Perry! Here's what we did:
1) Went into the Modem System Summary and selected Firewall -> Advanced Settings which prompted the system password.
2) Under Attack Detection, un-checked Packet Flood (SYN/UDP/ICMP/Other)
3) Then, went to Home Network -> Wireless Settings
4) Under Additional Settings (defaults recommended), changed Wireless Mode: 802.11b
& Power Settings: 10
05-26-2013 11:58 AM
I spent almost 30 minutes on the phone w an ATT wifi support person; she could not help me solve the problem, although she did put me on hold to consult someone else. She asked if she could call me back in an hour. I waited almost 2 hours for her callback, which I never got. Wow....talk about FAILED customer service.
Anyway....I took matters into my own hands, since I have both a new Windows 8 desktop and laptop, as well as a laptop that uses Windows Vista. All other devices connect to the wifi internet - my iPhone, my Kindle, etc. It was just the COMPUTERS that would not connect via wifi. The desktop connected to the internet via ethernet cable (I was tired of fooling around with it and needed the internet). After trying to remove/add networks, add the MAC addresses, blah...blah...blah....I decided to just go into the modem itself and DISABLE ALL MAC FILTERING.
BINGO.....PROBLEM SOLVED. And I did this via the desktop's ethernet cable connection to the gateway; you will HAVE to use this type of connection if you cannot connect via the wifi, until you make this change on your gateway.
If you don't know how to do this, here is a step-by-step instructional list:
GOOD LUCK....I hope this helps at least ONE very frustrated person, like I was.
06-21-2013 9:53 PM
07-07-2013 1:57 PM
i have ALL my 4 computers hard wired into the AT&T DSL 2wire thingy and windows 8 takes it down...we just have to wait till some important Customer runs into this problem and then it will be resolved...microsoft and at&t need to get together and send techs to one of our sites that are failing to see for themselves, hook up their monitoring tools and fix the darn problem...in the meantime, it is back to windows XP, windows 7 and Ubuntu for me...i just use the windows 8 box for disk storage right now...some day it will be resolved...but till then, they will keep thinking anyone who says they encounter this problem is crazy...
crazy in illinois
09-14-2013 10:52 AM
Everyone - I have recently purchased an HP Envy 700 that came with Windows 8 and internet explorer 10. I also have a 2Wire 2700HG-B router/gateway (the version prior to the 27101 HG-B) which has performed flawlessly, for over 7 years, until now [with equipment running Windows Me, Win XP, Win Vista, Mac Os]. I noticed that the 2Wire router gateway DSL connection would drop (& by the same token drop the internet connection) rather regularly using Windows 8, especially after the system was trying to obtain new data on various web pages, and then would eventually reconnect on its own. This resulted in rather poor browsing performance. I was not experiencing similar issues with my other non-windows 8 machines.
After reading several blogs and recommendations from other users, I tested changes to the 2Wire gateway configuration (e.g. changing the wireless configuration mode [from multimode b/g, to single mode g or b], changing the communication channels, changing the power settings - tried various combinations, still to no avail).
The HP 700 came with Ralink RT3290 802.11 bgn wifi adapter. I thought that perhaps the issue may be the wifi adapter, and proceeded to disconnect the Ralink RT3290, and install a spare Linksys wireless G adapter (WUSB54GC) I happen to have from an older machine. Unfortunately, that did not change things either, i.e. I would still see the 2Wire DSL/Internet connection disconnect & reconnect while browsing.
I decided to stop by my local Best Buy to see what type of modem/routers they would have available. (The choices were a Motorola modem [no router], an ActionTec [modem & router], and an ATT/Pace 4111N - [802.11 N modem & router]). The ATT/Pace equipment was about $30 more than the ActionTec, and I took the plundge as I have been happy with my older 2Wire modem/router (until now). Note: none of the product descriptions state that either of the DSL modems have been tested with windows 8 (they just have minimum system recommendations of Win7, XP, Vista only).
I installed the Pace 4111N, and thus far, after a week of testing, have not encountered anymore DSL disconnects with my new machine running Windows 8/Internet Explorer 10, and the Ralink RT3290 wifi adapter.
I am not sure if my solution (replacing the 2Wire 2700 HG-B by a Pace 4111N) will work for others, but it has for me. Hope this helps someone who has been frustrated by this odd problem...
12-07-2013 9:43 AM
By disabling MAC address filtering in the 2Wire Gateway I was able to browse the internet without constantly being disconnected, or having a very slow connection. Thank you so much for helping with this as I was about at wits end!
Again, if you are having trouble, try disabling MAC address filtering.
01-07-2014 10:37 AM
Sorry if this is a stupid question but I am not a techy. Would disabling the MAC filtering affect the 2WIRE's ability to work with Apple devices such computers, iPads, iPods and phones?
04-01-2014 9:40 AM
We recently were given a new gateway box NVG589 - we have a wired connection. Since that happened it akes at least 10 minutes for our new HP Pavillion, running Windows 8.1, to connect to the internet. During that 10 minute period it flips from ethernet connect OK to not connected. After talking to both ATT and HP, we have yet to come up with a solution. Prior to getting the new gateway - we had absolutely NO PROBLEMS with connecting and our other PC still running Windows XP connects to the internet immediately. I did post this issue on the Microsoft community and a tech got back to me saying to try boot in safe mode and then if the issue does not persist boot in clean boot and see if that helps - haven't tried this solution yet...but I don't think a new gateway will help you and it really does seem that there is a problem between ATT and Wincows 8 and/or 8/1
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
Do you have questions about Internet and Email Security? Have them answered on Wednesday, April 26th at our Knowledge Sharing Session: Hack Attack!