Tutor
•
11 Messages
Signal explanation please.
I was having all sorts of problems with u-verse until they put a new "card" in at the v-rad. I'm told it had cross battery and needed to be replaced. Since then I have got this new green segment on the far left. Can anyone tell me why it wasn't there before and it's there now? I'm on the same profile as far as I know.
Accepted Solution
Official Solution
SomeJoe7777
Expert
•
9.4K Messages
11 years ago
0
0
Anonymous
New Member
•
25.7K Messages
11 years ago
0
0
afkouns
Tutor
•
11 Messages
11 years ago
Thanks for getting back to me. I'm just confused why it wasn't there and now it is. Seems odd.
2 Attachments
Stats-2013-02-09-13-43-40.png
Stats-2013-02-09-13-43-40.png
0
0
Anonymous
New Member
•
25.7K Messages
11 years ago
0
0
Anonymous
New Member
•
25.7K Messages
11 years ago
That could be why you are seeing the odd stats, and the US0 in use is what the last part is stating, that it is showing Upstream 0. Pair bonding is my thought on your hookup, but not really clear at this point.
0
0
afkouns
Tutor
•
11 Messages
11 years ago
I also hit "S" and it does nothing.
0
0
SomeJoe7777
Expert
•
9.4K Messages
11 years ago
In your case, there is not enough available bandwidth in the US1 band, so the RG and VRAD have negotiated to add additional bandwidth in the US0 band (32 - 128 kHz).
This is unusual for a non-pair-bonded installation, and especially unusual for being as close to the VRAD as you are (1000'). This is an indicator that something is wrong with the line, possibly interference or bridge tap.
You may want to call technical support, have them run a line test, and then send out a technician if their test shows problems.
0
0
afkouns
Tutor
•
11 Messages
11 years ago
I forgot to add I'm on a 24 down 3 meg up connection.
0
0
SomeJoe7777
Expert
•
9.4K Messages
11 years ago
0
0
afkouns
Tutor
•
11 Messages
11 years ago
I called tier 2 tonight to have them run tests on the line. I was told that I'm not on a bonded pair. There are zero errors upstream or downstream. I had the tech run a Realtime LPA and it came back solid green with zero errors as well.
I guess besides the addition of the green segment at the lower frequency that the only noticeable addition is that it says "USO in Use" where as before it didn't. I don't know what "USO in Use" means as well as the Upstream 0, so I thought I'd ask to find out more and be more knowledgable about my setup.
0
0