02-09-2013 10:56 AM
I was having all sorts of problems with u-verse until they put a new "card" in at the v-rad. I'm told it had cross battery and needed to be replaced. Since then I have got this new green segment on the far left. Can anyone tell me why it wasn't there before and it's there now? I'm on the same profile as far as I know.
Solved by: Go to Solution.
02-09-2013 1:39 PM
02-09-2013 1:56 PM
02-09-2013 2:05 PM
02-10-2013 12:28 AM
02-10-2013 1:33 AM - edited 02-10-2013 1:35 AM
02-10-2013 6:28 PM
I called tier 2 tonight to have them run tests on the line. I was told that I'm not on a bonded pair. There are zero errors upstream or downstream. I had the tech run a Realtime LPA and it came back solid green with zero errors as well.
I guess besides the addition of the green segment at the lower frequency that the only noticeable addition is that it says "USO in Use" where as before it didn't. I don't know what "USO in Use" means as well as the Upstream 0, so I thought I'd ask to find out more and be more knowledgable about my setup.
02-11-2013 6:16 AM
02-11-2013 8:35 AM - edited 02-11-2013 8:37 AM
Why would I not have two upstreams before, but I do now? Would them just replacing the card do that? I mean what or who decides to do that for me?
Here's my previous bitloading graph just before the new card install.
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
For DSL related issues. We highly recommend chatting with our teams to address this as quickly as possible.