Contributor
•
2 Messages
Router NVG510 issues. Please help
Been a customer for a while and overall satisfied. Tonight my router quit. I was updating the kids game on the xbox which is a wired connection and it didn't work. I unplugged the router for 5-10 minutes and plugged it back in. Now all the lights flash red. I have read that this means POST failure. How do I fix this fast as possible? Thanks
hjforyou
Tutor
•
6 Messages
10 years ago
what router are you use ?
0
0
rtk3
Contributor
•
2 Messages
10 years ago
Yeah, what exactly does this mean?
Thank you!
0
0
Jwhite43
Contributor
•
2 Messages
10 years ago
0
0
GBrown102
Contributor
•
1 Message
8 years ago
I repaced a router back in June of 2016---I had Arlo security cameras hooked to the old router that worked fine. After the router was replaced I couldn't reconnect to the arlo base. After trouble shooting with Arlo they said I need to have my provider review the security settings before and after the replacement? I have reset--re-synced-powered off--to no avail. I'm hoping you can help me fix this issue.
Gary Brown
garybrown102@bellsouth.net
502-420-8046----c
0
0
michael1964
Tutor
•
5 Messages
7 years ago
Gary, it depends on how you are trying to view your cameras - is it via your LAN or from a remote location via the Internet?
If you can view a connected device list, on your router and you can identify the IP address of the cameras, enter the IP address into a browser and see if you can see the interface you would expect to see.
If your problem is viewing remotely, it could be that you need to open some ports on your router to the cameras. You would have to know the port numbers and the internal IP or mac address of the cameras to do that.
Either way, you are going to have to have some information first so that you can identify the cameras on the network. Did Arlo talk you through how to check that you could communicate with and identify the cameras? "Security settings" has the smell of something you'd find in a cow field to me...
0
0
reese096
Contributor
•
1 Message
5 years ago
Recently I have also faced a similar issue I unable to connect my router on the computer. Because of the connectivity issue. trying to fix it but I noticed my cisco router not working properly. Then I visit https://www.routertechnicalsupportnumbers.com/blog/fix-cisco-router-not-working/. From here I got the proper solution. I hope you also get that.
0
0