Port forwarding with router

Master

Port forwarding with router

I finally got my router (E3000) to do the routing insted of my RG. Now I am unable to get certain ports unblocked (like 80, 10000 for webmin, etc.) I set up the router on DMZ Plus mode. I have read that AT&T blocks some ports.

 

Is there any work-around for this? I was thinking of calling in anad asking them to unblock or I will leave as I need these ports to be unblocked..

Message 1 of 9 (4,018 Views)
Highlighted
Expert
Solution
Accepted by topic author kareem9nba
‎09-30-2015 1:39 AM

Re: Port forwarding with router

If you have your router in DMZ mode, the following ports are blocked by AT&T:

Inbound

• Ports 8000-8015

• (If you are using wireless STBs) Port 443

 

Outbound

• Port 25 (unblockable on request)

 

No other ports are blocked.  If you can't communicate, you haven't configured your router correctly.

 

Message 2 of 9 (4,001 Views)
Master
Solution
Accepted by topic author kareem9nba
‎09-30-2015 1:39 AM

Re: Port forwarding with router

Thanks.

It actually wasn't the router, but the RG. Forgot to remove the ports on the RG so when we added them to the router, they wouldn't work. Once those were removed from the RG, the router worked perfectly.
Message 3 of 9 (3,988 Views)
Mentor

Re: Port forwarding with router

SomeJoe, do you have any idea if the usurpation of those inbound ports applies also to static IP addresses ("User Defined Supplemental Networks")? I can't think of any reason why it should apply beyond the main IP, but that doesn't count for much.
Message 4 of 9 (3,966 Views)
Expert

Re: Port forwarding with router

No inbound ports should be blocked on purchased static IPs.

The outbound port 25 might still be blocked, but can be unblocked on request.
Message 5 of 9 (3,958 Views)
Master

Re: Port forwarding with router

My internet seems a whole lot slower after having the router do the routing. YouTube vids start buffering very fast and then slow down and even stall at times (same with Vimeo, Netflix, etc.) When I do a speedtest, I got a third of what I should be getting.


Could the routing be the issue?

Message 6 of 9 (3,899 Views)
Expert

Re: Port forwarding with router

If your router is working properly and configured properly, you should not see any slowdown.
Message 7 of 9 (3,887 Views)

Re: Port forwarding with router

So I can use a higher port # and its not blocked?
I did a port scan and I have no open ports!
I have the E3500 Router and I've been trying to do port forwarding for days no success!
If some could explain how this is done with my router please!
Message 8 of 9 (1,503 Views)
Contributor

Re: Port forwarding with router

Joe I got a question I setup port forwarding on my router everything worked fine, now all of a sudden the port forwarding only forwards for a single connection, when one client connects it all of sudden stops working and no longer forwards any packets what setting helps or may fix this problem!

 

Thanks

SR

Message 9 of 9 (315 Views)
Share this topic
Announcements

Welcome to the AT&T Community Forums!!! Stop by the Community How-To section for tips on how to get started.