- edited 09-02-2011 11:50 PM
Hoping to catch SomeJoe's attention... Apologize in advance if these pic's don't come out right, first post.
As I understand the documentation, this is a very noisy line... Remarkably, I'm still pulling 11.5 ish down and 1 up on speedtest.net
What if anything should I look into as far as correcting things?
2nd question on the Channels / Streams tab: I'm running a config as referanced in your section 3, router behind gateway. I have a Dlink DGL-4500 "gaming" router, capable of some limited multicast routing. Just wondering if there's anything that can be done so that I can have my cake and eat it too (see the STB's even though I have a router between my PC and the gateway)... With the capabilities of this router, I would think I should be able to get it working...
Solved by: Go to Solution.
10-02-2011 8:47 PM
10-10-2011 12:35 PM
My wife called me this morning to tell me that the TV and Phones are working, but that the internet is not.
When I get home from work, I'll investigate, in the mean time, does anyone know of any outages or localized problems in the St. Louis Area?
10-11-2011 6:03 PM
we had a vrad port go out - they fixed everyone and my stats went from 38K (32/5 profile 2200ft) to 45K (32/5 profile 2100ft) - same wires. i was barely on 32/5 and now i have 87% (before as high as 110% overallocated) 3801 was the only way to get 32/5 profile the 3800 couldn't do it back then.
10-12-2011 6:35 PM
Sorry for the delay'd response. By the time I got home, internet was working again. I checked all the router stats with UVRealtime but nothing showed up. In fact the error table was only showing about 2k corrected blocks.
I have no idea what happened.
Keeping an eye on things.
12-19-2012 1:58 AM
Somejoe : Power Level" power level @ the house ? or Power level from the Vrad?
My Noise Margin and attenuation can be improve right?
It's only 15 foot of cat5 running to the router: thanks for checking it outl
12-19-2012 10:36 PM