10-11-2013 3:17 PM
Hardware Version 2700-100531-006
Software Version 184.108.40.206-plus.tm
I will try to keep this short. I am not having problems with internet access. I am running windows 7 on laptop until today I could connect to my NAS which is hardwired to the RG. Today I could not see any other devices on my network when connecting wirelessly. Use a network cable everything is working. Do all of the usual stuff to fix problem. Restart everything did not work. Rolled back to earlier in week because there had been a lot of updates, did not work. I then went to the home page of the RG and noticed it looked different. That is when I figured out the firmware had been updated to 220.127.116.11-plus.tm. When connecting wireless I cannot ping anything on the network other than the RG. I decided that the new firmware broke the wireless to ethernet bridge in the router. To see if this is the case I setup a new wireless access point and connected it to the RG. I set the AP up as DHCP forwarder so the RG would assign IP address. When I make a connection this new AP the RG assigns my laptop an IP address and I can connect to the NAS. When I check the RG it shows my laptop as an Ethernet connection as expected ( it is not aware of the AP). I can ping any other device on the network. So based on this I think the new firmware breaks the wireless to Ethernet bridge or perhaps it isolates the wireless from the Ethernet. Like I said I could connect with the internet without problem. Tried to call support, what a waste of time. They wanted to charge me for some 3rd party support. For now I will leave the new AP on. I may eventually turn off the RG radio and replace the AP with a wireless N version as soon as I figure out which would be best using DD-WRT.
Solved! Go to Solution.
10-11-2013 4:37 PM
10-12-2013 8:52 AM
I will give this a try. I have not tired it to this point because I will need to copy my firewall rules and i did not know how long it will take the RG to reprovision. During that time I will lose my non Uverse IP phone service. I will try it today.
10-12-2013 11:25 AM
I did the reset. I can now see my entire network from a wireless connection to the RG. The only thing I forgot to backup before the reset was my list of MAC address for MAC filtering. I have a new public IP so I need to make some changes to my VPN settings. Thanks for the suggestion.
10-16-2013 7:33 PM
I am pretty sure I am having similar problems. Until recently, I have been able to back up a WD My Book Live (via Mac) and Sonos (sound system) connected to my RG. All of a sudden, nothing is able to be found. Same for me my internet works, all devices can connect to RG but these 'extended' items are no longer findable.
I attempted selecting the link you provided to set to factory default but it would not come up. Any other suggestions on how to all my RG to allow these devices to be recognized??
Please help and thanks!
10-16-2013 7:46 PM
12-13-2013 9:02 AM
Hello, I too am having problems with my SONOS system now not working. I am not a very technical person so can you tell me what I need to do to reset, or prior to resetting? I don't want to reset and not be able to connect to my wireless network etc, i.e. passwords and stuff.
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
For DSL related issues. We highly recommend chatting with our teams to address this as quickly as possible.
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!