Motorola VAP2500

Contributor

Motorola VAP2500

Hi 

    I have the  motorola vap 2500 wireless access point  from ATT.  I found that it does have a web configuration interface. But I do not know the login and password. I have tried  all the userid/password combinations out there in the web for motorola devices.  But nothing has worked. Thinking of using hydra at this point.

   Btw, I did reset the device as well.

 

If anybody has any knowledge of how to login to the Motorola VAP 2500,

 

Thanks

Satanand 

 

 

Message 1 of 21 (39,178 Views)

Re: Motorola VAP2500


satanand wrote:

Hi 

    I have the  motorola vap 2500 wireless access point  from ATT.  I found that it does have a web configuration interface. But I do not know the login and password. I have tried  all the userid/password combinations out there in the web for motorola devices.  But nothing has worked. Thinking of using hydra at this point.

   Btw, I did reset the device as well.

 

If anybody has any knowledge of how to login to the Motorola VAP 2500,

 

Thanks

Satanand 

 

 


 

 

As far as I know the VAP2500 is not a standard access point. It's supposed to be used with the Uverse wireless TV receivers, and should be preconfigured for that purpose.

 

I don't think there is an actual log in/user ID. If you are connected to your gateway via an Ethernet cable, you should be able to access the VAP2500 user interface by typing it's IP address into your browser. The password for making configuration changes should be printed on the VAP2500 somewhere.

 

 

 

 




__________________________________________________________
How can you be in two places at once, when your not anywhere at all?
------------------------------------------------------------------------------------------------------
I really want to become a procrastinator, but I keep putting it off.
------------------------------------------------------------------------------------------------------
There are three kinds of people, those that can count, and those that can't.
------------------------------------------------------------------------------------
“Our great democracies still tend to think that a stupid man is more likely to be honest than a clever man, and our politicians take advantage of this prejudice by pretending to be even more stupid than nature has made them." :Bertrand Russell

                              

Message 2 of 21 (39,009 Views)
ACE - Professor

Re: Motorola VAP2500

Try:

User: ATTadmin

Password: 2500!VAP

 

Worth a try... I guess :/.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: If your issue has been resolved, please mark the post that resolved your issue as the solution. Click "Post Options" and select "Accept as Solution" to help others with the same issue find an answer.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 3 of 21 (38,969 Views)
Contributor

Re: Motorola VAP2500

it is preconfigured. But I want to change the operating channels in 5 GHz.  It does have a web configuration interface.

 

and the userid and password are not printed on it.

 

Regards

satanand

Message 4 of 21 (38,642 Views)
Contributor

Re: Motorola VAP2500

Well thats the first one I tried. It does not work.

 

Regards

Satanand.

Message 5 of 21 (38,640 Views)
Tutor

Re: Motorola VAP2500 Login

I've also found that resetting the device does not work. I can't find anything online that has the correct default login info. I'm showing 2 wireless receivers connecting when I only have one. I'd like to block the 2nd device or even set mac filters or something for those.

Message 6 of 21 (37,533 Views)
Contributor

Re: Motorola VAP2500

Satanand - did you try Hydra? What did you find out?

Message 7 of 21 (37,493 Views)

Re: Motorola VAP2500

Normally I'm fairly caught up with different network tools, but I can't figure out what Hydra is for the life of me.  I know someone used to keep a public list of default passwords, but I can't remember that site either.

 

Also, I'm not sure if I should start a new thread or just stay here, but other than running a free wireless network scanner, does anyone know of a way to tell what the VAP2500 is using?  2.4ghz, and channel? 5ghz and channel?  Does it broadcast and ID?  I hate not having good documentation or access to the configuration.

 

Like many people I run a router behind the RG for GigE and 802.11n, and I like to know how my equipment is layed out.

 

Thanks for any info,

 

Jim

Message 8 of 21 (37,355 Views)
Highlighted
ACE - Expert

Re: Motorola VAP2500

It uses normal 802.11n channels in the 5 Ghz frequency space.  I'm sure it dynamically selects a channel based on conditions.

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 9 of 21 (37,353 Views)

Re: Motorola VAP2500

Thanks JefferMC, it's just too bad they don't provide the current information on the homepage the same as the RG.

Message 10 of 21 (37,348 Views)
ACE - Professor

Re: Motorola VAP2500

The VAP can be seen on inSSIDer. It used 5 GHz with 4x4 N(600 Mbps). It can use the newer 5 GHz channels from what I saw 52+58 and 108+112(Probably more, but I haven't had the chance to see it use more than those others).

 

It broadcasts with the network name "MotoVAP_xxxxxxxxxxxx"

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: If your issue has been resolved, please mark the post that resolved your issue as the solution. Click "Post Options" and select "Accept as Solution" to help others with the same issue find an answer.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 11 of 21 (37,299 Views)

Re: Motorola VAP2500

@Darknessrise, thanks for inSSIDer.  I've used netstumbler for years, and it is nice to have a new app to try.  

Message 12 of 21 (37,209 Views)
Tutor

Re: Motorola VAP2500 Login

I discovered, with some help, that the 2nd device connecting (the 2nd mac address that has its own ip and serves no purpose that I can see) is most likely a 2nd device on the 1 wireless receiver that only connects when using the receiver via the wireless access point. So, if you plug it in directly to the router, and not use the access point, it goes away. However, so far nobody has been able to explain to me what it is and what is does.
Message 13 of 21 (34,961 Views)

Re: Motorola VAP2500

What is the default log in address? For Netgear the router log in address is 192.168.0.1.
Message 14 of 21 (33,182 Views)
ACE - Expert

Re: Motorola VAP2500

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 15 of 21 (33,179 Views)