07-23-2014 5:35 AM
I recenlty added tv service back to my exsiting internet service. The tech moved me to the NVG589. He leftb the INID in place, not sure what he did to bypass the INID. I've had some picture freezing since the change. I am currently subscribed to max internet, and it seems as if my profile is 55/6.
So, looking at my stats, is it the profile thats causing the issue, or the INID to NVG589 conversion thats the issue. Depending on ther tech I ask I'm from 3900 to 4200 feet from the VRAD.
Thanks in advance.
07-23-2014 1:23 PM
I am sorry about the problems you are having with your TV picture after the change. The line test results you posted looked good. You do have a few errors, but if that is spread out over a day, it is not a huge problem, but if it occurred all in a 15 minute interval, that could indicate that there is an issue. Your SN Margin and Line attenuation look normal. It could possibly be an issue with the switch over to the NVG589. I will be happy to look further into this for you, and we will send you a private message to gather more information.
Need more help? Feel free to search the AT&T Community for great answers. You can also get immediate troubleshooting steps from the myAT&T app. Simply login, scroll and click Fix it Now! Support Tools. You can also reach out to our Chat Support 24/7.
07-23-2014 2:19 PM
Even 3900' is a long way from the VRAD to be on a 55 Mbps profile. You're using every bit of available bandwidth in line 1, and most of it on line 2, which is why 3900' is a long way away to have this profile. I think the nominal limit is around 2200' of distance.
However, since you moved off the iNID, your cabling for your TVs would be different, and that may be your problem. You're in good hands with DavidT, though; I'm sure he'll get you all straightened out.
07-25-2014 10:26 PM
Your distance is too great, the SN is too low and not enough max sync rate to support 55M profile.
This needs to be lowered by tier 2 support to 25M (12.5 per line)
All stats will vastly improve as well as service experience.
The 25M profile can support up to Max Plus (18), one step higher than current Max (12).
Conclusion lower profile to match your condition. The iNIDs were 25M originially, suspect a system change to profile at any time in past was not noticed till higher bandwidth of IPTV was being used.
07-26-2014 4:29 AM
Thanks to JefferMc for his insight also. My profile was lowered to the 32/5 profile and it seems to have cured the problem.
Here is my current stats:
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
For DSL related issues. We highly recommend chatting with our teams to address this as quickly as possible.