01-04-2013 12:16 AM
Every light is green and my internet service works fine except I can't connect wirelessly. The light has never come on. While my computer itself shows my wireless connection as being good, I can't connect using the wireless key located on the side of the Gateway. I've even tried changing my wireless security key instead of using the default key. Each time I try to connect, the failed connection warning comes on. I've been working on this for 2 days and can't figure it out. Any advice for me?
Solved! Go to Solution.
01-04-2013 5:41 AM
01-04-2013 10:07 AM
Hi. Thanks for answering.
I've tried doing the reset. It's the first thing I tried when I was troubleshooting. All the other lights go to green very quickly except the wireless. Since the local ethernet light blinks while I'm using the computer, I thought the wireless light would come on when I was trying to access the wireless but it doesn't do anything. I've tried our laptop and my son tried his smart phone wireless app but that wouldn't work. When I was DSL with AT&T, I had a Linksys router piggybacked on my old AT&T modem and it worked fine for wireless.
I have a HP Pavilion P6000 Series desktop with the model #p66544. The wireless Lan card is an 802.1 Ralink Technology, Corp.network adaptor. The Device manager shows it's working properly. The network 3 connection icon says the signal strength is good and has 4 green out of 5 signal strength bars. When I go connect, the connect automatically window comes up and I'm prompted to enter in the security key which I do. Then Windows was unable to connect to the 2Wire which leads to a troubleshooting window. It says to investigate router issues and advises me to turn off the router for 10 seconds which I've done. Yikers..it's driving me bonkers!!
01-04-2013 10:16 AM
01-04-2013 10:27 AM
Thank you for your advice. I'll try it and post back here whatever happens. Cross your fingers!
01-04-2013 11:13 AM
Here's the result:
I uninstalled the software and drivers for the wireless card. Windows updated the drivers and the Wireless Zero config is set to automatic and the service status is automatically on start. The wired autoconfig properties is set to automatic and the service status is automatically on start. On the wireless command settings in the cmd, it shows Auto configuration logic is enabled on interface. On the 2 Wire settings, the Wireless Interface says enabled and the Wireless Protected set-up says enabled. The SSID is enabled and the authentication type is Default: WPA-PSK (TKIP) and WPA2-PSK (AES).
Does this still sound like my wireless card isn't working properly? If so, I'll look for a new one.
Thanks for all your help.
01-04-2013 12:59 PM
01-04-2013 1:19 PM
It keeps asking for the wireless network key. Family members came over with laptops and netbooks which connect wirelessly in their homes and in internet cafes and tried to connect to no avail. Their notices say the network is locked and couldn't connect even though they tried the key password. My netbook and my daughter's laptop shows the 2wire network at 5 green bars signal strength but the notices also say it's locked. I tried redoing the network key to a more personal one but that didn't work either. Windows keeps trying to fix the router. Even with attempting to connect to the network, no green light for wireless even though the local ethernet, phone line 1, broadband and service lights are all green.
Forgive my ignorance about wireless cards but wouldn't the family member computers be able to connect if it was only a problem with my card? Could it still be a problem with the Gateway even with the other green lights working?
01-04-2013 3:30 PM
01-04-2013 6:12 PM
First of all, thank you so much for your help with this.
Because of your advice, I was able to troubleshoot and narrow it down to the RG. I used online support and after an hour or so, the tech was able to reset the wireless encryption key from their end and then the green light came on. My desktop, netbook and my daughter's laptop still wouldn't connect with the encryption key even though it showed the wireless was connected and working. I remembered your advice about the WLAN card and mentioned it to the tech but he said it wasn't that since other devices couldn't work either. The tech also couldn't figure out what else was wrong so I decided to try one last experiment. My son gave me an extra Cisco Linksys Adapter which I plugged into a USB port and Voila..instant wireless access using the security key. Everything is working now. YAY!
You really are an ACE.: I hope you have a good weekend!
01-05-2013 11:34 AM
It worked for an hour but then the wireless became unstable on the RG. It would work for 5 or 10 minutes and then shut down only to come back up half an hour later. It was hit and miss on my daughter's laptop and finally quit there also. While the techs did activate the wireless encryption key, other devices still won't work. It keeps saying the encryption key won't work on other devices. I talked with the techs on online support for hours and also troubleshooter until midnight last night at which time I threw up my hands in frustration. I'm asking for a new RG and see how that goes.
Darn it..This is so frustrating!
Welcome to the internet boards! Check out our troubleshooting articles below and don’t forget to search the forums - your question may have been answered already!
Service acting up? Click here to troubleshoot now!
For DSL related issues. We highly recommend chatting with our teams to address this as quickly as possible.
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!