Ask a question
Search in Internet Forums

Internet Forum

Reply
Posted Apr 1, 2014
9:50:52 PM
View profile
Connecting WAP via WPS, doesn't work with Gateway 3800

Trying to connect a Netgear wireless access point (WAP) to my ATT Gateway using WPS.  Went into Gateway settings and enabled WPS, tried to connect pushing WPS button on WAP then on Gateway.  Seemed to get short weak connection for a few seconds, then lost it.  Could using a different wireless channel help?

BTW, the WAP and Gateway were two feet apart when trying to do the cnnection!  Didn't cheap out on the WAP either.  Got a two antenna WNCE4004, which should not have any signal problems.

Trying to connect a Netgear wireless access point (WAP) to my ATT Gateway using WPS.  Went into Gateway settings and enabled WPS, tried to connect pushing WPS button on WAP then on Gateway.  Seemed to get short weak connection for a few seconds, then lost it.  Could using a different wireless channel help?

BTW, the WAP and Gateway were two feet apart when trying to do the cnnection!  Didn't cheap out on the WAP either.  Got a two antenna WNCE4004, which should not have any signal problems.

Connecting WAP via WPS, doesn't work with Gateway 3800

1,718 views
6 replies
(0) Me too
(0) Me too
Reply
View all replies
(6)
Highlighted
0
(0)
  • Rate this reply
View profile
Apr 3, 2014 8:26:29 AM
0
(0)
Employee

1. What is your purpose of net gear wap?  Replace att router or boost or other. 

1. What is your purpose of net gear wap?  Replace att router or boost or other. 

*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: Connecting WAP via WPS, doesn't work with Gateway 3800

2 of 7 (1,689 Views)
0
(0)
  • Rate this reply
View profile
Apr 9, 2014 10:22:41 AM
0
(0)
Contributor

I'm using the additional WAP to connect a TV and DVD, both internet ready but not wireless, to my ATT internet access wirelessly.

The WAP does have instructions to connect to the router without WPS, but I thought it would be easier to use WPS, since the 3800 does have that capability.

The non-WPS option requires me to connect the WAP to a computer's LAN input and configure there.  Due to location of the TV/DVD and my computers, I would need to power down the WAP after configuration, move it, then plug in and connect to TV/DVD in a different location.

I'm using the additional WAP to connect a TV and DVD, both internet ready but not wireless, to my ATT internet access wirelessly.

The WAP does have instructions to connect to the router without WPS, but I thought it would be easier to use WPS, since the 3800 does have that capability.

The non-WPS option requires me to connect the WAP to a computer's LAN input and configure there.  Due to location of the TV/DVD and my computers, I would need to power down the WAP after configuration, move it, then plug in and connect to TV/DVD in a different location.

Re: Connecting WAP via WPS, doesn't work with Gateway 3800

3 of 7 (1,661 Views)
0
(0)
  • Rate this reply
View profile
Apr 9, 2014 12:03:52 PM
0
(0)
ACE - Professor
Edited by Darknessrise on Apr 9, 2014 at 12:06:37 PM

Were you trying to say your Netgear repeater or bridge, not WAP? A WAP connects with an ethernet port to your gateway.

 

Edit: Opps, I see you mention the WNCE4004 which is a bridge.

 

Maybe try to make sure your gateway is using WPA2 passwords? I'm not really sure. If you did the WPS process/enabled it correctly and it's still not working, I would just try the manual setup.

-------------------------------------------------------------------------------------------------------------------- Note: If your issue has been resolved, please mark the post that resolved your issue as the solution. Click "Post Options" and select "Accept as Solution" to help others with the same issue find an answer.

Were you trying to say your Netgear repeater or bridge, not WAP? A WAP connects with an ethernet port to your gateway.

 

Edit: Opps, I see you mention the WNCE4004 which is a bridge.

 

Maybe try to make sure your gateway is using WPA2 passwords? I'm not really sure. If you did the WPS process/enabled it correctly and it's still not working, I would just try the manual setup.

-------------------------------------------------------------------------------------------------------------------- Note: If your issue has been resolved, please mark the post that resolved your issue as the solution. Click "Post Options" and select "Accept as Solution" to help others with the same issue find an answer.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Connecting WAP via WPS, doesn't work with Gateway 3800

[ Edited ]
4 of 7 (1,654 Views)
0
(0)
  • Rate this reply
View profile
Apr 22, 2014 5:12:26 PM
0
(0)
Contributor

I did try the manual setup, but that didn't work, either.  I've got 2 phones, three computers, and a tablet all using my wireless router, NP, but this thing just won't connect.

Think I'll send it back to Netgear and try something else.

I did try the manual setup, but that didn't work, either.  I've got 2 phones, three computers, and a tablet all using my wireless router, NP, but this thing just won't connect.

Think I'll send it back to Netgear and try something else.

Re: Connecting WAP via WPS, doesn't work with Gateway 3800

5 of 7 (1,618 Views)
0
(0)
  • Rate this reply
View profile
Apr 22, 2014 7:07:21 PM
0
(0)
ACE - Expert
mschadec - Did you enable WPS in the 3800? Mine was disabled.
The 3800 GUI is - http://192.168.1.254/ click wireless - change Wi-Fi Protected Setup from disabled to enabled.
You can use the button on that page. You will need the Gui password.
mschadec - Did you enable WPS in the 3800? Mine was disabled.
The 3800 GUI is - http://192.168.1.254/ click wireless - change Wi-Fi Protected Setup from disabled to enabled.
You can use the button on that page. You will need the Gui password.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Connecting WAP via WPS, doesn't work with Gateway 3800

6 of 7 (1,611 Views)
0
(0)
  • Rate this reply
View profile
May 1, 2014 6:45:36 PM
0
(0)
Contributor

I did go into the 3800 configuration and enable WPS, still didn't work.  Then tried manual setup, accessing my router and using password.  I have a TV, DVD player, a printer, two laptops, two phones, and a tablet all using my ATT wireless access flawlessly.  This unit just doesn't seem to want to connect!

I did go into the 3800 configuration and enable WPS, still didn't work.  Then tried manual setup, accessing my router and using password.  I have a TV, DVD player, a printer, two laptops, two phones, and a tablet all using my ATT wireless access flawlessly.  This unit just doesn't seem to want to connect!

Re: Connecting WAP via WPS, doesn't work with Gateway 3800

7 of 7 (1,535 Views)
Share this post
Share this post