AT&T Community Forums

Can I change Device Access Code on NVG gateway?

Yes you can. Let’s make sure you are referring to the same password discussed below. The U-verse gateway will let you change the Device Access Code also labeled as System Password on other gateways. This is the password required after accessing the gateways interface and before settings can be changed or saved for your Wi-Fi network, Firewall, or other network information.

*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.

Still need help? Ask a question! Our 1.4 million members typically respond within 1 hour.

Responses

Accepted Solution

Official Solution

ATTU-verseCare

Community Support

•

6.7K Messages

8 years ago

To change System Password/ Device Access Code on 2Wire/Pace please go here

If you need to change the Wi-Fi name or Wi-Fi password (Network Key) please go here

To change Device Access Code on NVG follow the steps below

Find the label on the gateway that displays the current Device Access Code
Connect PC to NVG gateway using wired connection

Open a browser and type 192.168.1.254 then hit Enter

Go to the Device Tab and select Access Code from the submenu

Enter the Device Access Code you located earlier on the NVG gateway

Enter Current Device Access Code then enter New Device Access Code twice
Click Use New Access Code to save changes

If your New Access Code was accepted Changes Saved will be displayed

If your New Access Code was not accepted a message will be displayed with the requirements needed

by ATTU-verseCare

7 Attachments

ip6rd.jpg

sbswr1.png

acss1.png

acss2.png

acss3.png

acss4.png

acss6.png

0

preeglam1

Tutor

•

5 Messages

8 years ago

i just change my default router ip and after that i am unable to enter Device Access Code, which i never change. motorola NVG510

0

mibrnsurg

Expert

•

20.4K Messages

8 years ago

@preeglam1 wrote:

i just change my default router ip and after that i am unable to enter Device Access Code, which i never change. motorola NVG510

Why'd ya change the router IP address? Add a router behind the router? Leave RG alone and use 192.168.2.254 for the router. Smiley Surprised

Chris
__________________________________________________________

Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(billing and all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

0

cmolivares

Contributor

•

1 Message

7 years ago

How do I reset my security code for my ATT modem?

0

ATTU-verseCare

Can I change Device Access Code on NVG gateway?

ATTU-verseCare

preeglam1

mibrnsurg

cmolivares

Related Conversations

Did this help you?

Tags