10-30-2018 9:12 PM
I put my router behind the PACE gateway and set the router as DMZ. The latest firmware is crapping out my fiber connection where I'm only able to get 50mbps down and 1-200 up. I thought it was my router crapping out, but apparently when I connect any other device directly to the gateway, I'm able to pull 940mbps up and down. I swapped an older router and placed that device in the DMZ And it starts acting up and the previous router started working normally.
Can someone look into this?
Solved by: Go to Solution.
08-22-2019 5:43 AM
08-22-2019 4:34 PM
Confirmed 18.104.22.1682191-att... confirmed horrible performance. Speedtest fails or runs very strangely -_- Chromecast devices all had issues streaming for the first 24hrs. Couldn't stream Spotify via Google home. Signal couldn't send messages unless I switched to LTE. Random web pages won't load. Ugh I hate AT&T. I'm almost tempted to get Comcast at this point. I shouldn't have to buy my own BGW210 to get stable performance...
- edited 08-22-2019 4:48 PM
A BIG spike in the number of reports from Pace owners having issues with third party routers in the last couple of days. So it seems like AT&T started pushing 11.3 out again this week after it appeared that they were holding off because of all the complaints. Absolutely no idea why they're doing this. It's obvious that it breaks DMZ+ and AT&T just has to know this.
It will be interesting to see what happens to you guys who put 11.2 back on again. Maybe the FW push is automated/scheduled and it won't come looking for your gateway again for a while.
- edited 08-22-2019 5:59 PM
So it seems like AT&T started pushing 11.3 out again this week after it appeared that they were holding off because of all the complaints. Absolutely no idea why they're doing this. It's obvious that it breaks DMZ+ and AT&T just has to know this..
Repeat after me... They simply do... not..... (wait for it)............care.
As for me, I'm still on 10.7 and loving life. I think I will stay there for a while.
08-22-2019 6:28 PM
Undoubtedly, they will. And I will revert back just as soon as they do. I'm on disability, I will go back and forth with them all day every day. I got nothing but time on my hands... lol
08-23-2019 4:32 AM
Oh, the most annoying issue after losing the ability to use Chromecast is this latest update is causing my Google WiFi access points to randomly go offline. Thanks AT&T O_o
08-23-2019 6:25 AM
Seems like the only "fixes" are going to be:
1. Downgrade firmware every single time
2. Live with manually forwarding all TCP and UDP ports and the shenanigans with that
3. Pray that you get someone to send you a different modem
08-23-2019 6:34 AM
The replacement BGW210 is no picnic either. For those that use site to site VPNs it has stability issues with those too. After a week or so it starts randomly dropping some of the tunnels. I've disabled every possible "feature" of the router.
ATT needs to take a lesson from the competition and allow folks to manage their own edge devices easily. Their repeated use of band aids on top of ancient hardware on an otherwise reliable service just does not make sense to me. The phone tech support can only ever offer a "line test", "reboot", "connect directly to the modem to test", or get a tech with a varying level of experience to come out and swap modems. When I went through this last time, the phone tech had absolutely no clue what I was even talking about when I described symptoms. The onsite tech had no experience using DMZ+/Passthrough Mode other then to point me at a webpage and state that its the most often heard complaint are problems related to this feature in "advanced" home/home office setups.
08-23-2019 6:49 AM
The firmware is earlier in this thread but I know it's a long thread.
tonydi graciously posted it in the thread I created:
you need to go to your router's page and go to the hidden /upgrade path and upload that file. All the lights on your modem will turn off at some point and it will take much longer than you're comfortable waiting the first time but it should complete.
08-23-2019 7:46 AM
Downloads via DMZplus and my Asus router had throttled to 50 Mbps again and sure enough the Pace had been updated to 22.214.171.1242191.
Out of frustration, I chose to Factory Reset using the red button on the Pace this morning. After that finished, I reconfigured DMZplus. Now, I observe full speed downloads. I was surprised.
Visit these related resourcesView New Device Help!