2Wire 3600 Wi-Fi Gateway Lights
Learn about your 2Wire 3600 Wi-Fi Gateway lights
What do my Wi-Fi gateway status lights mean?
Every light on your 2Wire 3600 Wi-Fi gateway has a meaning. Learn what each light means and how to use them to troubleshoot network problems.
Learn more about all of our Wi-Fi Gateways & Equipment.
What do these 2Wire 3600 Wi-Fi Gateway lights mean?
| Status Light | State | Description |
| Power | Off | Power is off or gateway is not getting power. |
| Solid Green | The power is on. | |
| Flashing Red | Power-On Self-Test (POST) in progress. | |
| Solid Red | POST failed or gateway has malfunctioned. | |
| Local Ethernet | Off | There is no Ethernet connectivity or the gateway is off. |
| Solid Green | A computer or device is connected by Ethernet to the gateway. | |
| Flashing Green | There is activity from devices connected to an Ethernet port. The flickering of the light is synchronized to data traffic. | |
| Wireless | Off | No devices are connected wirelessly or the gateway is off. |
| Solid Green | A computer or other device is connected to the gateway using a wireless connection. | |
| Flashing Green | There is activity from devices connected using a wireless connection. The flickering of the light is synchronized to data traffic. | |
| Phone 1 and Phone 2 | Solid Green | Associated Voice Over IP (VoIP) line has been registered with a SIP proxy server. |
| Flashing Green | A telephone is off-hook on the associated VoIP line. | |
| Broadband | Off | No physical signal detected. |
| Solid Green | Broadband connection established via DSL or Ethernet. | |
| Flashing Green | Gateway is attempting to make a broadband connection. | |
| Solid Red | Gateway cannot make a broadband connection. | |
| Service | Off | Gateway is not on, is in bridged mode, or the broadband connection is not present. |
| Flashing Green | Data traffic is coming into or going out from the network. | |
| Solid Green | The RG is downloading service updates from the network. | |
| Flashing Red | Gateway is attempting IEEE 802.1X authentication or attempting to obtain Dynamic Host Configuration Protocol (DHCP) information. | |
| Solid Red | Gateway has failed to receive an IP address assignment from the network. |
New to the AT&T Community?
Start by visiting the
Community How-To.
New to the AT&T Community?
Visit the Community How-To.
Visit the Community How-To.