Yes, for the caller ID setup on the TV you will need to go to channel 9901. Select Voice Services. Then Caller ID Settings. To enable option for caller ID put a check on the phone number.
I do not have the option of Caller ID in tv. I can only see the first four lines. What do I do next? also channel 9901 says channel not available. Went thru menu and set up Caller ID. it is set ON. still no caller ID.
Accepted Solution
Official Solution
SadathCS
Employee
•
581 Messages
11 years ago
0
0
jamarek00
Teacher
•
7 Messages
11 years ago
Thanks sadath_l! Can I set this be set up through the TV menu too?
0
0
SadathCS
Employee
•
581 Messages
11 years ago
Yes, for the caller ID setup on the TV you will need to go to channel 9901. Select Voice Services. Then Caller ID Settings. To enable option for caller ID put a check on the phone number.
0
0
Bobg1946
Contributor
•
3 Messages
8 years ago
I do not have the option of Caller ID in tv. I can only see the first four lines. What do I do next? also channel 9901 says channel not available. Went thru menu and set up Caller ID. it is set ON. still no caller ID.
0
0
skeeterintexas
ACE - Expert
•
27.7K Messages
8 years ago
Phone Services is channel 9900.
0
0
Bobg1946
Contributor
•
3 Messages
8 years ago
9900 says channel not available
0
0
skeeterintexas
ACE - Expert
•
27.7K Messages
8 years ago
Do you have Uvoice VOIP? Uvoice works with Uverse TV.
If you have DirectTV I have no idea. Perhaps someone with DirectTV can help out.
0
0
aviewer
Expert
•
10.1K Messages
8 years ago
DirecTV has a "standard analog rj-11 jack to connect to the tel line & requires an option setting somewher in the menu - on older models.
I beleive the newer models do not have the tel jack.
0
0
directv100
Scholar
•
375 Messages
8 years ago
Do you have U-Verse TV or DirecTV ?
0
0
skeeterintexas
ACE - Expert
•
27.7K Messages
8 years ago
I believe @Bobg1946 has Direct TV.
0
0