
Contributor
•
1 Message
Remote Control Sound Bar Setup
I recently purchased and setup a Samsung HW-F355 AudioBar. It is working properly, however I wanted to control the Power/Volume Control from my U-Verse Remote. I attempted to look up the codes and manually input the codes and nothing seems to work.
I then did the OK/Att 955 trick, and that did not work either. Instead, now I can’t control the volume of the TV, which is annoying.
I basically want to know if it’s possible to control the Power/Volume of the Soundbar from my Uverse control? If not, how do I go back so that my volume button on the Uverse control raises the Volume of the TV?
aviewer
Expert
•
10.1K Messages
9 years ago
AlexD2003 - To restore TV sound when in att mode - att/ok - 955 - TV - enter.
Can you control soundbar with U-verse remote? Maybe
First step is to find the right code. If you get off/on to work on a code, second step is to stop TV from ALWAYS controlling sound.
You have three choices -
1. Always the soundbar - att/ok -955- aux -enter.
2 follow the mode button - att/ok -955 - enter While watching push TV or aux to control the right device.
The third choice uses the same programming as #2. Set the STB sound to 15. Set both the TV & soundar sound to comfortable level. While watching in att mode you will vary the STB sound that comes out either the TV or the soundbar.
If you cannot vary the volume on the soundbar, keep searching for a code. If you cannot find a code, you can use option 3 or get a new remote.
Two possible remotes - Logitech Harmony model 350 or http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=RCRP05BR
0
0