Don’t miss your chance to add AT&T Protect Advantage. Peace of mind, starting at $15 per month. Open enrollment ends 3/31. See all protection plans.
Question about U-Verse Installation (RG placement / Coax vs CAT5)
U-Verse just arrived in my neighborhood (new VRAD just went in >500 feet away) and I'm considering making the switch. I have a few questions first however. I live in a newer two story home with a basement, that is wired with coax throughout (but not CAT5). Due to the nature of my work, it is essential that I have a hard line to the internet in my office on the top floor. My question is; even though the cable/phone/etc comes into the house in the basement, is it possible for the installer to install the residential gateway in my office? Will he need to run CAT5, and if so, could he simply terminate it in a dual coax/ethernet wall plate without cutting any additional holes in my walls (using the existing cable as a guide to feed the new cable)? For the sake of simplicity, would it be possible to run the one length of CAT5 to my office, and then have all of the other boxes (four in total, two HD) running off of coax? I'm trying to get a feel for how many holes need to be drilled in my floors and/or walls to make this work (I'm not that eager to switch if the answer is more than one or two). I realize that coax can be used by itself with an adapter of some sort, but from what I've read, that really isn't the way to go if you can help it. Doing it that way, could the RG be placed in the upstairs office? I'd rather have CAT5 directly to it, but if it can be done simpler with coax (assuming the RG can be upstairs) I'd be willing to compromise. Sorry if this has been asked before, but I couldn't find my specific issue addressed previously (if it has been, feel free to forward me there). Thank you in advance for your assistance.