I have the wireless internet homebase mf279.  I’m trying to set it up to have an open NAT on my Xbox.  I have it hooked up straight to my Xbox through the Ethernet cord provided.  I have tried port forwarding, enabling uPnP, and also tried putting my Xbox IP address into the dmz mode on my routers s

I am trying to set up a remote desktop (Windows 10 RDP) between two laptops in my home wifi network.   My problem:   When accessing PC2 from PC1 (or PC1 from PC2), the connection will be down when I reboot PC2 (or PC1) remotely. It seems PC2 cannot automatically port itself afte

We have Uverse Gigapower using an ARRIS NVG599. I have port forwarding setup for port 8080 to point to a specific machine. When I attempt to telnet to this port, the connection is refused. When I run an external port scan, it shows closed, which they define this as the port is responding but nothing

Just had AT&T Fiber installed and I am thrilled with the speed and responsiveness of the network.. goodbye Comcast!  (well not quite goodbye yet..)PROBLEM:  I've used Remote Desktop Connection for years on multiple routers and service providers.  Never had a problem with Port Forwarding in the past.

Recently upgraded from Internet 12 to Internet 50 and with that came a BGW210-700 modem/router.  After setting up Port Forwarding for my cameras and a web stream, I noticed nothing was working.  I rebooted the system and voila!  Everything worked... for a moment.  (Full disclosure... this has been s

My mother just received a new router for her Uverse account. I have IP cameras set up in her home and I cannot view them from my home.Please advise with steps to resolve. Circe Denyer

I have the wireless internet homebase mf279.  I’m trying to set it up to have an open NAT on my Xbox.  I have it hooked up straight to my Xbox through the Ethernet cord provided.  I have tried port forwarding, enabling uPnP, and also tried putting my Xbox IP address into the dmz mode on my routers s

Hello I have recently changed to ATT internet about 3 days ago. Since my switch to ATT Internet my security camera is unable to successfully upload the pictures and videos captured from my camera to my centralized storage on my computer, which is set up as an FTP server. I had issues with accessing

I am trying to forward port 12345 to my EdgeRouter through the AT&T Arris Gateway.  However, the traffic is NOT passing.  Currently, the Arris Gateway is running in PassThrough/Bridge mode.  What am I doing incorrectly?  Turned off all the firewall rules, and the NAT filters on the Arris gateway.  I

I moved a year and a half ago to north of Austin TX and was given the 5031NV which replaced my NVG510. The 5031NV has not let me port forward in the time that i have had it, I have searched every forum and read every tutorial following even the smallest detail to a T.  Here is what i have tried. Sta

Issues:Disconnects from the internet frequently. When i do a "full diagnostic" it fails at the DSL part.Port Forwarding isn't working. I heard it was because of the 1.6.7 firmware update.  Light Blinks Red and Green. The internet (when it's up) is slower than usual.During Downtime, The "Line State",

Hello, I am trying to set up port forwarding on my router so that I can have an open NAT type for my xbox one. I need to open the following ports: TCP: 53,80,3074 UDP: 53,88,500,3074,3544,4500 So to do so I created 9 custom hosted applications with each of the ports. The issue I'm running into

Hello, I have Gigabit internet connected through NVG599. I have recently connected the Ring Alarm system to the router, directly via ethernet into LAN-2.     Everything is fine, except for one very unusual problem.  Sometimes, at completely random intervals, the alarm system goes

Hi,I followed the guide on port forwarding, but I'm still having issues accessing a VNC server on my raspberry pi. I know the problem is strictly with my router settings because I have been able to access the raspberry pi with VNC on a different router. The ports that I'm using for VNC are 5800 and

For years I had a 2-wire router and had it configured to port forward 2 ports for my surveillance DVR. Worked beautifully for years without having to buy a static IP address. The router started acting up and AT&T sent me a new one (same 2 wire model). I duplicated the port forwarding settings on the

ssh is the standard for secure connections between networked computers, , and 22 is the standard port used by ssh.For secure connections (over the internet) to my home computer, I had my u-verse modem forward port 22 to my desktop machine.(On the modem Arris NVG599, this type of setup option is in t

I'm trying to get my network back up after a failure. The failure happened when AT&T tech support mucked with my configuration to fix my non-working WiFi. Here's my configuration: AT&T fiber connection -> 6852 Gateway -> CISCO RVS4000 router -> User machines and servers. I have a

Hello all,  I have scoured the internet and this forum to find out how to make the port forwarding work on this particular router. I have configured it per instructions found here: https://www.att.com/esupport/article.jsp?sid=KB413180&cv=812&DPSLogout=true&_requestid=1327025 My ports are still not v

Hello Community, I have been struggling to get my ftp connection on my LAN. I have been with ATT support for many times and hours trying to get my internal FTP services to work properly. Every trine I am with the phone with support they perform actions that often does not make sense. I just had a ca

Anyone have any experience with port forwarding on a U-Verse (Pace) 5268AC for a Barix Instreamer 100?I am able to see the device on the LAN and have set up a TCP port, but I'm not sure it is getting through the firewall.Without a lot of other details here, if you have any experience, please respond