We recently had our ATT gateway updated to the Pace 5286AC.When the technician came out to set up the new gateway, he modified the firewallsettings of Applications and pinholes to allow his iphone through the firewall. I want to remove his phone but I cannot find out how to remove a device from the

Our 5G wifi network is suddenly not showing up.  Modem is a Pace 5268AC. The 2.4 G network works but the 5G network has disappeared.  Any ideas?

My understanding is that the FCC mandates that all VOIP residential phone service gateways have battery backups of some-sort so that 911 service can be maintained during power outages.  However I have observed that recently AT&T has stopped provding batteries for their RGs (in this case the Pace 526

I am curious to know if anyone can confirm if the PACE 5268AC router supports or does not support UPNP (universal plug n play)? I suspect that it does not. I recently upgraded my Internet with AT&T and found my WD My Cloud (Model: WDBCTL0040HWT-NESN - the 4 TB one) to be useless. The router refuses

I'm new to U-verse (last week signed up for internet and TV).  At the same time my U-verse was installed I recieved a WD Mycloud as a gift. When I went to install Mycloud storage unit the Ethernet slot on the back of my Pace 5268ac wouldn't light up.  The slot was dead. The Mycloud just blinked mean

Hopefully someone can help me resolve this. My Pace 5268AC loses connection at 10:08pm, 10:12pm, and then again at 10:16pm everynight. Is it checking for updates and updating firm/software? Is there anyway to check what time it is suppost to update. I looked in the system settings and under everytab

Hello, I have come to U-verse from Comcast.  So far I like what I'm getting.  The only hang up has been my lack of ability to view my 3 wireless Foscam cameras remotely off my network.  While with Comcast, I used my own modem and my Apple Airport Extreme (AE) router and never had any issues.  Once I

RG: PACE 5268ACPrinter: Brother MFC 9130CWComputer: Apple iMac Problem: I connect my printer on the RG.  I do not broadcast an SSID, but I have temporarily tried broadcasting it to see if that was the problem; it was not.  In addition, the RG does not allow me to restrict connections by hardware add

I have followed all of the steps in the solution of this:https://forums.att.com/t5/AT-T-Internet-Equipment/I-have-a-Pace-5268AC-Router-how-to-put-it-in-Bridge-Mode/td-p/4330866The Pace sees my router and is allowing it however when I plug in the ethernet cord to my router I get nothing, no Wi-Fi or

Has anyone experienced VPN rule disappearing from the firewall on the Pace 5268AC? This issue happened both before and after the latest firmware. According to tech support, AT&T has no knowledge of this issue. The work-around is simply to re-add the VPN rule to the device firewall, but that’s not a

Back in 2002 When "Return to Castle Wolfenstein" enabled people to set up a server life was good....I pine for those days. I have screwed around with this Pace 2 wire and although I can get a server going. It will only successfully open my internal lan ip address. I have even used Various port ch

I have been a very happy AT&T fiber customers with 1GB wired downloads. I added 3 Nest cameras, laptops, TV, etc and my wireless download slowed to 5Mbps. I knew I needed to get a modern wifi 6 router to handle the wireless load. I just added a new Netgear Night Hawk AX12 configured behind  my PACE

I was having a problem with throughput speed on my Samsung smart TV and wanted to access the Gateway admin pages. However, I keep getting the message "Page not Found" when I use either http://192.168.1.254 as stated in some of the help documents or using http://attlocal.net.   The Smart Home

I cannot figure out how to set up Wake On LAN for my PLEX server (Windows 10/NUC Skull Canyon) via Pace 5268ac router. I have the UDP port 9 open against the PLEX server on the router side (along with PLEX port) and the server has Wake on LAN enabled for the network card in the BIOS and network card

I've been trying to use my own router instead of the AT&T supplied modem. One day I was successfully able to get it to work, but that only lasted for a few hours until suddenly everything quit working. I have the following modem: Manufacturer Pace Plc Model 5268AC

HP Envy laptop running windows 10.  Brother MFC 7360N printer connected to the modem/router by ethernet.  AT&T Pace 5268ac modem/router.  The laptop used to print wirelessly through the modem/router to the wired printer.  Now it doesn't.  If I connect the computer by ethernet to the modem it prints

I don't even know where to start but have had multiple techs out to fix this and still is flakey. So, I downloaded the PACE manual and set things up myself and it got much better. I setup my IP range as an 'Alternate Network' and have the computer with those IP addresses directly plugged into the m

I have just upgraded from an older (AT&T) standard ADSL service to ADSL2+, and am not exactly sure how to get IPv6 working in my current configuration.   My old setup was simple:  ASUS RT-AC66U -> plain DSL modem.  The ASUS handled the PPoE sign in, etc., and was configured for using IPv6 using 6rd

I recently have had fiber U-verse installed, and the internet gateway supplied to me is the Pace 5268AC, which is a gateway with 5GHz Wifi + an analog terminal adapter which supplies analog phones with dial tone using inside wiring. I thought it was nifty, but am becoming more and more disillusioned

Community / Expert Help Very Much Appreciated Starting to have significant WiFi range, speed and drop out problems with the AT&T provided Pace integrated modem / router / WiFi system due to any number of factors, not the least of which being additional client devices and home layout/configuration. T